User’s Manual
R00 (USA) Trademarks The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and manuals are subject to change without notice. Mio Technology assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the manuals.
Table of Contents Precautions and Notices ......................................................................vii 1 Getting Started..................................................................................1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2 Video ................................................................................................15 2.1 2.2 2.3 2.4 3 Understanding Hardware Components................................................ 1 Front Components .................................
3.4 3.5 3.6 3.7 3.8 4 Pictures............................................................................................31 4.1 4.2 4.3 4.4 4.5 4.6 5 5.3 5.4 About Bluetooth Profiles..................................................................... 35 Connecting a Bluetooth Mobile Phone............................................... 36 Connecting a Mobile Phone for the First Time................................... 36 Connecting a Different Mobile Phone .............................................
Editing a Contact ................................................................................ 55 Deleting a Contact.............................................................................. 55 7 Calculator ........................................................................................57 7.1 7.2 7.3 7.4 8 File Manager....................................................................................65 8.1 8.2 8.3 9 Starting and Exiting Calculator......................................
11.3 User Interface..................................................................................... 90 11.4 Four Steps to Create a Video File...................................................... 91 Step 1: Determine Video Output Setting............................................ 91 Step 2: Add/Edit Media Clip ............................................................... 91 Step 3: Choose Style ......................................................................... 92 Step 4: Create Video File ...
Bluetooth .......................................................................................... 115 14.2 Safety Precautions ........................................................................... 115 About Charging ................................................................................ 115 About the AC Adapter ...................................................................... 115 About the Battery .............................................................................
Precautions and Notices For your own safety, do not operate the controls of the product while driving. Use this product prudently. The product is intended for use solely as a navigation aid. It is not for precise measurement of direction, distance, location or topography. The calculated route is for reference only. It is the user’s responsibility to follow the traffic signs and local regulations along the roads.
A car holder is needed when using the device in a car. Be sure that you place the device in an appropriate place, so as not to obstruct the driver’s view, or deployment of airbags. Do not mount where the driver’s field of vision is blocked. Do not mount in front of airbag panels. viii Do not place unsecured on the dashboard. Do not mount in front of an airbag field of deployment.
1 Getting Started 1.1 Understanding Hardware Components NOTE: Depending upon the specific model purchased, the color of your device may not exactly match the device shown in this manual. Front Components Ref Component Touch Screen Bluetooth Indicator Charge Indicator Microphone Description Displays the output of your device. Tap the screen with your fingertip to select menu commands or enter information. Flashes in blue to indicate that Bluetooth is on.
Back Components Ref Component Description External GPS Antenna Connector This connector (under rubber dust cover) allows use of an optional external GPS antenna with magnetic mount, which may be positioned on top of the car for better signal reception in areas with poor reception. Speaker Sends out music, sounds and voice.
Ref Component SD/MMC Slot Headphone Connector Description Accepts a SD (Secure Digital) or MMC (MultiMediaCard) card for accessing data such as MP3 music. Connects to stereo headphones. Top Components Ref Component Power Button Description Turns on and off the device. (Pressing briefly or for a long duration makes a difference. See Sections 1.6 and 13.1 for information.) Bottom Components Ref Component Description Mini-USB Connector Connects to the charger or USB cable.
1.2 Performing the Initial Start Up 1. For the initial start up, press the power button for 5 seconds to turn on your device. NOTE: For normal operation, briefly press the power button to turn on and off your device. 2. Your device turns on. Immediately charge your device as described in the next section. 3. The “Switch Language” screen appears. Tap the arrow button to select the button. desired language. Then, tap the 4. The “Date/Time” screen appears. Tap the appropriate arrow button to select button.
5. The Home screen appears. You can now use your device.
1.3 Connecting to AC Power and Charging the Battery When charging the battery for the very first time, you should charge it for at least 8 hours. 1. Slide and click the connector converter onto the AC adapter. 2. Connect the adapter cable to the bottom of your device. 3. Plug the AC adapter into a wall outlet. 4. The charge indicator glows amber when charging is in progress. Do not disconnect your device from AC power until the battery is fully charged, the charge indicator will turn green.
1.4 Charging the Battery via the USB Cable 1. Turn on the computer. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3. If your device is on, the screen as shown below appears. Whenever your device is connected to a computer, you will not be able to use it. NOTE: When the device is connected to a computer, it is recognized as an external mass storage device. Do not delete any files pre-installed in the device.
1.5 Using Your Device in a Vehicle CAUTION: Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. Make sure that the GPS antenna has a clear view of the sky. If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the vehicle through a window. When closing the window, be careful not to pinch the antenna cable.
1.6 Operating Basics Turning On and Off For normal operation, turn off the device by briefly pressing the power button. The device enters a suspended state. When you next briefly press the power button, the system resumes. You will either be back to where you left off or see the Home screen. NOTE: The screen you see after resuming depends on the program you were using when you suspended the device.
