Moov S Series Hardware Manual
Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE z z z z z Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications. Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.
Safety precautions About charging z z z Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 1.0 A”. Use a specified battery in the equipment. About the charger z z z z z Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet.
Contents Important safety information .......................................................................................................................... 2 Safety precautions......................................................................................................................................... 3 About charging .......................................................................................................................................... 3 About the charger .................
Welcome Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
Mounting your Mio in a vehicle CAUTION: Never mount your Mio where the driver’s field of vision is blocked. If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your Mio where there is a “clear area” - usually just beneath the rear-view mirror. To protect your Mio against sudden surges in current, connect the in-car charger only after the car engine has been started.
Enabling Traffic (TMC) Reception Note: Traffic information is not available on all models and is only available in selected countries. Depending on the model of your Mio you can receive live traffic information in one of two ways: z z If your Mio has a built-in TMC receiver, you can receive live traffic information* via the in-car charger which is used as an antenna. If your Mio does not have a built-in TMC receiver, you will need to install the TMC accessory kit (may be sold separately - see www.mio.
Getting to know your Mio S300 Series n Power switch r Connector for in-car charger, USB cable, home charger (sold separately) and TMC accessory kit (may be sold separately) o Speaker s Main Menu button p Cradle slot t Touch screen q Slot for microSD™ memory card u Battery indicator 8
S500 Series n Power switch s Touch screen o Cradle slot t Battery indicator p Speaker u Main Menu button q Connector for in-car charger, USB cable, home charger (sold separately) and TMC accessory kit (may be sold separately) v Microphone (not on all models) r Slot for microSD™ memory card 9
S700 Series n Power switch t Connector for in-car charger and USB cable o Slot for microSD™ memory card u Microphone (not on all models) p Cradle slot v Touch screen q Speaker w Battery indicator r Socket for in-car charger and home charger (sold separately) s Connector for TMC accessory kit (may be sold separately) or AV cable (not on all models) Main Menu button Note: Depending on your model, the connector will be for either the TMC accessory kit or AV cable, but not both.
How do I turn on my Mio? Using the power switch z To turn on your Mio, slide the power switch to the ON position. To turn off your Mio, slide the power switch to the OFF position. Your Mio will enter a suspended state. When you next turn it on, your Mio will return to the last screen that you used. z To reset your Mio, slide the power switch to the RESET position.
How do I charge the battery? Your Mio has an internal battery that when fully charged, should provide power for up to 2 hours. The battery can take up to 4 hours to fully charge. Note: The battery may not be fully charged when you use your Mio for the first time. CAUTION: For optimal performance of the battery, note the following: Do not charge the battery when the temperature is high (e.g. in direct sunlight). There is no need to fully discharge the battery before charging.
How do I insert a memory card? CAUTION: Do not apply pressure to the centre of the memory card. S300 Series S500 Series S700 Series Hold the microSD™ card by the edges and gently insert it into the slot as shown in the above diagrams of your Mio. To remove a card, gently push the top edge of the card inwards to release it, then pull it out of the slot.
Other features How do I make a hands-free call? Note: Hands-free calling is not available on all models. If you have a mobile phone with Bluetooth wireless technology, you can use your Mio as a hands-free car kit. Before you can use this feature you must pair your mobile phone with your Mio. Note: Ensure that the Bluetooth wireless feature of your mobile phone is turned on before you begin pairing. Not all phones with Bluetooth wireless technology are compatible with your Mio.
How do I receive audio through my vehicle speakers? Note: FM transmitting and MP3 are not available on all models and are only available in selected countries. Your Mio can be set to transmit sound at a particular FM frequency which you can then receive through your vehicle radio. This means that you can hear map voice guidance, mp3 files and video files clearly and loudly through your vehicle speakers. WARNING: The FM transmitter function is not allowed to use in Cyprus, France and Greece.
Reference What is GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilised by GPS receivers, such as your Mio, to determine an exact location.
z z Never attempt to disassemble, repair or make any modifications to your Mio. Disassembly, modification or any attempt at repair could cause damage to your Mio and even bodily injury or property damage and will void any warranty. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your Mio, its parts or accessories. Troubleshooting If you encounter a problem you cannot solve, contact an authorised service centre for assistance.
