User Manual 100
Welcome Contents Welcome Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Bold — Components or items displayed on screen, including buttons, headings, field names and options. Italics — Indicates the name of a screen.
Knowing your device MAP MODE..........................................................................................................15 MEMORY STATUS...............................................................................................15 PAGE SETTINGS..................................................................................................15 PROFILES..............................................................................................................16 RECORDED DATA...............
Getting started Accessories Your device comes with the following accessories: Note: Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. Charging the battery Your device has an internal battery that may not be fully charged when you purchase it. You should charge the battery for at least 3.5 hours before you start using it for the very first time.
Tip: You will only have to do this the first time you use your Mio. You can change these settings from the SETTINGS menu while using the device. CAUTION: For optimal performance of the lithium battery, note the following: • D o not charge the battery where the temperature is high (e.g. in direct sunlight). The battery will stop charging when the ambient temperature is less than -10ºC (14ºF) or more than 60ºC (140ºF). 4. Once your device is turned on, it will search for satellite signals automatically.
a Installing the device 2 1 b 3. For certain applications, you can change the screen orientation by rotating the3device from portrait to the landscape mode, and vise versa. Follow the instructions in this section to mount the device and the cadence/ speed sensor kit (for selected models only) on your bike. In addition, you will need to put on the heart rate monitor during your workouts. b The bike mount kit includes two types of rubber pads, allowing you to attach the bike mount to your bike securely.
2. Ensure that the magnets are aligned with the sensing area on the sensors. 1 c Putting on the heart rate monitor 3 a The heart rate monitor is used for selected models only. op e n R L open 1. Before using the heart rate monitor, wet the contacts on the back of the chest strap. R R L L d 2 3 1 3. When done, you can pair the sensor(s) with your device from Main menu > SETTINGS > ACCESSORIES > SENSORS.
Operating basics 4. When done, you can pair the monitor with your device from Main menu > SETTINGS > ACCESSORIES > SENSORS. • Select HEART RATE > SCAN to pair the heart rate monitor with your device. Note: The screenshots and other presentations shown in this section are for reference only. They may differ from the actual screens and presentations while you are using the device. Information: The heart rate monitor contains a replaceable CR2032 battery.
System icons The system icons indicating the device's status are displayed at the bottom of the screen. Icon Description 1 3 The GPS signal icon indicates the GPS status. 2 4 The Timer icon will display when training is active. When you stop the timer, the icon will be flashing. ENTER 2 sec. The Alarm icon will display when you set the alarm clock. ENTER The Battery icon indicates the remaining battery power.
WORKOUT mode SPEED/TIME Enter the TTG (time to go) and SPEED settings and then select START. Cycling is a good aerobic fitness exercise that helps you to burn your calories, lose weight and increase your overall fitness. WORKOUT mode on the device allows you to set workouts by entering your conditions: distance, time, and speed. To start a workout, select Main menu > WORKOUT. When the workout starts, the device will analyze and report the workout status on the DASHBOARD screens.
Viewing the HISTORY Use the UP/DOWN button to select the desired function and then press ENTER. • Select TRACK to view the route of the training/workout: Your device will save the history for your trainings and workouts. To view the history data, select Main menu > HISTORY. 1 3 zoom out the map 2 4 zoom in the map - Press ENTER again to display the diagram of speed/heart rate*/cadence*. Information in the History data Select LIST ALL to display all of the recorded trainings and workouts.
Customising your device SETTINGS menu To access the SETTINGS menu, select Main menu > SETTINGS. ABOUT PRODUCT ACCESSORIES • SENSORS • CARDIO • POWER ALERTS • TIME/DIST • SPEED • HEART RATE • CADENCE • POWER • SETTINGS Note: The screenshots and other presentations shown in this section are for reference only. They may differ from the actual screens and presentations while you are using the device. There are various customisation options available to enhance your cycling experience.
ABOUT PRODUCT ALERTS This item displays the version of your device. • TIME/DIST: You can set the alarm to sound when the assigned time/distance is reached. In the TIME ALERT field, select ONCE or REPEAT to set it to sound once or repeat to sound on every specified time. In the DISTANCE ALERT field, select ONCE or REPEAT to set it to sound once or repeat to sound on every specified distance. ACCESSORIES Otherwise, select OFF to disable the alarm.
AUTO LAP COMPASS In the TRIGGER field, select DISTANCE or BY TIME to set the device to record the laps automatically according to the trigger setting. The built-in electronic compass can assist with GPS and improves accuracy when stationary. The compass will need to be calibrated before use. Follow these instructions to calibrate the compass: Otherwise, select OFF to disable the function.
FACTORY RESET MAP MODE This function allows you to restore the device back to factory default status. You can change the viewing angle by selecting NORTH UP or BIRD'S EYE VIEW: Warning! The training data and user profile will be erased. • NORTH UP: Always display North at the top of the Map screen. • BIRD'S EYE VIEW: Displays the aerial image of the location viewed at an angle of approximately 45 degrees.
PROFILES Tip: You can select ON/OFF to display/hide the Custom page 2/3/4 in the DASHBOARD screens. • USER INFO: You can input personal data to ensure more accurate information before your training/workout. • TIME: Select ON/OFF to display/hide the Time screen in the DASHBOARD screens. • MAP: Select ON/OFF to display/hide the Map screen in the DASHBOARD screens. The data fields include: NAME, GENDER, BIRTH DATE, WEIGHT, and HEIGHT. When done, select SAVE.
SLOPE The available setting includes: STAYS ON, 15 SECONDS, 30 SECONDS, 1 MINUTE, or 2 MINUTES. Select the time interval (20/45/90 SECONDS)to collect the data for analysing the slope. You can also adjust the screen contrast level by sliding the Contrast bar. - LANGUAGE: You can select the preferred language displayed for the menus and other interface features while operating the device. - ORIENTATION: For certain applications, you can set the screen orientation as PORTRAIT or LANDSCAPE.
Managing data on the device For more information The PC utility, Mio Share, allows you to register your device, update softwares, share experience, and more. Online support Connect your device to the computer using the USB cable, and then download the Mio Share desktop tool easily from http://mioshare.com and run the desktop tool. Then enter your details and you will receive a confirmation email with a username and password.
What is GPS? About your heart rate monitor and accessories: • Clean with a mild soap and water solution, dry with towel. The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilised by GPS receivers, such as your Mio, to determine an exact location.
IPX7 • Important instructions (for service personnel only) • Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The IEC 60529/IPX7 is a European system of test specification standards for classifying the degrees of protection provided by the enclosures of electrical equipment. An IPX7 designation means that the unit withstands immersion in one meter (approx 3ft) of still water for up to 30 minutes.
EN 61000-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system OF THE CD/DVD/MEMORY CARD, WILL CONSTITUTE YOUR ACCEPTANCE TO THIS AGREEMENT.
recipient agrees to the terms of this Agreement. Any transfer must include all prior versions, updates and upgrades of the Software. Except as set forth above, you may not transfer or assign the Software or any of your rights under this Agreement. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.