Moov V Series Hardware Manual
Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Home charger-specific safety information To charge your Mio from the mains power, use the home charger supplied by Mio as an accessory (may be sold separately). Using other home chargers with your Mio could result in serious injury or property damage. Never use the charger if the plug or cord is damaged. Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may cause electrical sparks or fires.
Contents Important safety information...................................................................................................................2 Home charger-specific safety information .........................................................................................3 About charging .............................................................................................................................3 About the charger ..................................................................
Welcome Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
Mounting your Mio in a vehicle CAUTION: Never mount your Mio where the driver’s field of vision is blocked. If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your Mio where there is a “clear area” - usually just beneath the rear-view mirror. To protect your Mio against sudden surges in current, connect the in-car charger only after the car engine has been started.
V700 Series 1 4 6 3 2 5 7 8 7
Mounting on the dashboard V700 Series 1 2 3 5 4 6 8 7 If you transfer the suction cup between vehicles, the adhesion could be reduced. To restore adhesion, please clean with water.
If you find it difficult to mount the suction cup to the dashboard, you can use the optional mounting plate to help with the mounting: 1 3 2 Installing the external antenna An external antenna may be supplied with your Mio for better signal reception. Connect the external antenna to the connector for external antenna on your Mio, then attach the antenna to the windshield (as shown in the diagram).
Installing the optional digital TV card 1. Open the TV card compartment cover as shown below. 2. Insert the digital TV card into the socket ( ), and then press down to lock the card into place ( If you need to remove the digital TV card, press the locking clips ( ( ). 3. Replace the compartment cover. 10 ).
Getting to know your Mio V500 Series Power switch Connector for in-car charger, USB cable, home charger (sold separately) and TMC accessory kit (may be sold separately) Antenna Slot for MicroSD memory card Slot for digital TV card (may be sold separately) Microphone Cradle slot Remote sensor Speaker Touch screen Connector for external antenna Main Menu button 11
V700 Series Power switch Microphone Antenna Battery indicator Slot for digital TV card (may be sold separately) Main Menu button Speaker Connector for in-car charger and home charger (sold separately) Cradle slot Connector for headphones and TMC accessory kit (may be sold separately) Connector for external antenna Slot for MicroSD memory card (underneath cover) Touch screen Connector for USB cable (underneath cover) Remote sensor 12
How do I turn on my Mio? Using the power switch To turn on your Mio, slide the power switch to the ON position. To turn off your Mio, slide the power switch to the OFF position, then tap Sleep. Your Mio will enter a suspended state. When you next turn it on, your Mio will return to the last screen that you used. To reset your Mio, slide the power switch to the RESET position.
How do I charge the battery? Your Mio has an internal battery that when fully charged, should provide power for up to 2 hours. The battery can take up to 4 hours to fully charge. The battery may not be fully charged when you use your Mio for the first time. CAUTION: For optimal performance of the battery, note the following: Do not charge the battery when the temperature is high (e.g. in direct sunlight). There is no need to fully discharge the battery before charging.
How do I insert a memory card? CAUTION: Do not apply pressure to the centre of the memory card. V500 Series V700 Series Hold the MicroSD card by the edges and gently insert it into the slot as shown in the above diagrams of your Mio. To remove a card, gently push the top edge of the card inwards to release it, then pull it out of the slot. Mio Technology does not guarantee the product’s compatibilities with the storage cards from all manufacturers.
How do I use the remote control? Installing the battery for the remote control 1. Remove the plastic film from the remote control. 2. Insert a small rod, such as a straightened paperclip, into the eject hole and push firmly ( battery holder ( ). 3. Place the battery in the battery holder. Be sure to have the + end of the battery face up. 4. Slide the battery holder back into place and make sure it clicks into position.
Name Description W／X Switches to the previous or next channel. RETURN Returns to the previous channel. Mute button Mutes or unmutes the sound. ENTER Press to confirm channel number choice. S／T Adjusts the volume. Main Menu button Returns to the Main Manu.
Other features How do I receive current traffic information? Traffic information is not available on all models and is only available in selected countries. You can receive current traffic information on your Mio using the Traffic Message Channel (TMC) service. The TMC service may require a subscription in some countries. See www.mio.com for details. Depending on your Mio model you may require a TMC accessory kit (may be sold separately).
