User's Manual

Managing Your A700 4-3
USB
You can establish a synchronization partnership between A700 and the desktop
computer, or simply use A700 as a card reader. The default setting is
ActiveSync
mode
. Note that you do not need to disable the USB connection in ActiveSync
on the desktop computer when using the card reader mode.
Camera
When you use the camera indoors, you can select 50Hz or 60Hz to match the
flicker frequency of the fluorescent lamp.
Power-Saving Tips
Follow these suggestions to maximize the battery’s operating time, particularly
when you are relying solely on the battery power for extended time periods.
 Suspend or turn off the device frequently.
By default, the screen backlight will automatically turn off and A700 will
also suspend when it has been idle for a period of time. You can shorten the
length of the idle time using

Settings  System  Power  Advanced
to set up.
Press the
End button for 3 seconds until the Quick List appears and then
tap
Power off to turn off your A700 when it is not in use, even for a short
time.
 Turn off functions not needed or adjust settings.
 Lower the volume.
 Do not enable sounds or light flashing except for the most necessary
notifications. Tap

Settings  Personal  Sounds & Notifications to
set up.
 Remove the SD/MMC card, if installed, from the slot if you are not
using it.
 Close the map program and remove the map card from the slot if you
are not using the program.