User Manual MioMap™ v3.2 Navigation software for Mio DigiWalker C210 UK English August, 2006 (v1.
Copyright note The product and the information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Mio Technology Limited. © 2006 Mio Technology Limited © 2006 Nav N Go Kft. Whereis® map data is © 2006 Telstra Corporation Limited and its licensors Data Source © 2006 Tele Atlas N.V.
Thank you for choosing MioMap as your door-to-door in-car navigator. Read the Quick Start Guide first and start using MioMap right away. This document is the detailed description of the software. Although MioMap can easily be discovered by experience, it is still recommended that you read through this manual to clearly understand the exact function of each button and icon.
Table of Contents 1 2 3 Warnings and safety information......................................................................... 8 General information............................................................................................. 9 Operating MioMap (Controls) ............................................................................ 10 3.1.1 Power on/off........................................................................................ 10 3.1.2 Main menu ..............................
4.2.13 Cursor menu (No. 15) ......................................................................... 26 4.2.14 Current street (No. 16) ........................................................................ 28 4.2.15 Travel and Route data (No. 17) .......................................................... 28 4.2.16 Distance to next turn (No. 18) ............................................................. 28 4.2.17 Next street / Next settlement (No. 19).................................................
4.7.1 List of TMC messages ........................................................................ 49 4.7.2 TMC control centre ............................................................................. 50 4.7.2.1 Selected FM radio station................................................................ 50 4.7.2.2 Exclude selected station.................................................................. 50 4.7.2.3 Show excluded stations...................................................................
6.3.3.1 Unpaved Roads .............................................................................. 70 6.3.3.2 Motorways....................................................................................... 70 6.3.3.3 Ferries ............................................................................................. 71 6.3.3.4 U-turns ............................................................................................ 71 6.3.3.5 Permit needed......................................................
1 Warnings and safety information MioMap is a navigation system that helps you find your way to your selected destination. It will determine your exact location with the help of an attached GPS device. The position information obtained from the GPS receiver will not be transmitted anywhere, so others will not be able to track you by the help of this program. If you are the driver of the vehicle, we recommend that you operate MioMap before beginning your journey.
2 General information MioMap is a navigation system optimised for in-car use. It provides door-to-door navigation for both single and multi-point routes using adaptable route parameters. MioMap is capable of planning routes throughout the whole map region installed on the memory card. Unlike some other products, MioMap does not require that you change maps or switch to a poorly detailed general map to navigate between map segments or countries. You always have complete freedom to go wherever you wish.
3 Operating MioMap (Controls) MioMap is designed for easy operation. All controls are operable by fingertips. Wherever possible, pushbuttons and lists are provided to make accessing functions or changing settings as easy as possible. 3.1.1 Power on/off Use this button to turn the power of the Mio DigiWalker C210 on or off any time. When you turn the device back on, MioMap will continue the navigation as soon as the built-in GPS determines the location again.
Tap one of the icons to set/change the value. 3.2.2 List selectors When the values in the list need to be named, only the current value is shown (sometimes together with a short description) in a horizontal stripe with arrows at both ends. to move left in the list or tap to move right. The arrows are buttons. Tap You need not confirm your selection. As soon as you leave the screen, the selected value becomes effective. 3.2.
When the tick mark is missing , the function is not selected. When it is displayed , the function is enabled. The whole strip works as a button. Tap anywhere to toggle between the enabled and disabled status. 3.2.5 Switches in the Quick menu The switches of the Quick menu (Page 35) behave as normal switches but they look different in order to fit in with the other menu buttons. Tap the button to toggle between the two states.
3.2.6.2 The numeric keyboard The numeric keyboard only contains numbers, on huge buttons. The special keys you find on the other keyboards (except Space) are available here as well. Although QWERTY-type keyboards also contain number keys, when entering a house number, the program offers the more convenient numeric keypad.
4 Discovering the program through the screens The best way to discover MioMap is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. 4.1 The map The most important and most frequently used screens of MioMap are the two screens with the map (Map screen and Cockpit screen). They are similar in look and in possible controls but are optimised for different uses. The map they display is common. The elements of the map are described here.
other hand, 3D mode in Track-up Cockpit mode with Smart Zoom makes navigation very comfortable. The description of these modes will come later in this manual. 4.1.2 Zoom levels MioMap uses high quality vector maps that let you see the map at various zoom levels, always with optimised content. Street names and other text objects are always displayed with the same font size, never upside down, and you only see as many streets and objects as needed to find your way around the map.