Reference What is GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Mio, to determine an exact location.
Troubleshooting If you encounter a problem you cannot solve, contact an authorized service centre for assistance. Problems Solutions Power does not turn on when using battery power. The remaining battery power may be too low to operate your Mio. Charge the battery using the in-car charger, home charger (sold separately) or USB cable, then try again. Screen responds slowly. The remaining battery power may be too low to operate your Mio. If the problem still persists, reset your Mio. Screen freezes.
For more information Online support For 24/7 help and support with Mio products, visit our Technical Support website at: www.mio.com Register your Mio with MioClub If you have a faulty product or you would like to speak to a member of our Technical Support team, register your Mio on MioClub to obtain the Technical Support phone numbers for your region. Disclaimer Mio operates a policy of ongoing development.
IEC 60950-1:2001: Product Safety The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. Declaration of conformity Hereby, Mio Technology declares that this N236/N248 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The FM transmitter function is not allowed to use in Cyprus, France and Greece.
Moov V Series User Manual
Important Safety Information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Contents Important Safety Information ..................................................................................................................2 Welcome ................................................................................................................................................5 How do I use the touch screen? .............................................................................................................6 How do I get started? ........................................
Changing TV settings......................................................................................................................38 How do I play media?...........................................................................................................................39 Playing audio files ...........................................................................................................................39 How do I listen to a music file on my Mio? ....................................
Welcome Thank you for purchasing this Mio. This manual has been prepared to guide you through the operation of your Mio from first set-up through to continuous use. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
How do I use the touch screen? By default, your Mio starts in button mode, to scroll up or down, or dock/undock use the buttons to the right of the main page. You can change to Slide TouchTM mode: tap MY MIO Æ List Scrolling. In Slide TouchTM mode, your Mio touch screen options change dynamically: To see all options on a menu, drag the screen up or down. To display the next screen, tap an icon or select an option. To dock a menu to the left, tap the left edge of the menu.
How do I get started? The first time you use your Mio it may take several minutes to establish a GPS connection. How do I turn my Mio on for the first time? To get started for the first time, complete the following steps: 1. Read the Important Safety Information (see "Important Safety Information" on page 2). 2. Position your Mio in your vehicle. Follow the instructions in the Hardware User Manual.
Main Menu The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Mio, receive updated traffic information (not available on all models) and make and receive phone calls (not available on all models). To display the Main Menu, press on your Mio at any time. Search for places, areas and streets to help plan your route. Access your saved locations, NavPixTM, journeys, etc. Explore the area around your current position or destination.
How do I go from A-B? Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... need to search for an address tap FIND then Find a street address to search for the address.
How can I set my keyboard preference? From the Keyboard screen, tap . The Keyboard preference screen will display. How does predictive text (abc, def…) work? Predictive text allows addresses to be searched by a single key-press for each letter, as opposed to the multiple key-presses. As you enter a letter of an address, your Mio will compare all possible combinations against the maps you have installed and determine which address you intended to type. For example: To enter London, tap JKL MNO MNO DEF.
How do I plan my first trip? Using your Mio to plan your first trip is easy. There are several ways to select your destination. Complete the following to navigate to a street address that you know using the FIND address wizard. Æ Æ Æ Æ Æ Complete the following: If you want to ... Then ... calculate the route, open the Map screen and start navigating tap . The Map screen will display. save the location as Home . tap The Save screen will display. tap Save as Home.
How do I set my route preferences? You can enhance your navigation experience by modifying aspects of your route and route calculations. 1. From the MAP screen, tap the undock button and tap Route options. The Route options screen will display. OR Æ Æ Route options. The Route options screen will display. 2. Complete the following: If you want to ... Then ... set route type options for your route tap Route type. The Route type screen will display. select your route type preference form the list.
If you want to ... Then ... record a GPS log of your trip tap the GPS logging option to turn it On or Off. record your journey tap the Capture Journey option to turn it On or Off. How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. Æ Æ Æ Æ Æ Complete the following: If you want to ... Then ...