Tap Touch the screen once with your fingertip to open items or select onscreen buttons or options. Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. Tap and hold Tap and hold your fingertip until an action is complete, or a result or menu is shown. Home Screen The first time you initialize your device, the Home screen appears. The Home screen is your starting place for various tasks. Tap a button to start a program or open another menu.
Tools Settings Contacts keeps a list of names, addresses, and phone numbers. Calculator provides basic arithmetic, currency conversion, and measure conversion functions. File Manager transfers multimedia files between a storage card and the device’s flash memory. Customizes the system settings. Chapter 6 Chapter 7 Chapter 8 Chapter 9 Using the Soft Keyboard There are occasions when you input text or numbers to your device.
Number/symbol Keypad Switch to the alphabet keypad. to enable umlaut, you can tap a vowel letter repeatedly to When you tap input a different form of the letter. Alternatively, you can tap the letter in the pop-up window as shown below. Umlaut enabled. Tap the button again to disable it. After you complete an input, tap 12 .
1.7 Inserting a SD/MMC Card Your device has a SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. It supports up to 2GB storage card. To use a SD/MMC card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device. To remove a card, first make sure that no application is accessing the card, then slightly push the top edge of the card to release it and pull it out of the slot.
2 Video 2.1 Starting and Exiting Videos CAUTION: DO NOT view videos while driving. It may be illegal in your state for a display showing a video to be in view of the driver. Movie allows you to watch the video clips on your device. (See later section for the formats that your device supports.) Tap Videos to start the program.
To exit the program, tap . 2.2 Preparing the Video Files for Your Device Before using the program, have the files ready on either your device’s My Flash Disk\ My Videos folder or on a storage card. Note that your device only supports video files in the following formats: Formats MP4 (.mp4) MP4 (.mp4) MP4 (.mp4) MP4 (.mp4) QuickTime Movie (.mov) QuickTime Movie (.mov) AVI (.avi) AVI (.avi) 3GP(.3gp) 3GP(.3gp) 3GP(.3gp) 3GP(.3gp) ASF(.asf) WMV (.wmv) Video Codec MPEG4 H.263 MPEG4 H.263 MPEG4 H.
2.3 Playing Video Clips 1. If your files are in a storage card, insert the card into your device. 2. Tap Videos to start the program. 3. The program will search the matching files in the specific folder on your device and in all folders on a storage card. It then displays the video file list. The change of color indicates the file is selected. Indicate the format of the video file. Exit Selected file/ Total number of files. Play the selected file. Delete the selected file.
2.4 Video Playback Controls During the playback, tap anywhere on the screen to open or close the onscreen control buttons. When the control buttons are closed, the video shows in full screen. Back You can tap on a point along the track bar to move directly to a different location for the playback. Control Button Name Description Play/Pause Play or pause the playback. Stop Stop the playback. Fast Forward Fast forward the video. Tap the button to switch to the next option.
Control Button Name Volume / Exit Description Increase or decrease the volume. The indicator at the bottom shows the current volume level. Stop the video playback and return to the video list screen.
3 Audio 3.1 Starting and Exiting Audio Audio features: Playback of MP3/WAV/WMA files Basic playback controls such as play, pause, stop, next and previous Playback includes single selection playback, repeat, single repeat, sampling playback, normal sequence and random sequence. 11 preset equalizer audio profiles Play list support Background playback Lyrics display Tap Audio on the Home screen to start the program.
The control panel appears on the screen where you can easily control the player by tapping the control buttons. To exit the program, tap . 3.2 Preparing the Audio Files for Your Device Before using the program, have the files (.mp3, .wav, or .wma) ready on either your device’s My Flash Disk\My Audio folder or on a storage card. A tool called MioTransfer is supplied for you to easily copy the files from your computer to the correct location. (See section 10.3 for information.) 3.3 Playing Audio Files 1.
The information area displays the current status including the play/pause/stop status, the elapsed time, the power status, the playback mode, the volume level, and the properties of the current song such as the artist (if available with the file), filename, total length, and stereo/mono information. NOTE: During the playback, the screen backlight will automatically shut off if you haven’t tapped the screen within the preset time (30 seconds by default).
Control Button Name Playback Mode Description Switches to the next mode: Repeated playback of the current file. Repeated playback of all files in the current play list in sequence. Playback of all files in the current play list in random order. Sampling (10 seconds) playback of all files in the current play list in random order. Playback of all files in the current play list in sequence. Lyrics Minimize Play List Opens the play list. (See section 2.6 for more information.