Regulatory information WARNING: This product, its packaging and its components contain chemicals known to the State of California to cause cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65. Regulations statements (S300 Series) European Notice Note: For regulatory identification purposes, Moov S300 Series is assigned a model number of N223.
Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the Commission of the European Community.
Regulations statements (S700 Series) European Notice Note: For regulatory identification purposes, Moov S700 Series is assigned a model number of N225. The manufacturer is not responsible for any radio or TV interference caused by unauthorised modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Marking labels located on the exterior of your Mio indicate the regulations that your model complies with.
This equipment may be operated in: AT BE BG CH CZ DE DK EE ES FI GB HU IE IS IT LI LT LU LV MT NL NO PL PT RO RU SE SI SK TR Bluetooth (for models with Bluetooth capabilities only) Bluetooth QD ID B015258 21
Moov S Series User Manual
Contents How do I use the touch screen?....................................................................................................................... 5 How do I get started? ........................................................................................................................................ 6 How do I turn my Mio on for the first time? ............................................................................................ 6 Main Menu..........................................
How do I set the audio output channel of my Mio through my car’s FM radio? .............................30 How do I make a hands-free call? ................................................................................................................. 31 How do I pair my Mio with a Bluetooth mobile phone?....................................................................... 31 Paired phone details screen .....................................................................................................
Traffic and other TMC events.........................................................................................................................55 Appendices ........................................................................................................................................................56 For more information..................................................................................................................................56 User Manuals ............................
How do I use the touch screen? By default, your Mio starts in button mode, to scroll up or down, or dock/undock, use the buttons to the right of the main page. You can change to Slide Touch™ mode: tap Æ List Scrolling. In Slide Touch™ mode, your Mio touch screen options change dynamically: z To see all options on a menu, drag the screen up or down. z To display the next screen, tap an icon or select an option. z To dock a menu to the left, tap the left edge of the menu.
How do I get started? Note: The first time you use your Mio it may take several minutes to establish a GPS connection. How do I turn my Mio on for the first time? To get started for the first time, complete the following steps: 1. Read the Important Safety Information in the Hardware Manual. 2. Position your Mio in your vehicle according to the instructions in the Hardware Manual.
Main Menu The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Mio, receive updated traffic information (not available on all models) and make and receive phone calls (not available on all models). To display the Main Menu, press on your Mio at any time. Display the Map screen. Undock the menu to enter an address to navigate to. Search Google online for live POI information. Search for places, areas and streets to help plan your route.
How do I go from A-B? Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... need to search for an address need to find a named site, feature, landmark or public venue search for live POI information want to navigate to a recently visited location tap then Find an Address to search for the address.
How do I plan my first trip? Using your Mio to plan your first trip is easy. There are several ways to select your destination. This section will show you how to navigate to a street address using the FIND address wizard. Æ Æ Æ Æ Complete the following: If you want to ... Then ... calculate the route, open the Map screen and start navigating tap . The Map screen will display. tap . The location is saved as My Place. (See “My Places” on page 20 for details.
How do I set my route preferences? You can enhance your navigation experience by modifying aspects of your route and route calculations. 1. From the Map screen, tap the undock button or tap the docked menu in Slide Touch™ mode. 2. To set your Map screen preference, scroll down the screen and then tap the button in the Map section to select either a 3D or 2D view of the Map screen. 3. To change other preferences, tap Other Options. The Other Options screen will display. 4.
How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. Æ Æ Æ Æ Æ Complete the following: If you want to ... place a phone call to the POI Then ... tap . Note: This feature is not available on all models.
How do I view my route? When a route has been calculated, the Map screen will display. You will be directed to your destination by spoken and visual instructions. n o p q r n Item Description Distance and Time Information This will show either your: z z z z s Arrival time (estimated) Time to go (estimated) Distance to go No details at all This is dependant on your route preference settings.