You can change between day and night views manually in the Quick Menu (Page 36) or let MioMap do it automatically (Page 64) for you. Note: The automatic day/night mode is based upon the current date and GPS position by which MioMap calculates the exact sunrise and sunset times on the particular day at the particular location.
You need not choose between the two modes. MioMap will use the one best for the current tilt and zoom level. Zoom in to have only a few streets on the map, and start tilting up and down to see how MioMap switches between the two modes in an instant. Note: The automatic switching is on even when using Smart Zoom. At first you may find it odd, but later you will discover how it adjusts the displayed information to the current view of the map.
4.1.7.2 Animated turn guidance Animated arrows represent all route events other than the above-mentioned special points. These arrows show the direction in which you need to continue your journey. 4.1.7.3 The route line The line representing the planned route is displayed in orange with both daylight and night colours. In both cases it is the most conspicuous part of the map even when in the background of a 3D map view.
4.2 Screens with map Having explained the contents of the map, the description of the other parts of the map screens follows. There are two map screens: the Map screen and the Cockpit screen. The way they show the map is the same but their look and controls are optimised for different purposes. The Map screen is to be used mainly without a GPS, to browse the map, create user POI items, or to plan your route based on map points. The Map screen is designed to give you the maximum map area.
No.
No. Display Control turn**** 21 Current speed limit***** n/a * On Map screen only when a route is active ** Contents differ when a route is active *** Appears only when a route is active **** Appears only when a route is active and the next turn is near ***** Appears only if speed limit is known for the current road 4.2.1 Turn preview (No. 1) On the Cockpit screen this field shows a graphic illustration of the next manoeuvre.
manoeuvre). If you manually change the zoom level, Smart Zoom will no longer scale the map by itself (automatic tilting and rotating remains active). You need to tap the Lock button (Page 22) to return the zoom control to Smart Zoom. If you are on the Cockpit screen, MioMap will do this automatically if you leave the display untouched for 30 seconds. 4.2.3 Tilt up and down (No. 4 & 5) These semi-transparent buttons are only displayed if "Zoom & Tilt" is enabled in the Quick menu (Page 35).
Note: When the Cockpit screen is open, you do not need to tap the Lock button. Just wait for 30 seconds without tapping the screen, and MioMap will automatically reenable Lock-to-Position and/or Smart Zoom. If you tap the screen during this period, the 30 seconds countdown will restart. 4.2.5 Cursor (No.
Tap this icon to switch to North-up mode. Now the map is fixed to keep facing North. The icon changes to show the new rotation mode. Tap the icon again to enter Overview mode. This mode looks similar to the North-up mode with one difference: the zoom level in this mode has a fixed default to give you a better look of where you are on the map.
• When small car symbols are displayed under the dish, TMC information is available. 4.2.10 Battery status (No. 12) The status of the battery is also shown by MioMap. You can estimate the available power reserve from the length of the bar inside. Some examples: • The thunderbolt in the battery shows the battery is being charged. • Battery is not charging, but it is at full capacity. • Battery in not full, but there is sufficient reserve capacity.
During track log playback a green icon will blink. Tapping this icon (in fact, tapping the screen anywhere) stops the simulation. 4.2.13 Cursor menu (No. 15) The Cursor is the selected point on the map (marked by a red dot and radiating red circles around it), or the current GPS position when it is available and Lock-toPosition is enabled. When you tap the screen to place the Cursor, the Cursor menu pops up automatically to give you the list of possible functions you can use the Cursor for.
• Add Via: by inserting the selected map point as a via, you instruct MioMap to cross this location before the destination of the route. This is the way to build a multi-point route in reverse order (when you wish to insert a stopover ‘go to A but first get some fuel at B’ or want to influence the direction of the route). This menu point works only if a route is already active. • Remove Via: removes the ‘via point’ near or at the Cursor.
is only available in the Map screen and if there is at least one POI item near the Cursor. 4.2.14 Current street (No. 16) This field of the Cockpit screen shows the name or number (as available) of the current street or road you are driving on. 4.2.15 Travel and Route data (No. 17) The contents of these three fields are different when cruising (without an active route) or navigating (following an active route). While cruising, the fields show the present speed, and the time of day.