3.5 Displaying Lyrics The program allows you to display the real-time lyrics on the screen while playing songs. This feature is especially handy for you to sing along with the songs. Preparing the Lyrics Files for your Device To display the lyrics, you need to have the lyrics files (.lrc) ready on your device’s \My Flash Disk\My Audio\Lyric\ folder or the \My Audio\Lyric\ folder on your storage card. NOTE: You can search and download these .lrc files from the Internet.
To close the lyrics screen and go back to the control panel, tap anywhere on the screen. 3.6 Using the Play Lists You can create your own play lists for future use. Creating a Play List 1. Tap on the control panel to open the play list screen. The screen shows the current play list. Back Play the selected file. Save the play list. Add song Remove the selected song from the list or from the storage media. 2. To add a song to the play list, tap Open the list of play lists.
Back Add the selected song(s) to the play list. 4. To save the play list, tap Add all songs to the play list. . 5. The keyboard screen appears where you can change the default name of the when finished. play list. Rename the play list if you want. Tap 6. To return to the control panel, tap . Opening a Play List To open one of the play lists that you have created: 1. Tap 2. Tap on the control panel. to display all the play lists you have created.
3. Tap the play list you want to open and tap . Back Rename the selected play list. Open the selected play list. Delete the selected play list. 4. To return to the control panel, tap Delete all play lists. . 3.7 Equalizer The program provides 11 preset audio profiles. Tap panel. to open the equalizer Tap or to cycle through the available options: Default, Rock, Pop, Jazz, Classical, Dance, Heavy, Disco, Soft, 3D and Hall.
Tap to save your selection and return to the control panel. To select the Default profile, tap . 3.8 Settings Tap on the control panel. The Settings screen appears. Help NOTE: To know the function of each button, you can tap . Then tap the button on the list to display a description line on the right side of the screen. Tap the check box (√) to turn on the power saving mode. Tap the up/down button to set the timer to 10 seconds, 30 seconds, 1 minute, or 5 minutes.
4 Pictures 4.1 Starting and Exiting Pictures Pictures allows you to view pictures in JPG, JPEG, and BMP formats and view the slideshow of the pictures on your device. Tap Pictures on the Home screen o start the program. To exit the program, tap . 4.2 Preparing the Pictures for Your Device Before using the program, have the files (.jpg, .jpeg, or .bmp) ready on either your device’s My Flash Disk\My Pictures folder or on a storage card.
4.3 Viewing Pictures in Thumbnail View 1. If your files are in a storage card, insert the card into your device. 2. Tap Pictures on the Home screen o start the program. 3. The program will search the matching files in the specific folder on your device and in all folders on a storage card. It then displays the pictures in the thumbnail view. You can press the Up or Down arrow button to go to next or previous page. Up A frame indicates the picture is selected.
To go back to the thumbnail view, tap anywhere on the screen to display the control buttons and then tap . 4.5 On-Screen Control Buttons On-screen control buttons provide various functions and settings. Tap anywhere on the picture to display the buttons as shown below. To close the buttons, tap the picture again. Control Button Name Description Slideshow Starts the slideshow. (See Section 3.6 for detailed information.
Zoom Tap the button to zoom in to 1.2x, 1.5x, 1.8x, or 2.0x, or, after zooming in, to zoom out. When you have zoomed in the picture, you can drag the picture to view other parts of the picture. Back Goes back to the thumbnail view. 4.6 Viewing the Slideshow To view the slideshow of all your pictures, use one of the following ways: When in the thumbnail view, tap to start the slideshow. When in full screen, tap anywhere on the picture to display the on-screen control buttons.
5 Bluetooth 5.1 About Bluetooth Profiles Your device incorporates Bluetooth wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters (30 feet) without requiring a physical connection. Your device supports Bluetooth profiles as below: Hands-free Profile (HFP) Allows your device to serve as a hands-free device for a Bluetooth mobile phone.
5.2 Connecting a Bluetooth Mobile Phone Connecting a Mobile Phone for the First Time NOTE: This chapter tells you how to initiate the Bluetooth connection from your device. If you want to initiate the Bluetooth connection from a Bluetooth mobile phone, make sure that your device is in discoverable mode. (See Section 8.8 for information.) 1. Make sure that the Bluetooth mobile phone is in discoverable mode. 2. Tap Mobile Phone on the Home screen. 3.
5. Tap the soft keyboard to enter the passkey (within 16 characters). 6. Enter the same passkey on your Bluetooth mobile phone so that the connection can be established. Depending on the mobile phone model, you may need to select the hands-free service to complete the connection. 7. When the connection is completed, a message will appear on the screen. Tap Yes. 8. The shortcut menu appears with the name of the connected device on top of the screen. A check mark indicates that the device is connected.
9. In the Mobile Phone main menu, you can place phone calls by tapping buttons on the screen. (See Section 5.3 for information.) 10. You can tap Back to minimize the screen and use other functions of the device.