If you want to ... Then ... explore the area near the location tap . The Explore Map screen will display. tap the undock button or tap the docked menu in Slide TouchTM mode to see the menu options.
How do I view my route? When a route has been calculated, the Map screen will display. You will be directed to your destination by spoken and visual instructions. Tap anywhere on the Map screen to show all options. n v o p w qrst u Item Description n Direction and distance of next turn The direction and distance to your next turn. o Current route Your current route is highlighted. p Current position q Add waypoint to trip Tap to repeat the vocal instruction.
How do I use the Explore map? The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position. Tap and drag the map to explore your desired local area. Tap the map to display a POI Cluster showing POIs in the surrounding area. Tap a POI icon to show more information and navigate to the POI. Æ n p o n Item Description +, − To zoom in or out, tap and hold − or +.
If you want to ... Then ... The Map screen will display. screen and start navigating save the location as a favourite place a phone call to the POI . tap The Save screen will display. tap Save as My Place. tap . This feature is not available on all models. How do I find a POI on my route? Æ Æ Æ Æ Complete the following: If you want to ... Then ... calculate a new route, open the Map screen and start navigating tap . The Map screen will display.
How do I set my POI preferences? Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools. 1. From the Explore screen, tap the undock button or tap the docked menu in Slide TouchTM mode and tap Places settings. The Places settings screen will display.
How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview a route. 1. Select a departure point. If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) Æ The Find screen will display.
How do I view my route statistics? Your Mio provides information on your: distance to go estimated time of arrival distance travelled average speed maximum speed time taken for trip stationary time. To view your route statistics during a planned route: 1. Æ The Map screen will display. 2. Tap the undock button or tap the docked menu in Slide TouchTM mode to undock the menu screen. 3. Tap. The Route Statistics screen will display.
How do I navigate to a recent place? To make navigating to an address easier, your Mio will automatically save all your start locations and destinations in a list of recent places. 4. Æ The My Places screen will display. 5. Tap the undock button or tap the docked menu in Slide TouchTM mode to undock the menu screen. 6. Tap Recent places. The Recent Places screen will display. 7. Tap a recent place. The Preview screen will display. 8. Complete the following: If you want to ... Then ...
How do I find the nearest POIs? 1. Complete the following: If you want to ... Then ... search for the nearest petrol stations Æ search for the nearest emergency services Æ search for the nearest restaurants Æ search for the nearest tourist attractions Æ search for the nearest parking places Æ search for the nearest banks and ATMs Æ 2. A list of the selected POI category based upon your current location is displayed. 3. Tap the desired item from the list, then tap on the Preview screen.
My Places My Places has all your saved and captured locations. It also contains POIs, NavPixTM and albums you have downloaded onto your Mio via MioMore Desktop. How do I save a location as My Place or Home? 1. Search for an address until the Preview screen is displayed. 2. Tap Add to My Places. The Save screen will display. 3. Tap Save as My Place. The Preview screen will display. 4. Complete the following: If you want to ... Then ...
If you want to ... Then ... explore the area near the location add or edit location name delete the favourite location tap . The Explore Map screen will display. tap the undock button or tap the docked menu in Slide TouchTM mode to see the menu options. complete one of the following: o tap Streets to explore streets near your location o tap Areas to explore areas around your location o tap a POI category to explore POIs near your location tap Rename. The Keyboard screen will display.
3. Tap . Your Mio will calculate the route from your current location. The Map screen will display. How do I edit the name of a location in My Places? 1. Æ The My Places screen will display. 2. Select a location to edit. The Preview screen will display. 3. Tap Rename. The Keyboard screen will display. 4. After you have edited the name, tap OK. The Preview screen will display. How do I delete a saved location? 1. Æ The My Places screen will display. 2.
2. Tap the NavPixTM you want to navigate to. The NavPix Details screen will display. 3. Complete the following: If you want to ... Then ... calculate the route, open the Map screen and start navigating tap . The Map screen will display. view NavPixTM location on the map tap Show on map. The Explore Map screen will display. explore the area near the NavPixTM location tap . The Explore Map screen will display.
