User manual
Table Of Contents
- Getting to know your dash cam
- Using your dash cam in a vehicle
- Inserting a memory card
- Connecting to your computer
- Turning the dash cam on
- System icons
- Function keys
- Setting the date and time
- Recording in driving mode
- Recording in Parking mode
- Camera mode
- Playback mode
- Getting connected
- System settings
- MiVue Manager
- For more information
16
automatic triggering of the parking recording when the dash cam is in Parking
mode.
l
Video Recording
Changes the settings of recording, including:
l
Video Clip Length: Sets the length of each video clip for a continuous
recording (1 min, 3 min or 5 min).
l
WDR: Enables the WDR (Wide Dynamic Range) function to improve the dash
cam's image quality under high-contrast lighting conditions.
l
EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image.
The default setting is 0.
l
Frequency: Sets the frequency to match the icker frequency of the local
power supply when recording.
l
G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
l
Stamps: Sets the information (Coordinates or G-Sensor) that will be
displayed on the recorded video.
l
Speed stamp: Displays the driving speed on the recorded video.
l
Text stamp: Displays customisable text information.
l
System
Allows you to change the system settings of the device.
l
Satellites: Displays the status of the GPS/GLONASS signal reception. You
can press and then select GPS or GLONASS for better signal reception if
the need arises.
l
Date/Time: Sets the system date and time.
l
System Sound: Enables or disables system notication sounds.