Connecting a Different Mobile Phone To connect a mobile phone that is not already in the shortcut list: 1. If you are in the Mobile Phone main menu, tap Connect to Phone. 2. In the shortcut menu, tap Find Others. Using the Mobile Phone Shortcut Once a Bluetooth connection has been established, the shortcut will be saved. When you next tap the Mobile Phone button on the Home screen, the program will try to connect the last paired mobile phone.
Delete the selected shortcut. NOTE: All shortcuts will be cleared if you shut down the device. The program can save up to 15 shortcuts. A 16th shortcut will replace the oldest one. Disconnecting the Mobile Phone Tap the connected device in the shortcut menu and tap Disconnect when the message appears asking you to select your operation. 5.3 Phone Operations Placing a Call After pairing with a mobile phone (as described in Section 5.
Dial By tapping the Dial button in the Mobile Phone main menu, you can enter the telephone number with the onscreen keypad. After entering the telephone number, tap to place the call. NOTE: International calls require a country code to be included in the phone number. On your device, the country code is separated from the rest of the number sequence by a plus (+) sign. If you are making an international call, tap and hold the 0 key until the + sign appears.
NOTE: When a mobile phone different from the previous one is connected, a message will appear asking if you want to replace the previous remote phone book with the current remote phone book. If you need to refresh the remote phone book, tap Get Phone Number to download the phonebook from the mobile phone again. This icon indicates a contact from the mobile phone’s phone book.
Save the selected phone number to the Contacts program. By default, the list shows the incoming, outgoing, and missed calls. You can filter the calls by tapping Options. NOTE: To clear the call history, use Bluetooth settings as described in Section 8.8. Receiving a Call After pairing with a mobile phone (as described in Section 5.2), your device will ring and display the incoming call screen when there is an incoming call.
Operations during a Call During a phone call: If you need to input other numbers, such as an extension number, tap Keyboard to open the keypad and tap the digits. Tap Mute to mute your sound so that the other party cannot hear you. To end the mute mode, tap the button again. Tap to end the call. Tap Voice to Phone to switch the call to your mobile phone. To transfer back, tap the button again. Tap Minimize to minimize the screen and to back to the previous screen.
5.4 Connecting a Bluetooth Headset Connecting a Headset for the First Time 1. Make sure that the headset to connect is a stereo Bluetooth headset. 2. Tap Stereo on the Home screen. 3. The program will search for nearby Bluetooth headsets if this is the first time you try to connect a headset. NOTE: If no device is detected, the screen shows the shortcut menu. (See the shortcut descriptions later in this section.) 4. The search result will show on the screen. Tap the headset you want to connect.
5. Tap the soft keyboard to enter the passkey. (Check the headset manual for the passkey.) 6. When the connection is completed, a message will appear on the screen. Tap Yes. 7. The shortcut menu appears with the name of the connected device on top of the screen. A check mark indicates that the device is connected.
8. You can tap Back to go back to the Home screen. Connecting a Different Headset To connect a headset that is not already in the shortcut list, tap Find Others in the shortcut menu. Using the Headset Shortcut Once a Bluetooth connection has been established, the shortcut will be saved. When you next tap the Connect to Headset button on the Home screen, the program will try to connect the last paired headset. You can also tap a particular shortcut button to connect the particular headset.
6 Contacts 6.1 Starting and Exiting Contacts Contacts allows you to keep a list of names, addresses, and phone numbers. NOTE: If you have created Microsoft Outlook Contacts information on your computer, you can copy the information to your device. (See Section 10.4 for information.) Tap Tools on the Home screen and then tap Contacts to start the program. ↓ The contacts list appears.
To exit the program, tap . 6.2 Using the Contacts List After starting Contacts, the contacts list appears. It shows the names and phone numbers (mobile phone numbers by default) of your contacts. You can use the various buttons on the screen to search a contact, navigate to the address of a contact, call a contact, and so on. Tap one of the alphabet sets to quickly find a contact. Tap twice to display the summary screen of a contact. Exit Navigate to the address of the selected contact.
6.3 Using the Summary Screen In the contact list, tapping a contact twice displays the summary screen of the contact. Tap to scroll through the entry fields. Back 6.4 Navigating to a Contact’s Address You can set a contact’s address as your GPS navigation destination. 1. Tap the Contacts button on the Home screen to start the program. 2. In the contact list, select the desired contact and tap 3. Tap to select the home address or . to select the work address.
4. The navigation program starts. (See the document supplied with the navigation software for more information.) 6.5 Making a Phone Call to a Contact 1. Connect your device with a Bluetooth mobile phone as described in Section 5.2. 2. Tap the Contacts button on the Home screen to start the program. 3. In the contact list, select the desired contact and tap . NOTE: The call button is available for use only when a Bluetooth mobile phone is connected. 4. Tap to call the home number, mobile phone number.
