User's Manual

16
Information:
GPX (GPS eXchange Format) is a XML data format that allows you to transfer GPS data
(including waypoints, routes, and tracks) between your device and the computer. If
you have downloaded a gpx file from a third party website, you can install this file to
your device. While using your device, the recordings will be saved as the gpx files on the
device. You can also retrieve the recordings from your device to the computer and then
share them on the website.
To transfer gpx files between your device and the computer:
1. Ensure the track you have downloaded from the website is saved as a gpx file on the
computer.
2. Turn on your device and then connect it to the computer. When prompted, select
the Connect to PC option. Once connected, you can find two external mass-storage
drives on the computer: Mio_system and Mio_data.
3. Do one of the following:
• To install the track to your device, copy/paste the gpx file to Mio_data > Dodge >
Tracks.
• To retrieve the recording from your device, copy/paste the gpx file from Mio_data >
Dodge > Tracks > Profile(user folder).
For more information about uploading/downloading tracks, visit: http://mioshare.com
Other navigating options
Going back to start
Note: This feature is only available when the recording is in progress.
The Back to start function enables the device to navigate you back to the
starting point after you have reached the destination or completed your ride.
In the Navigation mode field, you can:
• Select the Bike navigation mode ( ) or Car navigation mode ( ) to
plan your route.
• Select the Fastest mode ( ) to navigate you there in the fastest way
possible, or Backtracking mode ( ) to guide you back the way you came.
Adding a waypoint to your trip
One waypoint is allowed for your trip. Use the Navigate wizard to select a
location as the waypoint (or as the new destination).
Stopping navigation
To stop navigation for your ride, tap on the Navigate screen.