User manual

12
en
Recording in driving mode
Continuous recording
By default the system will automatically begin with continuous recording in a few seconds
after start up. The recording may be divided into several video clips; recording will not stop
between video clips.

When continuous recording is in progress you can manually stop recording by pressing
.

Press to return to the recording screen; the system will start continuous recording
automatically.

The continuous recordings can be found in the “Video” category for file playback.
Event recording
By default if an event happens such as a sudden impact, high speed driving, an aggressive turn
or an accidental crash the G sensor* will prompt the recorder to start recording the event.
* You can change the sensitivity level (6 levels, from Low to High) of the G sensor by
selecting > Video Recording > G-Sensor Sensitivity.

If you want to manually start an event recording while continuous recording is in
progress press the Event button on the device.

The event recordings can be found in the “Event” category for file playback.
Recording in Parking mode
Your recorder supports the parking recording function. Depending upon how long the car is
parked you may need an additional power source (e.g. an uninterruptible power cable like
Mio Smart Box which is sold separately) to record the video during Parking mode.

The Parking mode function is disabled by default. You have to enable the function by
selecting > Parking Mode > Detection > On.

Before enabling Park mode please check your device memory storage allocation. Go to