If you want to ... Then ... add a location as a via point (waypoint) on your trip tap the undock button or tap the docked menu in Slide Touch™ mode and then switch to the Turns screen. to Tap New Via Point. Select the way you want to add a via point. When a new via point is added, your route will be recalculated. (See “How do I create a trip with multiple stops?” on page 26 for details.
How do I use the Explore map? The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position. Tap and drag the map to explore your desired area. POIs of the specified category will be displayed. Tap a POI for more information or navigate to the POI. 1. 2. Æ The Explore screen will display.
How do I navigate to a POI using the Explore map? Æ Æ Æ Æ Tapping on the POI selected (in red square) will bring up the Explore menu with the POI destination details. Complete the following: If you want to ... place a phone call to the POI Then ... tap . Note: This feature is not available on all models. calculate the route, open the Map screen and start navigating save the location as a favourite search for an similar POI tap . The Map screen will display. tap . The location is saved as My Place.
3. Complete the following: If you want to ... Then ... display all POI icons (i.e. icons from all categories) tap All Places. select a specific POI category icon for display on the Map screen tap the required POI category to show on the Map screen.
How do I navigate to a recent place? To make navigating to an address easier, your Mio will automatically save all your start locations and destinations in a list of recent places. 1. Æ The Create a Route screen will display. 2. From the Create a Route screen tap Recent Places. 3. Select a recent place from the list. Tip: You can sort your recent places by date, category type or alphabetical order. 4. Your route is calculated and the Overview screen will display.
How do I preview a route? Route demonstration allows you to: z Preview a route. z Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview a route. 1. Select a departure point. Note: If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) Æ The Create a Route screen will display. b) Tap From. The Leaving from… screen will display.
How do I view my route statistics? Your Mio provides information on your: z distance to go z time to go z estimated time of arrival z average speed To view your route statistics during a planned route: 1. Æ The Overview screen will display. 2. Tap to switch to the Stats screen.
My Places My Places has all your saved and captured locations. It also contains POIs and NavPix™ you have downloaded onto your Mio via MioMore Desktop. How do I save a location as My Place? 1. Search for an address until the Preview screen is displayed. 2. Tap to save the location as My Place. The location icon will become red on the map and the create date/time will display. 3. Complete the following: If you want to ... Then ...
How do I navigate to a location I have saved? 1. Æ The My Places screen will display. 2. Tap the favourite destination you want to travel to. The Preview screen will display. 3. Tap . Your Mio will calculate the route from your current location. The Map screen will display. How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard. 1. Æ The My Places screen will display.
How do I delete a saved location? 1. Æ The My Places screen will display. 2. Select the location you would like to delete. The Preview screen will display. 3. Tap Delete. The location is deleted. The My Places screen will display. How do I navigate to a NavPix™? Note: NaxPix™ images may also be referred to geocoded pictures. NavPix™ is an image or picture, normally of a location, which contains embedded GPS coordinates that you can navigate to. Sample NavPix™ images may be pre-installed on your Mio.
If you want to ... Then ... view NavPix™ location on the map tap the dock button or tap the edge of the menu in Slide Touch™ mode to dock the menu. How do I view a NavPix™ in full-screen? 1. From the NavPix Details screen tap the thumbnail of the NavPix™. The NavPix™ will display in full-screen. 2. Complete the following: If you want to ... Then ... zoom into the NavPix™ tap . zoom out of the NavPix™ tap . return to the NavPix Details screen tap . How do I view NavPix™ in slideshow? 1.
How do I capture a location or a journey? Note: The capture feature is not available on all models. Your Mio has a capture feature which allows you to record GPS coordinates of a location, capture a location with a voice recording and capture a journey and save them so you can navigate back at a later time. How do I capture the GPS coordinates of my location? 1. Æ The Capture screen will display. 2. Tap Save. The location is saved as My Place. How do I capture a location with a voice recording? 1.
