User Manual
Table Of Contents
- Getting to know your dash cam
- Using your dash cam in a vehicle
- Inserting a memory card
- Connecting to your computer
- Turning the dash cam on
- System icons
- Function keys
- Setting the date and time
- Recording in driving mode
- Recording in Parking mode
- Camera mode
- Playback mode
- Getting connected
- System settings
- MiVue Manager
- For more information
7
Inserting a memory card
Note:
l
DO NOT apply pressure to the centre of the memory card.
l
MiTAC does not guarantee the product’s compatibility with memory cards from all manufacturers.
l
Beforeyoustartrecording,pleaseformatthememorycardtoavoidmalfunctioncausedbyles
not created by the dash cam.
l
Turn the device off before removing the memory card.
You must insert a memory card (not supplied) before you
can start recording. The dash cam supports the Class 10
memory cards with 8 GB – 128 GB capacity.
Hold the card (MicroSD) by the edges and gently insert it
into the slot as shown in the illustration. To remove a card,
gently push the top edge of the card inwards to release it
and pull it out of the slot.
Formatting a card
To format a memory card (all data will be erased), press
and select Format.
Connecting to your computer
You can connect the dash cam to your computer to
access data on the memory card. Connect the dash
cam to the computer via a USB cable (not supplied).