User manual

9
Hardware reset
Occasionally, you may need to perform a hardware reset when the recorder stops
responding; or appears to be “frozen” or “locked-up.”
To perform a hardware reset, press and hold the Power key for 5 seconds.
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Press the Menu key to access the Settings menu.
2. Select Date / Time and press the OK key.
3. Use the
▲
and
▼
keys to adjust the value and press the OK key.
4. Repeat Step 3 until all fields have been changed.
Recording in driving mode
Continuous recording
When you connect the car charger to the cigarette lighter in the car, the recorder will start
continuous recording automatically. The recording may be divided into several video clips;
recording will not stop between video clips.
The recorder automatically stops and saves the recording when the vehicle engine is
turned off. If you want to stop recording manually, press the
▼
key.
When recording is not in progress, you can manually start the continuous recording at any
time by pressing the OK key. To stop recording, press the
▼
key.
The continuous recordings can be found in the “Video” category for file playback.