This field is only displayed when navigating a route. 4.2.18 Approaching next turn (No. 20) This bar is only visible when approaching the next route event. It appears on the screen to visualise the distance when you get closer than 300 meters (1000 feet) to the next turn, and it remains visible till you reach the turn. This field is displayed only when navigating a route. 4.2.19 Current speed limit (No.
bars are for the grey and orange bars are for the green satellites. To identify satellites use their numbers also shown in the virtual sky. The more satellites your GPS tracks (the green ones), the better your calculated position will be. Additional pieces of information on this screen are: current position in latitude/longitude format, elevation, speed, date, time and calculated accuracy. Note: Accuracy can be affected by several factors the GPS cannot take into account.
4.3.4 Time synchronization In the top right corner of the screen you have another button that leads to a new screen where you can synchronize the clock of your PNA to the very accurate time provided by the connected GPS. Turn on the Auto Correction switch to let MioMap frequently check and correct the PNA time with the GPS time. Below that button you will see the current values of the GPS and the PNA clocks. button to You can check here whether any correction is needed.
When you open the screen, all fields contain information on reaching your final destination. Tap any of the fields to see data on the via points starting from the first one through the final destination again. 4.4.1.1 Route line The upper part of this screen shows your planned route as a horizontal line. Its leftmost point is the start of the route, the rightmost one is the final destination, and you can see your via point flags along the line, spaced in proportion to their distance.
4.4.1.4 Time Left This is an estimated value that can also be displayed in one of the Route data fields on the Cockpit screen as ‘Time to destination’. It shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route. The calculation cannot take into account traffic jams and other possible delays. If via points exist, tap and tap again any of the fields to see the time needed to reach the first, second, etc. via point. 4.4.1.
• This icon shows that you need to board a ferry along the recommended route. • This icon shows that you need to pay for the ferry. • This icon is displayed when MioMap could not plan a route with all your road type preferences respected. Sometimes it is impossible to find a suitable route near the start or the destination. • This icon warns you that MioMap had to recommend a route that does not match all your preferences given at the Route Parameters settings.
Tapping this button brings up a menu that allows you to access some of the most frequently used functions of MioMap. 4.5.1 Find tab The first page of the Menu is Find. It lets you select a destination without first having to locate it on the map. The Find menu will be described in detail later here: Page 53. 4.5.2 Quick tab This provides quick access to some configurable options.
4.5.2.2 Daylight & Night Modes (switch) This button switches between the daylight and night colour schemes of MioMap. The states of this button are: Turn on or off the night colours manually to override the automatic colour scheme switching. Note: Using this option turns off the Automatic Night Colours feature. You need to reenable it at the General settings screen (Page 63) to have the colours change automatically again. 4.5.2.
If you highlight any of the POI groups by tapping them, the button in the bottom left corner will become Show if the POI group is hidden, or Hide if the group is shown or partly shown. Tip: To make a partly shown group fully shown, tap this button twice. First you will hide the whole group, and then you will have it displayed with all its subgroups. Tapping again the highlighted POI group (except for My POI – described later) opens the list of subcategories of that group.
• Show/Hide: similarly to built-in POIs, you have the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden. • New: you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the POI is still visible on the map (provided you let the POI group be displayed at all). You do not necessarily need to create POI groups in advance.
• Delete: you can delete any of your previously saved POIs. MioMap will ask you to confirm this action. 4.5.2.4 Popup Information (switch) This button enables or disables the popup information of the Cursor on the map screens. The states of this button are: When this feature is enabled, tapping the screen (activating the Cursor, a radiating red dot) on either of the map screens also opens a pop-up box with the selected street name, house number and the name of the nearby POIs, if any.
Each track log has a colour, shown to the left of its name when the track log is visible on the map. If the track is not visible, an underscore character is shown here. Tapping the line of the highlighted track log will toggle between showing and hiding that log. The track log will be drawn on the map using the colour next to its name. When a track log is being recorded, a new line appears in this list with an underscore, as newly recorded track logs are not shown in the map normally.