Item Description n Slide Show Displays all images in the album as a full-screen slideshow. o Album title The title of the album. Indicates that the picture is a NavPixTM, with embedded GPS co-ordinates. p NavPixTM thumbnail q A thumbnail of a NavPixTM contained in the album. To select a NavPixTM, tap the thumbnail. The NavPix Details screen will display. How do I view a NavPixTM in full-screen? 1. From the NavPix Details screen, tap the thumbnail of the NavPixTM.
How do I save a NavPixTM as a favourite? You cannot save a NavPixTM as a favourite if GPS co-ordinates are not available. 1. From the Album screen, tap a NavPixTM. The NavPix Details screen will display. 2. Tap . The Save screen will display. 3. Complete the following: If you want to ... Then ... TM save the NavPix as a Favourite save the NavPixTM as Home tap Save as My Place. The NavPixTM is saved and the NavPix Details screen will display. tap Save as Home.
How do I capture a location or a journey? The capture functionality is not available on all models. Your Mio has a capture feature which allows you to record GPS co-ordinates of a location, capture a location with a voice recording and capture a journey and save them so you can navigate back at a later time. How do I capture the GPS co-ordinates of my location? 1. Æ The Capture screen will display. 2. Tap Save. You will hear a shutter sound to indicate that the GPS co-ordinates have been saved.
How do I capture a journey? To enable capturing of journeys, you must first enable Capture Journey from Æ Route options. 1. At the beginning of the journey you would like to record, tap Clear. All travel that you have made (i) since midnight, (ii) the previous time you tapped Clear, or (iii) last captured a journey, will be deleted. 2. Travel on your journey. Your Mio will keep a record of where you travel. 3. At the end of your journey, Æ The Capture screen will display. 4. Tap .
How do I create a trip with multiple stops? You can use the Planned Trips screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. 1. Æ The Planned Trips screen will display. 2. Tap Create New Trip. The Edit screen will display. 3. Tap the location name. The Keyboard screen will display. 4. After you have edited the name, tap OK. The Edit screen will display. 5. Tap Add. The Add screen will display.
6. Tap Find a place. The Search screen will display. You can also add waypoints using Home, My Places and Recent places. 7. Using the Find address wizard, search for a location. The Preview screen will display. 8. Tap Add as waypoint. The waypoint is automatically saved and the Edit screen will display. 9. Complete one or more of the following: If you want to ... Then ... add another waypoint Waypoints added after a multi-stop trip has commenced will not be included in the current route.
If you want to ... Then ... navigate to your selected destination delete the trip tap Have this trip demonstrated tap Simulate. The Map screen will display your trip in demo mode. ( See Shop Demo page 58.) tap . The Map screen will display the calculated route. . How do I delete a waypoint from my trip? 1. Æ The Planned Trips screen will display. 2. Tap the trip to edit. 3. Tap a waypoint on Edit screen. The Preview screen will display. 4. Tap Delete. The Edit screen will display.
How do I edit a planned trip title? 1. Æ The Planned Trips screen will display. 2. Tap the trip to edit. 3. Tap the current trip title. The Keyboard screen will display. 4. After you have edited the name, tap OK. The Edit screen will display. How do I skip a waypoint during a multi-stop trip? 1. Tap the map screen. 2. . When the caution dialog box displays, tap Yes. Tap The next waypoint will be skipped and the route recalculated to the following waypoint.
What is Travel Book? Travel Book is not available on all models and is only available in selected countries. Travel Book is a collection of city guides that provide detailed Points of Interest maps for major cities in Europe. The city guides provide information on accommodation, dining, night life, business essentials, shopping, important tourist spots and practical information such as banks, medical centres, bus stations, etc. Travel Book information is provided by third party.
4. Complete the following: If you want to ... Then ... calculate the route, open the Map screen and start navigating tap . The Map screen will display. save the location as a favourite . tap The Save screen will display. tap Save as My Place. explore the area near the location tap . The Explore Map screen will display. tap the undock button or tap the docked menu in Slide TouchTM mode to see the menu options.
