User manual

14
Item Description
Beep Enables or disables system notification sounds.
SafetyCam Alert
Sound
Sets how you want to be notified of safety cameras.
Record upon Power-on Enables or disables the recorder to start recording automatically once it
is powered on.
Video Clip Length Sets the length of each video clip for a continuous recording.
G-Sensor Sensitivity When enabled, the G sensor will prompt the recorder to start recording
automatically if an event happens (in driving mode).
You can change the sensitivity level of the G sensor (in driving mode).
Power-off Delay Recorder can be set to turn off in 10 seconds after power-off.
Language Sets the language.
File Deletion Deletes file(s).
Format Formats a memory card. (All data will be erased.)
Restore to Defaults Restores system settings to factory defaults.
SafetyCam Alert
Distance
Sets the distance level of alerts when you are ahead of safety cameras.
SafetyCam Threshold Sets the speed value for the recorder to start offering alerts.
Volume Adjusts the volume level.
About Displays the software information.