• Delete: you can delete a track log if it is not needed any more. MioMap will ask you to confirm this action. 4.5.3 Route tab This menu contains options to manage different settings in the program. 4.5.3.1 Recalculate This menu point is only available if an active route exists and GPS position is present. It brings up a menu with four options. Using one of these functions you can modify the current route.
When you run into a traffic jam or roadblock, you may want to have MioMap calculate a route that departs the original route as soon as it can. You will need to select the minimum distance along the original route where your new route is allowed to rejoin the original route. Select the one you feel appropriate for the traffic difficulty you face. Note: This function is to give you an alternative for the next section of the recommended route.
Display modes are different only in the number of events displayed in the list. List items are always shown with all information available including pictograms of the needed action and distance of the event from the previous list item. The Itinerary is live and constantly updated when navigating a route. The list item coming next in navigation is the highlighted one until you highlight another one by tapping. After that, the highlight remains on the item you have selected.
route, or a roadblock is announced on the radio, and you find that road in your Itinerary. • Distances: you can also find some distance buttons in this list. They are similar to the ones in the Bypass list of the Recalculate menu (Page 41), but these can also be used for distant parts of the route. Note: You need not open Itinerary if you run into a roadblock or traffic jam. To get an immediate alternative route use the Bypass function of Recalculate (Page 41).
recalculated the route. This means the list is permanently updated, and via points drop out during the journey. The last item in the list is your final destination. Use the arrows on the right to browse through the list and tap any line to highlight it. You can perform the following operations: • Add: you can add a new route point (or a new final destination if the highlighted item is the last one in the list) after the selected point.
4.5.4 Main button The Main button at the bottom right corner leads to the Main menu screen described here: Main menu. 4.6 Speed cameras There is a built-in database of fixed and mobile speed cameras. It is also possible to add new cameras to enhance this database. MioMap can warn you when you approach one of these cameras. You can fine-tune this warning in General settings (Page 63). Speed cameras are displayed with small camera symbols on the map. 4.6.
These cameras are displayed with the following symbol: 4.6.1.3 Built-in cameras Some cameras are built in traffic lights. They work like fixed cameras, but they are difficult to spot. The warning for proximity and speeding is the same as for the fixed cameras. These cameras are displayed with the following symbol: 4.6.1.4 Section control cameras These cameras work in pairs, and do not measure your current speed but your average speed between the two cameras.
4.6.2 Controlled traffic direction The different cameras can measure the speed of one direction of the traffic, both directions, or even several directions in an intersection, when they are mounted on a rotating base. MioMap warns you only if you drive in a measured or possibly measured direction. The measured direction of the cameras are displayed with the following symbols: 4.6.
4.7 TMC (Traffic Message Channel) MioMap can provide you with even better routes if Traffic Message Channel (TMC) information is available. The TMC is a specific application of the FM Radio Data System (RDS) used for broadcasting real-time traffic and weather information. Note: TMC is not a global service. It may not be available in your country or region. Ask your local dealer for coverage details. You need a TMC receiver attached to your PNA to receive TMC information.
Tap the arrows to turn the page, and see traffic difficulties farther away from your current position, or press Settings to configure the TMC subsystem. This opens a new window. 4.7.2 TMC control centre This screen shows the selected TMC source and allows you to change the TMC settings. 4.7.2.
4.7.2.4 Sorts events by distance / type The list of traffic events can be ordered by their distance from the current position, or by their type. Tap this button to toggle between the two possibilities. 4.7.2.5 Use traffic information This button is enabled by default, which means that TMC messages are used in route planning. Tap this button to have MioMap ignore real-time traffic information when planning routes.
5 Find One of the most frequently used functions of MioMap is selecting the destination. Once you have the destination, you can start navigating. Getting to this point should be as fast as possible. MioMap provides you with a versatile search engine designed to find your chosen destination after only a few taps on the screen.
automatically. When you open it manually, it will remain until you close it or switch to another screen. Tip: If you want the selected point shown in the centre of the map, close and reopen the menu or wait until it closes and open it again. By opening the Cursor menu manually, the map will be moved to have the selected location in the centre. 5.3 Using the Find menu The Find menu is accessible by the Menu buttons of the map screens (Main menu).
