User Manual ₃₀₀/₃₁₀/₅₀₀ series
Welcome Contents Welcome Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Bold — Components or items displayed on screen, including buttons, headings, field names and options. Italics — Indicates the name of a screen.
Other navigating options..................................................................................16 Surprise Me™ Compass.............................................................................................................. 29 Language.............................................................................................................. 29 Keyboard.............................................................................................................. 29 Date & Time............
Cyclo ₃₁₀/₃₁₅/₅₀₀/₅₀₅ Knowing your device Main unit Cyclo ₃₀₀/₃₀₅ 1. Indicates the level of internal battery charge: Green - battery full; Orange - battery charging. 2. 1. 2. POWER button Touch screen Turns your device on/off. • Displays the output of your device. Touch screen • Tap the screen with your finger to select menu commands or enter information. 4. • Tap the screen with your finger to select menu commands or enter information. 4.
Getting started Accessories Your device comes with the following accessories. To use your device on a bike, ensure you use the specific bike mount kit that came with your device. Mio may provide optional accessories for specific models. Please visit Mio website (www.mio.com) for information. Charging the battery Your device has an internal battery that may not be fully charged when you purchase it. You should charge the battery for at least 8 hours before you start using it for the very first time.
4. Activate the map. CAUTION: For optimal performance of the lithium battery, note the following: • Do not charge the battery where the temperature is high (e.g. in direct sunlight). The battery will stop charging when the ambient temperature is less than -10ºC (14ºF) or more than 60ºC (140ºF). • Recharge the battery when it is nearly discharged. When recharging, make sure that the battery is fully charged. Doing so can extend the battery life.
Installing the device Follow the instructions in this section to mount the device and the cadence/ speed sensor kit (for selected models only) on your bike. In addition, you will need to put on the heart rate monitor during your workouts. Mounting the device on your bike The bike mount kit includes two types of rubber pads, allowing you to attach the bike mount to your bike securely. 1. Select the rubber pad that best fits the handle bars on your bike and then attach it using the two plastic straps. 3.
Installing the sensors on your bike 3. When done, you can manually pair the sensor with your device by tapping Main menu > Settings > Sensors > Cadence/Speed. The cadence/speed sensor kit is used for selected models only. Information: 1. Follow the instruction below to install the cadence/speed sensor kit on your bike. c The cadence sensor contains a replaceable CR2032 battery. Follow the instructions below to replace the battery: 1.
Operating basics 2. Adjust the elastic strap so it’s snug while you are putting it on. Ensure that you can take a good deep breath after putting on the strap. 3. Follow the instructions below to wrap the strap around your back, and then secure it on the other side with the buckle. Using the POWER button Note: Putting on the heart rate monitor is like wearing a belt around your lower chest. • Turning on the device Press and hold the POWER button for 3 seconds to turn on your device.
Using the touch screen Main menu To operate your device, touch the screen with your finger. You can perform the following actions: The Main menu is your starting place for various tasks, providing quick access to applications and settings. Tap a button to start a task or open another menu. • Tap Quick touch the screen once to open menus or select onscreen button/option. • Drag While navigating on the map, tap and hold on the screen without releasing your finger to move the map to the desired position.
The System icons NO. Icon Various System icons on the title bar at the top of the screen provide the status information of your device. Depending on your settings, the icons may be different to provide various information of your device. Please note that these icons will not be always displayed during your trip/training. 8 Recording status 9 GPS signal Description : The device is recording your trip/training. : Recording has been paused. The GPS signal icon indicates the GPS status.
Viewing Dashboard screens Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing on the screen. The Keyboard screen can display with various layouts depending on the information you need to enter.
Starting navigation • On the Elevation screen, the device will analyse the route and display it as the elevation plot. Use the buttons upon the plot to zoom in/out and scroll through the plot. : Zoom in the plot : Zoom out the plot Using the Navigate wizard Your device is equipped with maps that provide street-level detail for navigation, including POIs (Point of Interest) such as bike stores, restaurants, points of emergency, and more. The Navigate wizard allows you to search the location easily.
Editing the Home location 4. From the Searching Result screen, you can do one of the following: • Tap GO to start navigating. 1. On the Home Address screen, tap • Tap and then tap Yes when prompted. The location has been added to Favourite. 2. You can change the home location by searching for an address, POI, a location on map or a GPS coordinate. • Tap 3. When done, tap GO to return to the Home Address screen. to display the route to the destination.
Searching for a location from the map screen You can set the destination simply by pointing to it on the map screen. Note: Tap the Sort by button at the bottom of the screen to change the sorting order of the entries: : by time; / : by name Tracks Searching for a location using GPS coordinates Tracks are the recorded routes that give the best experience for cycling provided by other users and official institutes. If there is no track downloaded, you can download tracks from MioShare at: http://mioshare.
In the Navigation mode field, you can: Information: GPX (GPS eXchange Format) is a XML data format that allows you to transfer GPS data (including waypoints, routes, and tracks) between your device and the computer. If you have downloaded a gpx file from a third party website, you can install this file to your device. While using your device, the recordings will be saved as the gpx files on the device. You can also retrieve the recordings from your device to the computer and then share them on the website.
Surprise Me™ Loop The device will generate the routes from your current location and the start/ end point will be the same as your current location. The device features the Surprise Me™ function that will offer you up to three exciting routes around your location. If you’ve already taken a route from the same location, the device will try to propose you different routes, based on the possible and available roads around your current location. This way you will always be offered different routes to choose.