2. Travel on your journey. Your Mio will keep a record of where you travel. 3. Æ At the end of your journey, The Capture screen will display. 4. Tap 5. Tap Save. The journey is saved as My Place. . The Journey screen will display. How do I navigate to a location I have captured? 1. Æ The My Places screen will display. 2. Tap the captured destination you want to travel to. The Preview screen will display. 3. Tap . Your Mio will calculate the route from your current location.
How do I create a trip with multiple stops? You can use the New Via Point screen to set multiple stops or via points (waypoints) for your trip. Your route will be calculated to go via each of these points in the specified order. 1. Æ The Create a Route screen will display. 2. Tap From and set a location as your departure point. You can set a location as a departure point using Home, My Places, Find a Place, Recent Places or Pick on Map.
How do I delete a via point from my trip? To delete a via point from your trip, tap the undock button or tap the docked menu in Slide Touch™ mode, and then to switch to the Turns screen. Tap the via point you want to delete, then tap Delete Via Point. When a via point is deleted, your route will be recalculated.
How do I play media? Note: Media is not available for all models and is only available in some countries. Media allows you to play stored audio files installed on your Mio. You can use MioMore Desktop to import audio files to your Mio. (See the MioMore Desktop Manual for more information.) Æ Playing audio files Only mp3, wma, wav, aac audio formats are supported for the audio feature. You can play audio files that are stored on your Mio by a random order, artist and albums.
If you want to ... Then ... The display area shows the current status, including the play/pause/stop status, elapsed/total time, volume level and the media information of the current song. (The availability of media information such as the album name, artist name, and song title depends on individual files.) listen to the previous audio file skip the current audio file pause the audio file adjust the volume mute the volume unmute the volume set play settings tap . tap . tap . Tap . tap tap tap . .
How do I receive audio through my vehicle speakers? Note: FM transmitting is not available on all models and is only available in selected countries. Your Mio can be set to transmit sound at a particular FM frequency which you can then receive through your vehicle radio. This means that you can hear map voice guidance, radio, mp3 files and video voice files clearly and loudly through your vehicle speakers.
How do I make a hands-free call? Note: Hands-free calling is not available on all models. If you have a mobile phone with Bluetooth wireless technology, you can use your Mio as a hands-free car kit or to provide an internet connection. It can also be used to connect to a Bluetooth mono/stereo earphone to output audio. Models with Bluetooth capabilities can exchange information over a distance of about 10 metres (30 feet) without requiring a physical connection.
z Download phonebook z Answer or ignore incoming call z Dial a number through the Dial, Phonebook and Call History screens Configuring Internet settings The Internet connection when turned on allows you to access live information over the Internet. 1. To change Internet settings, from the Phone Details screen tap OFF next to the Internet connection option. 2. Tap Configure internet settings. The Internet Settings screen will display. 3. Complete the following: If you want to ... Then ...
How do I make a phone call? Æ 1. From the Phone screen tap Dial. The Dial screen will display. 2. Enter the number you want to call. Note: The number of the last call will display when you next access the Dial screen. The number will be cleared as you start entering a new number. z To delete the last digit entered, tap z To clear the entire number, tap and hold . . Note: International calls require a country code to be included in the phone number.
How do I receive a phone call? When you receive a call, the Incoming call screen will display. z Tap Answer to answer the call, or Ignore to reject the call. z Tap on the volume bar to increase or decrease the volume. z Tap Hang Up to end a call you have answered. How do I add a contact to my Mio? Your Mio uses contacts created on your mobile phone. To add a new contact to your Mio, you must first add it to your mobile phone. Refer to your mobile phone user manual for more information.
2. Select a contact from the list. The View screen will display. 3. Complete the following: If you want to ... Then ... call the contact on their mobile phone tap Mobile. The Dialling screen will display. call the contact on their home number tap Home. The Dialling screen will display. call the contact on their work number or any tap Work. The Dialling screen will display. other number delete the contact from your phonebook tap . The contact is deleted and the Phonebook screen will display.
Icon Description Outgoing calls Incoming calls Missed calls How do I clear my call history? From the Call History screen tap Delete All Æ Yes to delete all calls in call history. How do I pair my Mio with a Bluetooth headset? 1. Æ The My Mio screen will display. 2. Tap Bluetooth. The Bluetooth screen will display. 3. Tap Bluetooth ON to switch on the Bluetooth and set your Mio in discoverable mode. 4. Tap Connect to Headset. 5. Tap Search for devices.