6.6 Managing Contacts Adding a Contact 1. Tap the Contacts button on the Home screen to start the program. 2. Tap . 3. Tap an entry field twice. Or, tap a field and then tap appears. .
4. Use the soft keyboard to enter the information in the field and tap . 5. Enter the information in other fields such as address and phone number fields. You will need to scroll down to see all available fields. NOTE: When entering the address, the soft keyboard guides you through different parts of the address including street, city, state, post, and country. After entering a part, tap to proceed to the next part.
6. Tap save the contact’s information and return to the contact list. Editing a Contact To modify a contact’s information: 1. In the contact list, tap the contact twice to open the summary screen. - or In the contact list, tap the contact and then tap . 2. Tap twice the field you want to edit and use the soft keyboard to edit. If you want to clear a field, tap the field and then tap . 3. Tap to save the changes. Deleting a Contact In the contact list, select the contact you want to delete and tap .
7 Calculator 7.1 Starting and Exiting Calculator Calculator provides three modes: Calculator, Currency, and Conversion. You can use these modes to perform basic arithmetic, currency conversion, and measure conversion functions. Tap Tools on the Home screen and then tap Calculator to start the program. ↓ You will see the calculator screen. To switch to another mode, tap one of the buttons at the top right corner of the screen.
Switch to Calculator mode. Switch to Currency mode. Switch to Conversion mode. Exit To exit the program, tap . 7.2 Using the Calculator Mode The Calculator mode allows you to perform any of the standard operations for which you would normally use a handheld calculator. If you are currently not in the Calculator mode, tap the button. Tap the numeric keypad to enter numbers and mathematical symbols. Then tap button to generate the result.
Calculator Memory Memory indicator Memory buttons Button Name Memory Cancel Description Clears the value in memory. Memory Recall Shows the value in memory. Memory Plus Adds the current value to the value in memory. Memory Minus Subtracts the current value from the value in memory. 7.3 Using the Currency Mode Use the Currency mode to perform the currency conversion. You can also edit the exchange rate. 1. Start the Calculator program as described in Section 7.1. 2.
3. Tap the down arrow next to the input field to display a list of currencies and select the currency to convert from. When a currency is selected, the abbreviation of the currency will be displayed on the upper left corner of the input field. Input field Currency indicator Currency scroll list Tap to go to the editing screen. Scroll bar 4. Tap the down arrow next to the output field to display a list of currencies and select the currency to convert to.
Output field Currency indicator Currency scroll list Scroll bar 5. Enter the currency value in the input field by tapping the number buttons on the numeric keypad. You can also perform basic arithmetic in the input field. The converted currency immediately appears in the output field. Input value Output value NOTE: The program uses the default exchange rates unless you change them. (See the sub-section below for information.
4. Enter the exchange rate and tap to the previous screen. to save the changes and go back 7.4 Using the Conversion Mode The Conversion mode allows you to convert measures from one unit to another. 1. Start the Calculator program as described in Section 7.1. 2. Tap to switch to the Conversion mode. 3. Tap the measure button to display a scroll list of measures. Select the desired measure from the list.
4. Tap the down arrow next to the input field to display a list of units and select the unit to convert from. When a unit is selected, the abbreviation of the unit will be displayed on the upper left corner of the input field. Input field Unit indicator Unit scroll list 5. Tap the down arrow next to the output field to display a list of units and select the unit to convert to. When a unit is selected, the abbreviation of the unit will be displayed on the upper left corner of the output field.
Output field Unit indicator Unit scroll list 6. Enter the value in the input field by tapping the number buttons on the numeric keypad. You can also perform basic arithmetic in the input field. The converted value immediately appears in the output field.
8 File Manager 8.1 Starting and Exiting File Manager File Manager allows you to transfer multimedia files between your device and a storage card. Tap Tools on the Home screen and then tap File Manager to start the program.
The File Manager screen shows specific folders of your device in the left column and the folder(s)/file(s) of the storage card, if inserted, in the right column. NOTE: The left column shows only “specific” folders in the My Flash Disk of your device. “Specific” folders refer to pre-defined data folders for multimedia programs (such as My Audio folder for the Audio program). Other folders are not accessible within the File Manager program. To exit the program, tap . 8.
3. To select the target folder, tap twice the folder in the left column to open it. Or, tap the folder and then tap to open the folder. 4. If the source file is in a folder of the storage card, tap twice the folder in the right column to open the folder. Or, tap the folder and then tap the folder. to open . If you want to select all folders, tap 5. Select your source file by tapping it in the right column. If you want to select all files, tap .