Workout mode POI Cycling is a good aerobic fitness exercise that helps you to burn your calories, lose weight and increase your overall fitness. Workout mode of the device allows you to set workouts by entering your goals (Distance, Time, Calories) or conditions (HR Zone, Power Zone). Favourite When you start a workout, you can monitor the workout status through the Dashboard screens. The device will notify you when you’ve reached your target.
Workout by Time Workout by HR Zone Workout by Time is the perfect tool if you want to set how much time you would like to spend on the workout. Workout by HR Zone is available for selected models only. Connect the heart rate monitor to the device before you start this workout. 1. Tap from the Main menu screen and then select the Time option. 1. Tap 2. Complete the following: from the Main menu screen and then select the HR Zone option. 2.
Viewing the History Indoor training mode Indoor training mode is available for selected models only. Connect the speed & cadence/heart rate/power sensors to the device before you start indoor training. Your device will automatically save the history as the timer starts. Information in History includes date, time, distance, average speed, cadence*, heart rate*, altitude, and more. 1. Create the Indoor profile from Main menu > Settings > Profiles > Create new profile. * For selected models only. ...
Managing data on the device Sharing your experience on the Internet By using MioShare, you can easily share your experiences with other cyclists around the world through the Internet when your device is connected to the computer. For more information, visit: http://mioshare.com/ Using MioShare Your device comes with a PC utility, MioShare, which allows you to register your device, update software and maps, share experience, and more.
Using WIFI (wireless local area network) Notes: • O n the WIFI settings screen, tap Refresh to search the networks again. Note: This feature is not available on all models. • Y ou can add a network manually by tapping Add Network on the WIFI settings screen. Enter the network name and complete the security setting, and then tap to connect to the network. You can synchronise data (e.g. upload recordings and download saved tracks) with MioShare by accessing the Internet through WIFI.
Pairing with your smartphone • To return to the previous screen, tap • To end the call, tap to minimize the screen. . Note: This feature is not available on all models. Depending on your model, your Cyclo device can be connected with iPhone or Android phones. Note: The compatible phone types include: iPhone 4 or above and Android 2.3 to Android 4.4. Note: For Android phone users, the CycloSmart application is required for your Cyclo device to communicate with your Android phone.
Customising your device Playing music When a connection is made, tap application. on the Main Menu to open the music Depending on your smartphone, tap a song and then playback screen. Note: Depending on your Mio model, certain setting options may not be available. There are various customisation options available to enhance your navigation and cycling experience.
Profiles Dashboard The Profile entry screen displays the existing profile(s). In the Dashboard Layout Change screen, you can change the layout of the following screens: • You can set up to 6 profiles on the device. • Information screen 1 & 2 • Tap Create new profile and enter the personal data (including Name, Birth date, Weight, Gender, and profile Type*) to create a new profile entry.
Phone Tap the Phone option to turn on and off the Bluetooth function of the device. For more information, see the "Pairing with your smartphone" section. Note: For selected models only. Sensors WIFI sync This setting option is for selected models only. By default, the Cyclo device will automatically detect the sensors and enable the available sensor options. Tap the WIFI sync option to turn on the WIFI function of the device. For more information of using WIFI, see the "Using WIFI" section.
Screen Shimano Di2 • Brightness: Drag the slider to the left to decrease the screen brightness or to the right to increase the screen brightness. Note: For selected models only. • Cassette model: Select the proper cassette model. • Cassette type: Select the proper cassette type. Note: You can also decrease/increase the screen brightness by tapping / . Note: Set the lower value first, then the higher value. • Crankset type: Select the proper crankset type.
Alerts • Custom: You can input the Maximum heart rate value manually. • On screen tap: Enable or disable the feedback sound while tapping on the screen. 2. Define the heart rate range in Zone 1 ~ 6 fields according to your personal training purpose. Otherwise, you can just keep the default settings: • Instructions: Enable or disable the sound while getting instructions. • HR Zone Alerts: Enable or disable the alert sound by HR Zone during your workout.
Keyboard Compass The Compass calibration function allows you to calibrate the built-in compass of the device. The device provides Russian, Bulgarian, and Greek keyboard for local users. To calibrate the compass: • From the Keyboard screen, tap on the keyboard you want to use. 1. Tap Enable. 2. Move away from any sources of interference such as microwave oven and magnetic devices. 3. Tap Start calibration. 4.
For more information Product Info The Product Info screen provides the general information of the device, including software and ROM versions, the End User License Agreement, and copyright information. Online support • You can reset the device to the factory default settings by tapping Back to factory. When you select the function, all of the recorded data on the device will be cleared. For 24/7 help and support with Mio products, visit our Technical Support website at: www.mio.
What is GPS? About your heart rate monitor and accessories: • Clean with a mild soap and water solution, dry with towel. The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilised by GPS receivers, such as your Mio, to determine an exact location.
IPX7 • Important instructions (for service personnel only) • Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. • Replace only with the same or equivalent type recommended by the manufacturer. • The battery must be recycled or disposed of properly. • Use the battery only in the specified equipment.
WEEE EN 301 489-17: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment. This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE - 2002/96/EC).
This Agreement does not imply or grant you any rights to future updates or upgrades of the Software unless expressly instructed by Mio in writing. Any updates or upgrades are governed by this Agreement and may be subject to additional payments and other conditions.
ASSIGNMENT: Provided the transferee agrees to the terms of this Agreement, transfer of the Product may be allowed. Such transfer must include all copies of the Software and Documentation without restriction. It also includes all prior versions, updates and upgrades of the Software. (“Limited Warranty”). Such warranties and limitations of liability are entirely incorporated herein by this reference.