What is Travel Book? Note: Travel book is not available on all models and is only available for selected countries. Travel book is a collection of city guides that provide detailed Points of Interest maps for major cities in Europe. The city guides provide information on accommodation, dining, night life, business essentials, shopping, important tourist spots and practical information such as banks, medical centres, bus stations etc.
If you want to ... Then ... calculate the route, open the Map screen and start navigating tap save the location to bookmarks tap Mark this place. The location is saved as a bookmark. . The Map screen will display. To view the bookmarks you have saved, tap Bookmarks on the City screen. Note: To delete a location from bookmarks, tap Unmark this place on the Preview screen. save the location as a favourite explore the area near the location . The location is saved as My Place.
What is Google Local Search? Note: Google Local Search is not available on all models and is only available in some countries. Google Local Search allows you to search online for live POI information. To use Google Local Search, you must pair your Mio with your mobile phone. If your Mio isn’t paired with your mobile phone then the Bluetooth screen will display. How do I search for a POI using Google Local Search? 1. Æ The Terms and Conditions screen will display. Tap Accept. 2.
7. The search results screen will display. You may need to select a specific POI category for display. 8. Select a POI from the list. The Preview screen will display. 9. Complete the following: If you want to ... place a phone call to the POI Then ... tap the phone number. Note: This feature is not available on all models. calculate the route, open the Map screen and start navigating tap save the location as a favourite . The location is saved as My Place.
What is MioMore Service? Note: MioMore Service is not available on all models and is only available in some countries. MioMore Service allows you to search for live POI information and get updated weather when travelling (only available on Mio models that support Bluetooth). To use MioMore Service, you must pair your Mio with your mobile phone. If your Mio isn’t paired with your mobile phone then the Bluetooth screen will display.
7. Tap Search. 8. The search results screen will display. You may need to select a specific POI category for display. 9. Select a POI from the list. The Preview screen will display. 10. Complete the following: If you want to ... place a phone call to the POI Then ... tap the phone number. Note: This feature is not available on all models. calculate the route, open the Map screen and start navigating tap . The Map screen will display. save the location as a favourite tap .
6. Complete the following: If you want to ... place a phone call to the assistance centre Then ... tap . Note: This feature is not available on all models. change the region for a new search tap Home base and then select your preferred region. change to another assistance centre tap Club and then select your preferred centre. How do I find the weather information? 1. Æ The MioMore Service screen will display. 2. Tap Weather. 3. Tap Accept on the agreement screen. 4.
How do I receive current traffic information via TMC? Note: Traffic information is not available on all models and is only available in selected countries. Your Mio can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur.
If you want to ... Then ... change your preferred TMC service provider tap Service and select your preferred service from the list. display traffic events on the map Tap the dock button or tap the edge of the menu in Slide Touch™ mode to dock the menu. The Traffic map will display. How do I view the Traffic map? n s o pq Item n r Description Tap to zoom into an event cluster containing a group of events close together. o Event icon Display an icon to indicate type of event.
How do I avoid an event on my route? Æ 1. Tap to switch to the Turns screen. 2. When a traffic event occurs on your route, the section of the route affected is marked with an event icon. 3. Tap the section you want to avoid. 4. From the Turn Details screen tap Avoid this Turn. Your route will be recalculated.
Walking mode Note: Walking mode is not available on all models. Walking mode allows you to navigate to your destination using roads and paths appropriate for a pedestrian, including non-vehicle segments. Note: When in Walking mode, you will not be routed onto motorways and their associated slip roads. If your destination is more than 10 kilometres (6.3 miles) away, a warning message is displayed indicating that the route is a long way to walk.
What can I customise? There are various customisation options available to enhance your navigation experience. Æ Volume Complete the following: If you want to ... Then ... increase or decrease the volume tap to move the Volume slider to the right to increase the volume. tap to move the Volume slider to the left to decrease the volume. Your preferences are automatically saved. Day/night Complete the following: If you want to ... Then ...
