Operation Manual

4
Knowing your device
❶
Status indicator
• Glows in amber: battery charging.
• Glows in green: battery full.
• Flashes in green: when the
backlight is turned off.
❷
POWER button
Turns your device on and off.
❸
Touch screen
• Displays the output of your device.
• Tap the screen with your finger to
select menu commands or enter
information.
❹
Memory card slot
This function may be reserved.
❺
Micro-USB connector
Connects to the charger or USB cable.
❻
Bike mount socket
For the device mount.
Accessories
Your device comes with the following accessories. To use your device on a bike,
ensure you use the specific bike mount kit that came with your device.
• Power adapter
• USB cable
• Bike mount kit
Note: Depending on the specific model purchased, the colour and look of your device and
accessories may not exactly match the graphics shown in this document.
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged when you
purchase it. You should charge the battery for at least 8 hours before you start
using it for the very first time.
To charge the battery:
• Using a mains power socket
Connect your device to the power adapter by using the USB cable. Plug the
mains power charger into the power socket.
• Via the computer
Connect your device to the computer by using the provided USB cable. For
more information, see "Connecting your device to the computer" in this
section.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.