Operation Manual

10
en
3. Press REC/OK to complete calibration.

G-Sensor Setting: Sets the sensitivity level (Off, High, Medium or Low) of the G sensor
that allows automatical triggering of the event recording while continuous recording is
in progress.
System settings

Language: Sets the language.

Driver ID Setting: This option allows you to enter the driver's name.
1. Use the / button to select the desired characters.
2. Press MODE to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press REC/OK.

Date/Time: Sets the system date and time.
1. Use the / button to adjust the value of the selected field.
2. Press MODE to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press REC/OK.

LCD Standby: Selects Off to keep the LCD on; or sets the timer for the LCD to turn off
automatically (15 sec, 30 sec or 1 min) after recording starts.

Power-off Delay: The recorder can be set to turn off in specified time (10 sec, 30 sec or
1 min) after power-off. Selects Off to turn it off immediately after power-off.

Beep: Enables or disables system notification sounds.

Format: Formats a memory card. (All data will be erased.)

Default Setting: Restores system settings to factory defaults.

Version: Displays the software information.