Complete the following: If you want to ... Then ... enable the Slide Touch™ interface and not use arrows to navigate on a screen select the Slide Touch™ option. disable the Slide Touch™ interface select either the Buttons (right-handed) or Buttons (left-handed) option. Your preferences are automatically saved. Brightness Complete the following: If you want to ... Then ... change the screen brightness tap to move the slider towards right to increase screen brightness.
Complete the following: If you want to ... Then ... enable the screen saver feature on your Mio tap Screen Saver. When your Mio is idle for 2/5/10 minutes, the screen saver will display. Note: The screen saver will only display if your Mio is connected to a power supply. disable the screen saver feature on your Mio tap Screen Saver and select Off. Your preferences are automatically saved. Bluetooth Note: Bluetooth is not available on all models.
Complete the following: If you want to ... Then ... receive audio output through your Mio Select the Internal Speaker option. receive audio output through the FM radio in your car Select FM transmitter and then select your FM frequency. For more information, see “How do I receive audio through my vehicle speakers?” on page 30. Your preferences are automatically saved. Privacy Complete the following: If you want to ... Then ...
Units Complete the following: If you want to ... Then ... change the distance units select your preferred distance unit type from the Units screen. Your preferences are automatically saved. Time zone Complete the following: If you want to ... Then ... change your Mio time zone select your preferred time zone from the list. Your preferences are automatically saved. Touch audio The Touch Audio option allows you to hear a tone when you tap the touch screen. Complete the following: If you want to .
Restore defaults The Restore Defaults option allows you to restore default factory settings. Complete the following: If you want to ... restore factory default settings Then ... tap Restore Defaults. Note: The option does not delete recent locations or saved My Places destinations. Your preferences are automatically saved. About Tap About to display copyright and trademark information.
Point of Interest categories Icon Description Icon Description Icon Description Airport Bank/ATM Bus station Camping ground Car facility Education Entertainment Ferry/Marina Historical buildings Hospital Hotel Metro station Museum Parking Petrol station Place Pub Rest area Restaurant Shopping Sport centre State office Temple Theatre Tourist attraction Tourist information Towns & Cities Train station Visiting the City Zoo Branded Points of Interest Branded Points of Intere
Traffic and other TMC events Each TMC event is sorted in to one of nine categories. When an event is received, one of the following icons will display: Event Message Type Event Description Closed A section of the route has been closed and no entry permitted. Danger There is a dangerous situation on the route; for example, people are on the road. Queue Any event that will cause a delay on a route. Weather Weather conditions are adversely affecting a route; for example, there is ice on the road.
Appendices For more information User Manuals The latest User Manuals can be downloaded from our website: www.mio.com Register with MioClub If you have a faulty product or you would like to speak to a member of our Technical Support team, register your Mio on MioClub to obtain the Technical Support phone numbers for your Mio and your region. Speed limit Mio products are designed to be used as an aid to safer driving. Mio does not condone speeding or any other failure to comply with your local traffic laws.
Copyright © 2009 MiTAC International Corporation. Mio is a registered trademark of MiTAC International Corporation and is used under licence by Mio Technology NZ Ltd. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
Moov S Series MioMore Desktop Manual
Contents Welcome..............................................................................................................................................................4 Important information for using the manual ...........................................................................................4 What is MioMore Desktop?..............................................................................................................................
Music...................................................................................................................................................................23 How do I import a media file to my MioMore Desktop library? .........................................................23 How do I import a folder to my MioMore Desktop library? ................................................................23 How do I transfer a music file from MioMore Desktop to my Mio?....................................
Welcome Thank you for purchasing this MioMore Desktop software. Please read this manual carefully before using MioMore Desktop for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
What is MioMore Desktop? MioMore Desktop is a suite of tools you can use to access greater functionality and product information via your computer.
