Operation Manual

13
Recording in driving mode
Continuous recording
By default, the system will automatically begin with continuous recording in a few
seconds after start-up. The recording may be divided into several video clips;
recording will not stop between video clips.
When continuous recording is in progress, you can manually stop recording by
tapping . Tap to return to the recording screen; the system will start
continuous recording automatically.
The continuous recordings can be found in the “Video” category for le playback.
Event recording
By default, if an event happens such as a sudden impact, high speed driving, an
aggressive turn or an accidental crash during continuous recording, the G sensor
will prompt the dash cam to start recording the event.
Note: You can change the sensitivity level of the G sensor by selecting > > > .
If you want to manually start an event recording while continuous recording is in
progress, tap on the recording screen.
The event recordings can be found in the “Event” category for le playback.