Operating Instructions
Table Of Contents
- Moov 500 V2 English HW Manual for USA
- Moov 500 V2 English MioMap Manual for USA
- Important safety information
- Welcome
- How do I get started?
- What are the main screens I will use?
- How do I navigate with GPS?
- How do I go from A to B?
- How do I save Favorites and My Home?
- How do I navigate to a recent location?
- How do I view my route?
- How do I preview a route?
- How do I view my route statistics?
- Traffic
- What can I customize?
- What is MioMore Desktop?
- Reference
- For more information
4
Charging the battery via the USB cable
If you intend to charge your Mio in this way, turn off your Mio so that it takes less time to charge the battery.
1. Turn on the computer.
2. Connect the mini-USB end of the USB cable to the bottom of your Mio and the other end to a USB port on
your computer.
3. The charge indicator glows amber when charging is in progress. When the battery is fully charged, the
indicator turns green.
Note: If your Mio is on when connected to a computer, a screen appears to prevent you from using your Mio.
Note: When the Mio is connected to a computer, it is recognized as an external mass storage device. Do not delete any files
pre-installed in the Mio. Deleting files of which the function is unknown can cause programs or features to malfunction.
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging.
Fully charge the battery at least every two weeks. Not charging the battery can affect the battery’s performance.