MioMore Desktop menu Note: Not all features are available on all models. The total number of buttons shown on the left side of the window varies by model. Some features are disabled when your Mio is not connected. Note: Before you transfer any data to and from your Mio, make sure that your Mio is connected to your computer via the USB table. n o p q r s t u v w Component Description n Menu bar Access basic MioMore Desktop functionality. o My Maps Install and manage maps.
If you want to ... Then ... change your device preferences click the Device tab and change the following preferences for your Mio: z z z Device name (for display in MioMore Desktop) Language Voice Click Save to save your changes. change your language preferences for MioMore Desktop click the Desktop tab and select the desired option in the Desktop Language section. keep MioMore Desktop updated click the Desktop tab and select the Check for updates automatically checkbox.
How do I use the map screen? When using MioMore Desktop applications including Speed Cameras, EXPLORE, GO, FIND, MY PLACES and TRAVEL BOOKS, you will see a map screen displayed like below. p q n r o n Component Description Map Right-click anywhere on the map to show the following options: z z z z z Zoom in, Zoom out Centre map here Explore this area (See “Explore” on page 13 for details.) Set as From point, Set as To point (See “Go” on page 15 for details.
My Maps My Maps allows you to install new maps, update existing maps, remove maps from your Mio and purchase new maps. MioMore Desktop Æ My Maps n o Component Description n My Maps A list of maps stored on your computer and your Mio. You can sort maps by name, size or storage option. o Maps Library A list of maps available for purchase via the Mio e-shop website. You can sort maps by name, date or size. To purchase maps, click Buy Maps.
Note: Removing maps from your Mio does not remove maps from your computer. To delete the map data stored on your computer select the map and click at the bottom. Click Yes to confirm. Note: You can change the location of where downloaded maps and map updates will be saved. See “General preferences” on page 6 for details.
Speed Cameras Note: Safety camera information is only available for selected countries. Your Mio contains pre-loaded safety camera information. You can purchase the latest safety camera subscriptions on the Mio e-shop website and install onto your Mio via MioMore Desktop. MioMore Desktop Æ Speed Cameras n o Component Description n Speed Cameras A list of safety cameras stored on your computer and your Mio. You can sort locations by name or storage option.
From the menu bar click File Æ Import Æ Speed Cameras. 2. Navigate and select a file you want to transfer. 3. Click Open. The selected file is imported and listed in the Speed Cameras panel. 4. To transfer the safety camera onto your Mio, select the on device checkbox. Tip: You can also right-click an item and select Show on device to transfer the item to your Mio; select Show all on device to transfer multiple selected items at a time.
Explore Explore allows you to explore an area to find Points of Interest (POIs). MioMore Desktop Æ EXPLORE n Component n POIs o Description A list of POIs around the selected area. You can sort POIs by type or name. Note: A POIs saved as My Place is displayed in red colour. o Display area Display the selected POI on the map. How do I filter POIs on the map? The POIs panel always displays nearby POIs of all categories. You can sort POIs by type or name.
If you want to ... Then ... edit the POI notes click the notes field. Enter new notes or edit the existing notes. The POI notes are changed in both MioMore Desktop and your Mio. How do I import a POI onto my Mio? Note: You are only allowed to transfer a POI saved as My Place. 1. Select a POI to display the location summary pop-up. 2. Select Add to My Places to save the POI as My Place. The POI icon will become red. 3. From the location summary pop-up select Show on device.
Go Go allows you to pre-plan your trip and import the routes onto your Mio. MioMore Desktop Æ GO n o Component Description n Route planner Plan a route by entering From point and To point. A list of planned routes will display in the Pre-planned Routes section. o Display area Display the route on the map. Tip: You can also right-click on the map to set your From point and To point. How do I pre-plan a route? 1. To open the Go screen, click the GO button or File Æ New Æ Routes on the menu bar.
Avoidance Avoid Highways, Toll Roads or Ferries in your route. Note: The Mode and Route options settings will only apply to the route you are editing. 5. Click Plan to calculate your route. The route will be displayed on the map. 6. Click Save this route. The route is saved to the Pre-planned Routes section. How do I import a route onto my Mio? From the Pre-planned Routes section, select the on device checkbox next to the route, or right-click the route and select Show on device.
