Operating Instructions

11
en
: WIFI is turned on but the recorder is not connected to the smartphone.
: WIFI is turned on and the recorder is connected to the smartphone but not paired
with MiVue app yet.
3. By starting the MiVue app on your smartphone the recorder will be ready to transfer
video files by simply pressing the Event/Share button.
Recording in driving mode
Continuous recording
By default the system will automatically begin with continuous recording in a few seconds
after start up. The recording may be divided into several video clips; recording will not stop
between video clips.

To stop continuous recording, tap .

To start recording manually, tap .

The continuous recordings can be found in the “Video” category for file playback.
Event recording
By default if an event happens such as a sudden impact, high speed driving, an aggressive
turn or an accidental crash the G sensor* will prompt the recorder to start recording the
event.
* You can change the sensitivity level (6 levels, from Low to High) of the G sensor by
tapping > > > .

If you want to manually start an event recording while continuous recording is in
progress, press the Event/Share button on the device.

The event recordings can be found in the “Event” category for file playback.