User manual

6.1.6.1 Audible Warning

You can disable the audible warning; have a simple warning (when you are warned

only if you exceed the speed limit when approaching a camera); or a complex sound

with repeated beeps as you approach the camera. In case of section control

cameras, you will also hear these beeps while you are between the two cameras

(these cameras work in pairs).

You are warned well in advance. The distance Mio Map starts warning you before

reaching the camera depends on your speed. The higher the speed, the earlier the

warning starts.

6.1.6.2 Visible Warning

Besides this, Mio Map can pop up a visual warning with only the symbol of the

camera above the speed limit sign on the Cockpit screen, or you can ask for details.

For fixed, mobile and built-in cameras you will see the speed limit checked by the

camera, and the remaining distance to reach the area monitored by the camera.

With section control cameras you see the same while approaching the first camera,

then instead of the distance your average speed is displayed until you reach the

second camera.

6.1.7 Set Favourite Destinations

You can select two of your most frequent destinations to be your favourites (5.3.5).

You can start navigating to either of them by only two taps on the screen. The

original names of these points are Home and Work.

You can rename them and specify their locations. To determine the location you can

use the same Find menu options (5.3) as for a route destination, and depending on

that choice and the information available, the location will be shown here as a street

address, a latitude/longitude position, or both.