NOTE: To go up one level, tap 6. Tap . to copy the selected file to the target folder. From Your Device to the Storage Card Use the same method as described in the previous sub-section to copy files from your device to the storage card except that the direction is from the left column to ( ) the right column. 8.3 Managing Folders and Files In addition to copying files, File Manager provides the below functions: Rename Changes the name of the selected folder/file.
9 Settings 9.1 Starting and Exiting Settings You can customize the system settings such as backlight brightness, volume, and language. Once you change the settings, the new settings will remain until you change them again. Tap the Settings button on the Home screen. The Settings menu appears as shown below.
To exit Settings, tap . The following sections describe the various buttons and their functions. 9.2 Backlight 1. Tap the Settings button on the Home screen. 2. Tap the Backlight button. 3. Move the knob along the track bar to adjust the brightness of the backlight. To darken the backlight, move the knob to the left. To lighten the backlight, move the knob to the right. 4. Tap 70 to save the changes.
9.3 Volume 1. Tap the Settings button on the Home screen. 2. Tap the Volume button. 3. Move the knob along the track bar to adjust the volume. To decrease the volume, move the knob to the left. To increase the volume, move the knob to the right. 4. Tap save the changes.
9.4 Screen You can calibrate the touch screen if it is not responding accurately to your taps. 1. Tap the Settings button on the Home screen. 2. Tap the Screen button. 3. Tap to start the calibration. 4. Tap and hold the centre of the target.
5. When the target moves to another position, tap and hold the centre of the new target. Repeat each time to complete the calibration process. 6. When completed, tap . 9.5 Power To check the remaining power level of your battery and/or set up the power saving feature: 1. Tap the Settings button on the Home screen. 2. Tap the Power button. 3. The screen shows the remaining power of your battery. You can set a timer to automatically turn off your device when it is idle for a set period of time.
4. Tap to save the changes. 9.6 Date/Time 1. Tap the Settings button on the Home screen. 2. Tap the Date/Time button. 3. To change the time zone, tap the arrow in the “Time Zone” item.
4. To change the date, tap the down arrow in the “Date” item. A calendar pops up. Tap the left arrow on the calendar to go to the earlier month and year or the right arrow to the later month and year. Alternatively, you can tap the month or year on top of the calendar to directly change the month or year. When the calendar shows the current month, tap the date on the calendar. 5.
9.7 Language 1. Tap the Settings button on the Home screen. 2. Tap the Language button. 3. Tap the up/down arrow button to select the desired language. 4. Tap 5. Tap the 76 to save the changes. button for the new setting to take effect.
9.8 Bluetooth 6. Tap the Settings button on the Home screen. 7. Tap the Bluetooth button. 8. The “Bluetooth Settings” screen contains 3 buttons as described below. 9. After you complete your settings in a screen, tap Done. 10. Tap Back to go back to the Settings screen.
BT Preferences The setting items in the “BT preferences” screen are: Name Tap twice this field if you want to rename the Bluetooth device name. A soft keyboard appears for you to enter the new name. Enable Bluetooth The Bluetooth radio is on when this item is checked. Uncheck this item if you want to turn off the Bluetooth radio. Discoverable Bluetooth Check this item to make your device discoverable for other Bluetooth devices. You can check this item only if the previous item is enabled.
You can specify how soon your device automatically answers an incoming call. If you want to manually answer a call, select Never. Delete Preferences Whenever you want to delete particular data as listed below, check the corresponding item(s) in the “Delete preferences” screen. Phonebook (phone number) Empty call history A message will appear on the screen asking if you want to permanently delete the data. Tap OK. 9.9 Restore To restore the settings to factory default values: 1.
3. Tap 80 .
10 MioTransfer 10.1 Installing MioTransfer MioTransfer allows you to easily transfer data such as MP3 and photos between your device and a computer. To install MioTransfer to your computer: 1. Turn on your computer and insert the supplied CD/DVD into the CD/DVD-ROM drive of your computer. 2. When the language selecting screen appears, click the language that you wish to install from. 3. Click Install MioTransfer.
4. Click Next. Follow the onscreen instructions to complete the installation. NOTE: If MioTransfer has already been installed on your computer, clicking Install MioTransfer will remove the application from your system. 10.2 Starting and Exiting MioTransfer Click MioTransfer icon on the Windows Desktop to start the program. The MioTransfer screen appears. It provides the following tools: Audio Allows you to transfer the audio files between your device and your computer. (See Section 10.3 for details.
Contacts Allows you to copy the Microsoft Outlook Contacts information from your computer to your device. (See Section 10.4 for details.) Mio Online Provides link to the Mio website. To exit MioTransfer, click Exit at the bottom right corner of the screen. CAUTION: Before disconnecting the cable, you must click the device icon in the task bar and click “Safely remove xxx” (where xxx is the name of your device).