You enter the module at Level 3. From this point you can go forward (down) to give the name of the street, then the house number or intersection, or backward (up) to change the city, state or country to search. 5.3.1.1 Selecting the city, state and country to search in The first screen of the address-search module is the list of recently used cities (and states in Australia). The first line of the list is always the city you are in or near to (Europe, Asia and USA), or state you are in (Australia).
some digits of its postcode, then select from the list of results automatically given by the program if the matching items can be displayed on one page, or displayed on more pages if you tap Done after entering some letters. Note: Postcodes may not be available for the selected country. In this case you need to enter the name of the settlement. You can accomplish this by using an alphabetic input screen (either an ABC- or a QWERTY-type).
Note: If any of the settlements listed has named suburbs or numbered districts that also appear separately in the map, a Show districts button will appear in the bottom left corner. Tap this button to list the suburbs together with the main settlements. Now the button turns to Hide districts, and tapping it will return to the original, shorter result list. Once you have selected the city, you can continue by entering the street name as described here: Selecting a street or the centre of the settlement.
If your destination is in another country, tap the Change Country button in the top right corner of the state selection screen (Australia and USA), or the city selection screen (Europe and Asia), and select the country from the list. 5.3.1.2 Selecting a house number or the midpoint of the street Once the country, the city and the street name are selected, you are asked to give the house number using the numeric keypad.
5.3.1.4 An example for a full address search This is an example for the most complex address search, finding an address from abroad. In this example your current position is not in France, and you are looking for an address in Paris, France, the address ’17 rue d’Uzès’. The following steps shall be taken after entering the Find Address section: • You see the list of recently used cities. Paris does not appear in the list. • Tap Other City in the top right corner.
5.3.3 Find Coordinates MioMap also lets you enter your destination by map coordinates. The coordinates need to be in latitude/longitude format and, based on the WGS84 earth model (the one used by most GPS devices). When you enter this page, the coordinates of the current GPS position (or the selected map point, the Cursor, if Lock-to-Position is inactive) are shown at the top of the display.
screen you can see the first page of the top level POI categories. There are three levels altogether. The search will be carried out around a certain reference point. Always look at the current reference point shown in the green field above the POI category buttons and confirm that it matches what you want. To change the reference, tap the Change ref. button in the top right corner. Once you tap the Change ref.
• Filter from all the POIs of that level: tapping the Filter button will bring up a text input screen to let you narrow the list of POIs. If you tap Filter in the list of subgroups, you will only search in the group you are already in. • See all POIs of the current group in a list: tapping the All button opens the list of all points in the group or subgroup you are already in. Use the Next and Previous buttons to browse through the list.
Note: If you try to access a favourite destination that you have not yet set up, MioMap will lead you to the setup page.
6 Settings MioMap provides several settings in order to let you customise the functions of the program. The Settings screen can be accessed directly from the Main menu screen (Main menu) and from the map screens by using the battery icon (Page 25), while some of its sub-screens are accessible from other parts of the program. 6.1 General settings These are the basic settings of MioMap. 6.1.1 Safety Mode Safety mode will disable the touch-screen above 10 km/h (6 mph) to keep your attention on the road.
6.1.2 Automatic Night Colours Using the automatic night mode, MioMap will change between the daylight and night colour schemes a few minutes before sunrise and a few minutes after sunset based on the time and location information provided by your GPS. Once you set a permanent colour scheme in the Quick menu (Page 36), this automatic mode turns off. If you need MioMap to switch between colours for you again, you need to reenable this feature. 6.1.
Example: to let you better understand how this feature works, here is an example. If you use the setting on the left (portrait) screen example (+10 km/h – 100 km/h – +5%), MioMap will warn you when driving at the following speeds: Speed limit Warning at 40 km/h 50 km/h (=40 km/h + 10 km/h) 60 km/h 70 km/h (=60 km/h + 10 km/h) 90 km/h 100 km/h (=90 km/h + 10 km/h) 100 km/h 105 km/h (=100 km/h + 5%) 120 km/h 126 km/h (=120 km/h + 5%) 160 km/h 168 km/h (=160 km/h + 5%) 6.1.
You are warned well in advance. The distance MioMap starts warning you before reaching the camera depends on your speed. The higher the speed, the earlier the warning starts. 6.1.5.2 Visible Warning Besides this, MioMap can pop up a visual warning with only the symbol of the camera above the speed limit sign on the Cockpit screen, or you can ask for details as described below.
