User Manual
Table Of Contents
- Getting to know your dash cam
- Using your dash cam in a vehicle
- Inserting a memory card
- Connecting to your computer
- Turning the dash cam on
- System icons
- Function keys
- Setting the date and time
- Recording in driving mode
- Recording in Parking mode
- Camera mode
- Playback mode
- Getting connected
- System settings
- MiVue Manager
- For more information
12
When the Parking mode detection is enabled, the system will enter Parking mode
when you:
l
Disconnect the device's power (for example, when the vehicle engine is stopped
or the power cable is disconnected) or when the car stops moving for about 5
minutes.
Note: ThefeatureistriggeredbytheGsensorofthedevice.Youcanchangetheconguration
by selecting > Parking Mode > Auto Entry.
l
Press
to manually start Parking mode while continuous recording is in
progress.
The Parking indicator ashes in red when Parking recording is in progress.To stop
Parking mode and resume continuous recording, press . If movements are
detected and recorded during Parking mode, you will be asked to playback the
video when you stop Parking mode.
The parking recordings can be found in the “Parking” category for le playback.
Camera mode
The dash cam allows you to take a photo: press > Camera > .
The photos can be found in the “Photo” category for le playback.
Playback mode
To select a video or photo for playback:
1. Press
> File Playback.
2. Select the desired type.
3. Press / to select the desired le from the list and then press to
start playback.