5. Select the type of file to copy: To copy audio files, click Audio on the top menu bar. To copy video files, click Videos on the top menu bar. To copy photos or pictures, click Pictures on the top menu bar. The left column shows the drives of your computer and the right column shows the files in the appropriate folder of the target device (either or ). Target Device 6. Select your target device by clicking one of the icons: - the flash memory of your device - a storage card inserted into your device.
progress of file transfer and the selected file will be copied to the target device. NOTE: You can also copy files from your device to your computer. First select the file you want to copy from the right column and select a folder on the left column to place these files. Then click to start the file transfer. Managing Files Various buttons are available for you to manage the files: Rename Changes the name of the selected file. Delete Removes the selected file.
10.4 Copying Contacts Information to Your Device You can copy the Microsoft Outlook Contacts information from your computer to your device using MioTransfer. This saves you the time for entering the information all over again on your device or on your computer. (For information on Contacts, see Chapter 6.) 1. Turn on your computer and your device. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3.
87
11 Video ToolBox 11.1 About Video ToolBox Video ToolBox allows you to import media in a variety of sources and save it in a specific file format so you can watch the video on your device. You can also use the editing tools such as trimming the clip and adding special effects to create a customized project. 11.2 Installing Video ToolBox 1. Turn on your computer and insert the Application CD/DVD into the CD/DVD-ROM drive of your computer. 2.
11.3 User Interface Ref Name File menu Options Panel Step buttons Media Clip List Description Select to open a menu where you can save your project file and set project preferences. Displays controls, buttons, and other information that you can use to customize the project. The contents of this panel change depending on the step you are in and the selected project element. Click to go to the next or previous step. Displays the clips, transition effects and text that are used in the project.
Navigation Panel Displays buttons for playback and trimming clips. 11.4 Four Steps to Create a Video File Step 1: Determine Video Output Setting 1. On Windows desktop, click Start Video ToolBox 2.0 Home Edition. Programs Video ToolBox 2.0 Home Edition 2. On the first screen, click Enter. Step 2: Add/Edit Media Clip 3. Click one of the Add Media buttons depending on your media source. (For detailed information, see sections 11.5 to 11.7.) To add a video file, click To add an image file, click . .
To add video from an analog source (e.g. TV tuner card), click . 4. Click Next to continue. Step 3: Choose Style 5. If you want, you can choose a movie style from the available themes and edit movie style elements. If you do not want to apply a style for your project, select the default white theme. (See Section 11.8 for details.
6. Click Next to continue. Step 4: Create Video File 7. Click Create to save your video file in the selected output video format. 8. In the dialog box, enter the filename and click Save.
11.5 Adding Media Clips Inserting Clips into Your Project Insert video, image and DVD/DVD-VR video into the project’s Media Clip List. To insert a clip, just click an Add Media button and in the dialog box that opens, locate the file and click Open/OK. NOTE: Video ToolBox can only import DVD videos from non-copy-protected DVD discs or folders. Capturing Digital Video Video ToolBox lets you capture video from DV devices such as DV camcorders.
Capturing Analog Video When footage is captured from analog sources such as VHS, Video¬8, or TV, it is converted to a digital format that can be read and stored by the computer. Video ToolBox automatically saves the captured video in the DV AVI format. To capture analog video: 1. Click (Capture Analog Video). 2. Click (Toggle Display). 3. Specify a Capture folder in which to save video files. 4. Click Capture Video to start capturing. Click Stop Capture or press the Esc key to stop capturing. 5.
11.6 Editing Video Clips Editing tools Media Clip List When video clip(s) are added, the editing tools include: Multi-trim Video Allows you to choose desired segments from a video file and extract them. Split Video Cuts the selected clip into two. Auto-enhance Select to automatically adjust the hue, saturation, brightness and the contrast of the clip.
Trimming a Clip To split a video clip: 1. Select the clip you want to split on the Media Clip List. 2. Drag the Jog Bar to the point where you want to cut the clip. 3. Click Split Video to cut the clip into two clips. To remove one of these clips, select the unwanted clip and click . To trim a video clip with the Trim Bar: 1. Select the clip you want to split on the Media Clip List. 2. Click and drag the Trim handles on the Trim Bar to set the Mark-in/Mark-out points on the clip.
3. Drag the Jog Bar to the point in the clip that you want to set as the start/end of the clip then click (Mark-in/Mark-out). Trimming a Video into Multiple Clips 1. Click Multi-trim Video on the Options Panel. 2. In the Multi-trim Video dialog box, view the whole clip first by clicking to determine how you want to mark segments. If you want to mark segments to retain, click Selection Mode then select Retain selection.