Find Find allows you to search for a location by keyword, address or postcode. MioMore Desktop Æ FIND n o Component Description n Find Search for a location by keyword, address or postcode. The search results will display below. You can sort the results by type or name. o Display area Display the selected location on the map. How do I find a location? You can find a location by keyword ( ), address ( ) or postcode ( ). 1.
My Places My Places allows you to view all places that you have saved on your Mio. My Places includes saved addresses, captured journeys and sound, Points of Interest, NavPix™, and other locations. You can select, modify and delete places. MioMore Desktop Æ MY PLACES n o Component Description n My Places A list of My Place items stored on your computer and your Mio. You can sort the items by type, name, date or storage option. o Display area Display the selected location on the map.
3. Your friend will receive the email with links to either save the image or to save the location as My Place in MioMore Desktop. If the location is a NavPix™ (or a geocoded picture), your friend will receive the image as an attachment to the email. If the location is a captured journey, your friend will receive the journey as a .KMZ file attached to the email. Your friend will need to have Google Earth installed on the computer to view the KMZ file.
My Mio Overview MioMore Desktop Æ MY MIO Æ Overview Note: The Overview screen is also the default front page when you start MioMore Desktop. When your Mio is connected to your computer, the Overview screen will display basic information about your Mio, including model name, map date, device settings, memory configuration (of both your Mio and memory card) and mileage report. You can change your Mio and MioMore Desktop preferences by clicking Preferences. (See “General preferences” on page 6 for details.
To start the update, click Download. When the download is complete, click Apply to apply the updates to your map or software. To update all items on the list, click Update all. Backup/Restore You can save backups of data from your Mio, and later restore it if required. MioMore Desktop Æ MY MIO Æ Backup/Restore How do I backup my Mio? 1. Enter a name for your backup if needed. 2. Select the data you would like to backup. 3. Click Backup.
Reinstallation MioMore Desktop Æ MY MIO Æ Reinstallation If you lost your license key, click Recover License Key to retrieve license key from the server. If you want to reinstall the Spirit software onto your Mio, click Reinstall Software. Follow the prompts to complete the process.
Music Music allows you to import music (.wav, .mp3, .wma) and video files onto your Mio. MioMore Desktop Æ MUSIC o n Component Description n Folders A list of folders containing playlists stored on your computer and your Mio. Click an item to display its contents in the display area. o Display area Displays music or video files from the selected folder. Click All music/All videos to view all music/video files in your MioMore Desktop library.
How do I transfer a music file from MioMore Desktop to my Mio? 1. From the display area select a music file. 2. Select the on device checkbox. The selected music file is transferred to your Mio. Tip: You can also right-click and select Show on device to transfer the file to your Mio. How do I remove a music file from my MioMore Desktop playlist? 1. From the Folders panel select a playlist to display its contents in the display area. 2. Select the file you want to remove.
If you want to ... Then ... rename a media file or playlist right-click the file and select Rename or Rename playlist to edit the name. play a media file from the display area double click the file you want to preview. Tip: You can also select the file and right-click Play.
Travel Books Note: Travel Books is not available on all models and is only available for selected countries. Travel Books is a collection of city guides that provide detailed Points of Interest maps for major cities in Europe. The city guides provide information on accommodation, dining, night life, business essentials, shopping, important tourist spots and practical information such as banks, medical centres, bus stations, etc. You can use MioMore Desktop to download Travel Books and import onto your Mio.
To reset your keyword click 5. . Select a POI to view its details in the display area.
Appendices For more information User Manuals The latest User Manuals can be downloaded from our website: www.mio.com Register your Mio with MioClub If you have a faulty product or you would like to speak to a member of our Technical Support team, register your Mio on MioClub to obtain the Technical Support phone numbers for your Mio and your region. Speed limit Mio products are designed to be used as an aid to safer driving.
Copyright © 2009 MiTAC International Corporation. Mio is a registered trademark of MiTAC International Corporation and is used under licence by Mio Technology NZ Ltd. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