How do I watch digital TV? If an optional digital TV card is installed on your Mio, you can watch the local free-to-air digital TV programs. WARNING DO NOT watch TV while driving. It may be illegal in your state or country for a display showing a video to be in view of the driver. For information on installing the optional TV card and external antenna and using the remote control, refer to the Hardware User Manual. Watching TV programs Æ 1.
Changing TV settings Complete the following: If you want to ... Then ... check the one-week program guide provided by the local digital TV program providers tap Electric Program Guide. check the channel list tap Channel List. Select a date. The screen will show the program list of the selected channel. Tap a program to show the program information. Tap to switch to the selected channel. show the subtitle (if supported by the local digital TV program providers) tap Subtitle.
How do I play media? Media is not available for all models and is only available in selected countries. Media allows users to play stored media files installed on your Mio or on a memory card. Æ Playing audio files Only mp3, wma, wav audio formats are supported for the audio feature. If your files are on a memory card, insert the card into your Mio. You can play music files that are stored on your Mio or on a memory card by a random order, artist and albums.
If you want to ... Then ... listen to the previous music file tap . skip the current music file tap . pause the music file tap . Tap adjust the volume . tap mute the volume to starting playing the audio file. tap . unmute the volume tap . set play settings in the Play section, tap < or > to see all options: select Random to play music files randomly. select In Order to play music files in order.
If you want to ... Then ... pause the video file tap adjust the volume . Tap to start playing the video file. . tap mute the volume tap . unmute the volume tap . View the video file on full screen tap . set play settings in the Play section, tap < or > to see all options: set repeat settings select Random to play video files randomly. select In order to play video files in order.
If you want to ... Then ... return to the normal view tap set play settings in the Play section, tap < or > to see all options: set repeat settings . select Random to play video files randomly. select In order to play video files in order. in the Repeat section, tap < or > to see all options: select Repeat All to repeat all video files. select Repeat One and the current video file will be repeated once. select No Repeat to play the video files only once.
How do I receive audio through my vehicle speakers? FM transmitting is not available on all models and is only available in selected countries. Your Mio can be set to transmit sound at a particular FM frequency which you can then receive through your vehicle radio. This means that you can hear map voice guidance, radio, mp3 files and video voice files clearly and loudly through your vehicle speakers.
How do I receive current traffic information via TMC? Traffic information is not available on all models and is only available in selected countries. Your Mio can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location.
A message will display at the bottom of the screen with the road name, the section of road affected and the type of event that has occurred. The message remains on screen for 8 seconds and is added to the Event List. Traffic Overview screen Depending on your Mio model, traffic information may not be available, may require a subscription, or may require the Traffic Accessory Kit (may be sold separately).
From the Traffic Overview screen, tap and undock the menu. n o p q Item n Description Tap to return to the previous screen. o Sort Display the Set sort type screen. Select your traffic event sorting option from the list. p Event description Displays details of the Event, including: q Event icon Name of road and direction in which Event is taking place. Location of where Event begins and ends. > indicates an Event from a location, to a location.
n o p q Item n o Description Tap to return to the previous screen. Event icon and description Displays details of the Event, including: Name of road and direction in which Event is taking place. Location of where Event begins and ends. > indicates an Event from a location, to a location. <> indicates an Event between locations. Type of Event. p Detour information Displays details of detour recommendation, if any. q Avoid Tap to initiate a new route to avoid the event.
How do I cancel a detour around an event on my route? If you have chosen to avoid an event and a new route has been calculated, you can cancel the detour around the event and return to your original route. 1. From the Event List screen, tap the Event you want to un-avoid. The Event Details screen will display. 2. Re-route information displays at the bottom of the screen. If a re-route has been calculated, Unavoid is available; tap to accept the new route. The Map screen will display.
Traffic preferences You can view your current traffic system status and change options by customising the traffic preferences. TMC service 1. From the Traffic Events screen, tap Traffic service. The Traffic service screen will display. The TMC service screen displays the frequency of the radio station currently used to receive traffic event information. A bar shows the strength of the traffic signal being received; the more green bars the stronger the signal. 2.
If you want to… Then… sort events by age select the Age option. view all traffic events select the Show all events option. view traffic events that appear only on your route select the Only show events on my events option. Your preferences are automatically saved.
