User Guide
138
6. Press the Menu soft key and select Activate. Notice not to press any key to leave the
current screen.
7. Connect your Smartphone to the desktop computer, and insert the Companion CD into the
CD-ROM drive of the desktop computer.
8. The installation of the USB driver will start automatically. If needed, browse for the USB
driver on the Companion CD.
9. Open the Device Manager on the desktop computer by clicking Start Control Panel
System Hardware (for Windows 2000/XP/2003) Device Manager.
10. Open the Modem item, right-click on USB Modem, and select Properties.
11. Open the Advanced page, enter +CGDCONT=1,“IP”,“MMS” under Extra
initialization commands, and click OK.
_ NOTE`
Depending on your service provider, the string for you to enter may not be “MMS.” To make sure
of the correct string to enter, on the Home screen press the Start soft key Settings Data
Connections the Menu soft key Edit Connections GPRS Connections select
your GPRS connection the Menu soft key Edit Access point.
12. On your desktop computer, create a dial-up connection using your Smartphone as the
modem, enter *99# for the phone number and user name; you do not need to set up the
password.
_ NOTE`
For information on creating a dial-up connection on the desktop computer, see the documents
that came with the operating system.
You are advised to set the baud rate to at least 115200.
13. Click Dial on your dial-up connection screen. The icon appears on the task bar after
the successful dial-up connection.
14. To end the connection, right-click on the
icon on the desktop computer and select
Disconnect. Or, press the right soft key on the Smartphone Deactivate.