4. Repeat step 3 as required until you have marked all the segments you want kept or removed. 5. Click OK when finished. The video segments that you kept are then inserted onto the Media Clip List. Multi-Trim Video Control Control Button / Description Reverses or advances through the video in fixed increments. By default, these buttons move up or down through the video in increments of 25 seconds. To change this, tap the up or down arrow to adjust the value. Click and hold to open the speed bar.
11.7 Creating an Image Slideshow You can create a video slideshow using your images. To create, click (Insert Image) and, in the dialog box, select the images (press Ctrl or Shift to select multiple files) you want to include in the slideshow and click Open. The duration of each image can be set in the Preferences dialog box. Editing tools Media Clip List Use the rotate buttons to change the orientation of the selected image.
11.8 Choosing a Style A style refers to a set of attributes including beginning/ending clips, transition effects, and background music. Select a style. Style elements are added to the Media Clip List. Select background music. Selecting a Movie Style In the Options Panel, click the style you want to use. A beginning clip and an ending clip in the selected style will be added to your project.
Changing the Transition Effect With multiple video clips or image files in the Media Clip List, default transition effects are applied to the project according to the style selected. To change the transition effect 1. In the Media Clip List, click the transition effect you want to change. 2. In the Options Panel, select a transition effect from the drop-down menu. NOTE: You can click Delete All to remove all transition effects in the Media Clip List. Editing Text 3.
5. Adjust the text attributes using the settings in the Options Panel. Font face Select your desired font style. Font size Set your desired font size. Vertical text Makes the orientation of the title vertical. Font style Set the text as bold, italic and/or underlined. Alignment Aligns horizontal text to the left, center, or right. Or, aligns vertical text to the top, center, or bottom. Color Specify your preferred font color. Shadow Select to add a shadow to the text.
12 POI Loader 12.1 Installing POI Loader With POI Loader, you can import a list of favorite locations from your computer to your device. The locations will be added to the My POI category of the POI function of MioMap. (See MioMap manual for information on POIs.) 1. Turn on your computer and insert the supplied CD/DVD into the CD/DVD-ROM drive of your computer. 2. When the language selecting screen appears, click the language that you wish to install from. 3. Click Install POI Loader.
4. Click Next. Follow the onscreen instructions to complete the installation. 12.2 Preparing the Source Files The source files can be .xls or .csv files. The file must contain the following data: Longitude Latitude Name The “Longitude” and “Latitude” fields are numerical values of the WGS84 system. The letter N/S/E/W before the value indicates the hemisphere North/South/East/West.
12.3 Importing POIs NOTE: When importing .xls files, make sure that your computer has Microsoft Excel installed. 1. Have the .xls or .csv files ready on your computer. (See section 12.2 for the file structure.) 2. Insert an SD card to your device. This is where the POIs will be imported. 3. Connect your device to your computer. 4. Click the POI Loader shortcut on the Windows desktop. 5. Click Next. 6.
8. Click Next. CAUTION: Before disconnecting the cable, you must click the device icon in the task bar and click “Safely remove xxx” (where xxx is the name of your device). If you are transferring data, disconnecting the cable without following the correct removal procedure can result in data loss. Using the Imported POIs with Your Device Every time you want to use your POIs, you must insert the SD card before running MioMap. MioMap will load the data from the SD card and refresh the POIs.
13 Troubleshooting and Troubleshooting and Maintenance Maintenance 13.1 Restart and Shut Down Occasionally, you may need to reset your device. For example, you should reset your system when it stops responding; or appears to be “frozen” or “locked up.” Restarting Your Device To restart your device, press the power button for 5 seconds until the “Power Off Selection” screen appears and then tap Restart.
Shutting down puts the device in a deep sleep state. The device will close all running programs before shutting down. To use the device again, press the power button for 5 seconds. The Home screen appears. 13.2 Troubleshooting NOTE: If you encounter a problem you cannot solve, contact an authorized service center for assistance. Power Problems Power does not turn on when using battery power The remaining battery power may be too low to run your device. Charge the battery.
Connection Problems Cable Connection Problems Make sure that your device and your computer are both turned on before trying to establish a connection. Make sure that the cable is securely plugged into the USB port on your computer and on the device. Connect the USB cable directly to your computer—do not run the cable through a USB hub. Reset your device before connecting the cable. Always disconnect your device before you restart your computer.
13.3 Maintaining Your Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device. Keep your device away from excessive moisture and extreme temperatures. Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of your device or drop objects on your device. Do not drop your device or subject it to severe shock.
14 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. 14.1 Regulations Statements Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement This device complies with Part 15 of the FCC Rules.
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Bluetooth Bluetooth QD ID B012565 14.2 Safety Precautions Prolonged listening of music in maximum volume can damage the ears. The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure. About Charging Use only the charger supplied with your device. Use of another type will result in malfunction and/or danger. This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 1.
About the Battery Use a specified battery in the equipment. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or water. Important instructions (for service personnel only) Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
