User Manual Series
Table of Contents Getting to know the recorder......................................................................................................... 2 Power key.....................................................................................................................................3 LED indicators..............................................................................................................................3 Function keys...........................................................
Getting to know the recorder NOTE: The screenshots and other presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. Device mount socket For the device mount. 2 Mini-USB connector Connects to the charger or computer. 3 HD OUT connector* Connects to an external device. 4 LCD screen 5 Function keys 6 LED indicator 1 Indicates the system status of the recorder.
Power key Once the vehicle engine is started, the recorder automatically turns on. By default, the recording will start right after the recorder turns on. You can perform the following using the Power key: To manually turn the recorder on and off, press and hold the Power key for 2 seconds. When the recorder is turned on, press and release the Power key to switch the LCD screen on/off.
Function keys The device provides four function keys to control the corresponding icons displayed at the bottom of the LCD screen. The key’s function may vary on different screens. For example, the device will display four icons as shown below while continuous recording is in progress. Example: 1 Icon 2 3 4 Description 1 Press to enter the Settings Menu. Press to manually activate Parking mode.* 2 Press to add a custom safety camera in the current location.* 3 Press to take a photo.
System icons Various System icons on the title bar at the top of the screen provide the status information of your device. The icons displayed will vary depending on your device model and state. Example: Icon Description The REC icon blinks while recording is in progress. Displays the current time. / Recording with sound is disabled/enabled. The GPS signal icon indicates the GPS status.* The Battery icon indicates the remaining battery power. * For selected models only.
Inserting a memory card You must insert a memory card (may be sold separately) before you can start recording. 1. Hold the card by the edges and gently insert it into the slot with the label facing the rear side of the recorder. 2. To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot. CAUTION: DO NOT apply pressure to the centre of the memory card. You are advised to use a Class 6 memory card with at least 8GB capacity.
Using your recorder in a vehicle 1. Make sure that your car is parked on a level ground. 2. Follow the instruction below to mount your recorder in a vehicle securely. 3. Connect the car charger to the cigarette lighter. Route the cables through the top ceiling and the A-pillar so that it does not interfere with driving. Ensure the cable installation does not interfere with the vehicles airbags or other safety features.
4. When adjusting the angle of mounting, make sure that the camera’s view is parallel with the level ground, and the ground/sky ratio is close to 6/4. 3 1 2 5. When not using the recorder, follow the instruction below to remove the recorder from the holder. NOTE: To ensure the highest quality recordings, you are advised to place the recorder near the rear view mirror. Select an appropriate location for mounting the device in a vehicle.
Connecting to external devices Connecting to your computer You can connect the recorder to your computer to access data on the memory card. The Mini-USB connector is located on the right side of the device. Follow the instruction below to connect the rcorder to the computer via the USB cable (not supplied).
Operating basics Turning the recorder ON and OFF Complete the installation according to the instructions in the “Using your recorder in a vehicle” section. Once the vehicle engine is started, the recorder automatically turns on. By default, the recording will automatically start in few seconds after start-up. ) will show on the top-right When a GPS fix is established, the GPS signal icon ( corner of the screen*. The number of the vertical bars in the icon indicates the strength of the signal.
3. Select Automatic or Manual: When you select Automatic, the system will display the time zone setting screen. Use / to select your time zone and press . The system will set the correct date and time according to the time zone setting. When you select Manual, the system will display the date and time setting screen. Use / to adjust the value of the selected field; press until all fields have been changed. When completed, press and repeat the step .
Emergency recording By default, if an event happens, such as sudden impact, high-speed driving, an aggressive turn or an accidental crash, the G sensor will prompt the recorder to start an emergency recording. If you want to manually start an emergency recording while continuous recording is in progress, press . To stop emergency recording and resume continuous recording, press . The emergency recordings can be found in the “Emergency” category for file playback.
Once the movements were detected and recorded during Parking mode, you will be asked to watch the video when you stop Parking mode. Follow the on-screen prompts to watch videos or resume continuous recording. The parking recordings can be found in the “Parking” category for file playback. Camera mode The recorder allows you to take a photo. If the recording is in progress, press to take a photo. The photos can be found in the “Photo” category for file playback.
