User manual

9
en
Operating basics
Turning the recorder on
Complete the installation according to the instructions in the “Using your recorder in a
vehicle” section. Once the vehicle engine is started the recorder automatically turns on.
Restarting the recorder
Occasionally you may need to perform a hardware reset when the recorder stops
responding or if it appears to be “frozen” or unresponsive. To restart the recorder press and
hold the Power button until the system is shut down; press the Power button again to turn
the recorder on.
Note: If the system does not shut down by keeping the Power button pressed you can
force it to shut down by inserting a small rod (such as a straightened paperclip) into the
Shutdown button on the top of the device.
Shutdown button