You can rename them and specify their locations. To determine the location you can use the same Find menu options (Page 53) as for a route destination, and depending on that choice and the information available, the location will be shown here as a street address, a latitude/longitude position, or both. Note: If you tap either of your favourite destinations in the Find menu (Page 61) before defining it, MioMap will offer to take you to this screen to set it up. 6.1.
6.2.1 Master sound volume/switch The position of this fader determines the device volume level. The left part of this control works as a mute button. Tap to mute all MioMap sounds. This works in tandem with the Mute button (Page 25) on the map screens. Switching one of them will change the status of the other. 6.2.2 Voice guidance volume/switch The switch on the left can turn on or mute MioMap's audible guidance (voice instructions and speed camera warning).
6.2.5 Attention Tone If this is set to Disabled, the voice guidance will sound without a preceding attention tone. Setting it to Single Tone will initiate a single attention tone before the instructions, while Double Tone will use a double tone. Note: The Mute function (Page 25) accessible from the map screens overrides the settings on this screen. When MioMap is muted, all sounds disappear. These settings will not be changed; only the output will be muted temporarily. 6.
6.3.1.3 Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if there is another route taking a bit more time but a lot less distance compared to the fastest one, MioMap will choose this one instead to save fuel. 6.3.2 Vehicle You can set the type of the vehicle that you will use to navigate the route. Based upon this setting, some of the road types will be excluded from the route (e.g.
6.3.3.3 Ferries The accessibility of temporary ferries is not necessarily included in the map data. Furthermore you may need to pay fare, so you may consider disabling them from the preset enabled status. 6.3.3.4 U-turns Although displayed amongst road types, this is a type of action. Most drivers prefer to replace them with a few normal left and/or right turns in the next few junctions, so it is disabled by default. Turning back on dual carriageways is not considered as a u-turn.
6.4.1 Program language This button displays the current written language of the program. By tapping the button you can select from a list of available languages. MioMap will have to be restarted if you change this setting. MioMap will ask for confirmation before it restarts. 6.4.2 Voice language This button shows the current language of the voice guidance. By tapping the button you can select from a list of available languages and speakers. Tap any of these to hear a sample voice prompt.
6.5.1 Power management At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while. Backlight always on You can choose to have the lights always on. Smart powersave You can also initiate this special feature of MioMap. When running on battery Smart Powersave will light up the screen only when you press or tap a button, or if MioMap has something to show you.
7 Troubleshooting guide Thank you again for purchasing our product. We hope you will enjoy every minute of using it. However you may face difficulties before you get really accustomed to MioMap. In such cases, please, refer to this table of frequently encountered problematic situations. I cannot find the Greenarrow that would show my location. Navigation does not start. Check the GPS status icon on any of the map screens (Page 24) or the GPS Data screen (Page 29).
The ‘Route To’ button is for starting a new route only. For a single route you tap this when the destination is selected. Multi-point routes can be created after you have established a single route. Add points to the single route by using the ‘Add Via’ and ‘Continue’ buttons. Applying ‘Route To’ again will delete the whole route. In your case only single routes existed before, so they were deleted without a warning message.
8 Glossary The manual may contain many technical terms. Please look below for an explanation if you are unfamiliar with some of them. 2D/3D GPS reception: The GPS receiver uses satellite signals to calculate its (your) position. Depending on the current positions of the ever moving satellites in the sky, and the objects in your environment, the signal that your GPS device receives may be weaker or stronger.
Automatic day/night colours: Based on the time and position given by the GPS device, MioMap is able to calculate when the sun rises and sets at your current location on this particular day. Using that information MioMap can change between the day and the night colour schemes a few minutes before sunrise and a few minutes after sunset (Page 64).
Lock button appears on the screen. Tapping it will re-enable Lock-to-Position. See also Page 22. Map Orientation:MioMap is able to rotate the map for your convenience. If you choose Track-up mode, the map will be rotated to look in the direction of your heading. Selecting North-up, the map remains oriented to have North toward the top. Use the left and right hardware buttons to turn your map in the direction you wish. This will immediately turn off the automatic rotation.
Zoom In and Out: The Zoom function is used to change the scale of the map. Use Zoom In to scale down the map to see less of it but in more detail, and use Zoom Out to scale the map up to have a broader view of that part of the map with fewer details. See also Page 15 and Page 21.