Operating Instructions

10
en
Tap / to adjust the value of the selected field; tap and repeat the
step until all fields have been changed. When completed, tap .
Setting up a WIFI connection
MiVue 658 WIFI features the WIFI function that allows you to connect the recorder to your
smartphone.

The WIFI function is enabled by default. You can manually enable or disable WIFI by
tapping > and then select or .

The WIFI setting screen displays the SSID and password of the device.

To use the recorder's Event/Share button to transfer files you will need to install the
MiVue app onto your smartphone. Search for, download and install the app onto your
smartphone.
Follow the steps below to build the wireless connection between the recorder and your
smartphone:
1. When you use the smartphone* to connect for the first time, turn WLAN on from the
phone's Settings menu. The phone will automatically scan for available wireless devices.
Tap the WLAN option to display the detected devices. From the list select the recorder's
name (MiVue-xxxxxx) and enter the password (xxxxxxxxxx). When done, tap Connect.
The next time you use your smartphone to connect to the recorder you will not be
prompted to enter the password again (unless you reset your phone to the factory
default settings).
* The instructions about operating the smartphone are for reference only. The actual
setting options and methods may vary depending upon your phone type/model.
2. Check the WIFI connection status by reading the WIFI icon on the recorder:
: The recorder is connected to the smartphone and paired with MiVue app.