Operation Manual

Performing the initial start-up

1. Mount the device and accessories on to your bike. For more information, see

the “Installing the device” section.

2. Press and hold the POWER button for 3 seconds to turn your device on.

3. Follow the prompts to personalise your device, including:

• Select your preferred language.

• Set the date and time.

• Set the units format.

• Create your user profile.

Note: You can change these settings while using the device by tapping Main menu >

Settings.

4. Activate the map.

Enter the Startup Key (which is printed on the bottom of the box) and then

tap OK to unlock your device. You will only have to do this the first time you

use the device.

5. Once your device is turned on, it will search for satellite signals

automatically. This may take several seconds depending on the location.

When GPS is fixed, the GPS signal icon ( ) on the screen indicates the

GPS status.

Connecting your device to the computer

1. Turn on the computer.

2. Turn on your device.

3. Connect the Micro-USB end of the USB cable to the back of your device and

the other end to a USB port on your computer.

4. Select the desired connection type from the pop-up message window:

• Connect to PC: Your device will be recognised as two external mass-

storage drives: Mio_system and Mio_data. You can use Windows File

Explorer to copy/move the files from the computer to your device. A USB

Connection screen appears to prevent you from using your device.

DO NOT delete any ﬁles that are pre-installed on the device. Deleting

the ﬁles can cause the device to crash. Mio is not responsible for product

quality caused by ﬁle deletion.

• Charge only: You will be able to continue using your device with the

battery in charging mode via the computer.