Safety camera alerts Caution: For legal reasons the safety camera function is not available in all countries. You can receive alerts to warn you about the locations of safety cameras*, which will enable you to monitor your speed through these areas. * For selected models only. When a safety camera appears and is positioned in the detectable direction, you will receive alerts. The screen will display the visual alert*, and you will also receive audio warnings (Beep, Voice, or Mute).
Adding safety camera NOTE: You can add a custom safety camera only when a GPS fix is established. Your recorder allows you to customise the safety camera database. You can add up to 100 custom safety cameras in your recorder. Follow the steps to configure a custom safety camera: 1. To add a custom safety camera in the current location, press screen. on the recording 2. The next time when you pass by the location, you will receive alerts by the recorder.
System settings Settings Menu To customise the system settings, press . NOTE: Depending on your MiVue model, certain setting options may not be available. File Playback Plays the recorded videos and photos. For more information on playback, see the "Playback mode" section. Activate Parking Mode (for selected models only) When the Parking mode function is set to On, you can select this option to manually start Parking mode while continuous recording is in progress.
- Cruise Speed Alert: This option allows you to set the limit for cruise speed. When you drive at a cruise speed over the set value, you will receive alerts by the recorder. Parking Mode (for selected models only) Allows you to change the settings of Parking mode. The available settings include: - Detection: Select On or Off. When enabled, the recorder will start recording automatically when it detects movements or if an event happens in Parking mode. - Auto Entry: Select Easy, Medium, or Difficult.
- Emergency: Change the sensitivity level (6 levels, from Low to High) of the G sensor that allows to automatically trigger the emergency recording while continuous recording is in progress. The event recordings will be stored in the “Emergency” category. - Parking Mode (for selected models only): Change the sensitivity level (3 levels, from Low to High) of the G sensor that allows to automatically trigger the parking recording when the recorder is in Parking mode.
MiVue Manager MiVue Manager is a tool for you to view the videos recorded on a MiVue recorder. Not all features are available for every model. Installing MiVue Manager Download MiVue Manager from www.mio.com and follow the on-screen prompts to install it. Playing the recording files 1. Remove the memory card from the recorder and access the card on the computer via a card reader. You are advised to copy the recording files to your computer for backup and playback.
NOTE: The Map screen may not display when the computer is not connected to the Internet or when your MiVue model does not support the GPS function. G sensor chart displays data in 3-axis waveform about the car’s shift forward/ backward (X), to the right/left (Y) and upward/downward (Z). 3. By default, MiVue Manager shows the calendar and the file list on the right. When a recording file exists, you will see the date marked with “▲.
/ : Mutes or unmutes the volume. : Adjusts the volume level. : Plays the video in full screen. Click to return to the normal view. : Displays the playback progress. You can click on a point along the track bar to move directly to a different location for the playback. 6. The tool bar allows you to do the following: Click to select the folder that stores the recording files. Click to preview and print the current video image.
For more information Precautions and notices For your own safety, do not operate the controls of the product while driving. A window mount is needed when using the recorder in a car. Make sure that you place the recorder in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags. Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean.
Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery CAUTION! This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or water. Use a specified battery in the equipment.
Caring for your device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage. Keep your device away from excessive moisture and extreme temperatures. Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of your device or drop objects on your device. Do not drop your device or subject it to severe shock. Do not subject your device to sudden and severe temperature changes.
Regulatory information (CE) For regulatory identification purposes, MiVue 5 Series is assigned a model number of N467. Products with the CE marking comply with the Electromagnetic Compatibility Directive (2004/108/EC) - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards: EN 301 489-1 V1.9.2 : 2011 -EN 61000-4-6 : 2009 EN 301 489-3 V1.4.
Revision: R01 (08/2014) Disclaimer Specifications and documents are subject to change without notice. MiTAC does not warrant this document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the documents. Notes Not all models are available in all regions. Depending upon the specific model purchased, the color and look of your device and accessories may not exactly match the graphics shown in this document.