Walking mode Walking mode is not available on all models. Walking mode allows you to navigate to your destination using roads and paths appropriate for a pedestrian, including non-vehicle segments. When in Walking mode, you will not be routed onto motorways and their associated slip roads. If your destination is more than 10 kilometres (6.3 miles) away, a warning message is displayed indicating that the route is a long way to walk.
What can I customise? There are various customisation options available to enhance your navigation experience. Æ Volume Complete the following: If you want to ... Then ... increase or decrease the volume tap to move the Volume slider to the right to increase the volume. tap to move the Volume slider to the left to decrease the volume. Your preferences are automatically saved. Safety options You can enhance your navigation experience by modifying aspects of your route and route calculation.
Route options Complete the following: If you want to ... Then ... set route type options for your route Tap Route type. The Route type screen will display. Select your route type preference from the list. Shortest – The route with the shortest physical length Easiest – The simplest route with the least number of turns and favours motorways where appropriate Economical – The route with least number of stops, turns and urban areas which should save on fuel usage.
Map display Complete the following: If you want to ... enable/disable automatic zooming during navigation display North at the top of the 2D Map screen Then ... tap the Auto-zoom map when navigating option to turn it On or Off. If selected, the Map screens will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. tap the Keep North at top of 2D map screen option to turn it On or Off.
Your preferences are automatically saved. Language Complete the following: If you want to ... Then ... change the on-screen language tap your preferred language, then tap Yes. The voice scheme will also change to the default scheme for the selected language. Your preferences are automatically saved. Voice Complete the following: If you want to ... Then ... change the voice scheme select your preferred voice scheme from the list.
The Battery Status bar shows the percentage of power left in the Mio battery. The words External power will display when the battery is charging from an external power source. Otherwise it will show Internal battery when not connected to an external power source. To charge the battery, refer to the Hardware User Manual. Units Complete the following: If you want to ... Then ... change the time format tap Time format and then select your preferred time format from the Units screen.
List scrolling Complete the following: If you want to ... Then ... TM enable the Slide Touch interface and not use arrows to navigate on a screen tap the List Scrolling option to select Slide Touch. disable the Slide TouchTM interface and use the scroll tabs tap List scrolling option to select Buttons. Your preferences are automatically saved. Audio output This feature is not available on all models. Audio output allows you to change the audio output of your Mio.
Complete the following: If you want to ... Then ... delete My Places tap Delete My Places. delete recent locations tap Delete recent locations. clear all settings; for example, for use in a rental car complete all of the above. When the warning dialog box displays, tap Yes. Reset GPS Occasionally, the GPS fix may need to be reset.
Screen saver Complete the following: If you want to ... Then ... enable the screen saver feature on your Mio tap Screen saver. When your Mio is idle for 10/30/60 minutes, the screen saver will display. The screen saver will only display if your Mio is connected to a power supply. To stop the screensaver playing, simply tap the screen. Disable the screen saver feature on your Mio tap Screen saver. Tap Off. Your preferences are automatically saved.
Point of Interest categories Icon Description Icon Description Airport Amusement park Art centre ATM/Cash dispenser Bank Bar/Pub Beach Breakdown service/Car repair facility Bowling centre Business facility or company Business office Bus station Camping ground Car dealer/Automobile dealer Casino Cemetery Church Cinema City hall City, town or village Coffee shop College/University Community centre Commuter railway station Courthouse Dentist Doctor Embassy Exhibition centre Fer
Icon Description Icon Description Motoring organisation office Mountain pass Museum Music centre Natural attraction Nightlife Park and ride Parking Parking garage Park/Recreation area Performance art/Theater Petrol station Pharmacy Place of worship Police station Post office Public restroom/Toilet facilities Public sport airport Railway crossing Rental car agency Rest area Restaurant Road accident black spot Scenic/Panoramic views School School zone Shop Shopping Ski resort/S
Point of Interest categories by subscription Icon Description Safety Cameras Safety Camera (Mobile) Safety Camera (Average) Red Light Camera My Places categories Icon Description Album Home Picture Saved locations Captured locations Captured journey Captured sound recording 62
Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description Danger There is a dangerous situation on the route; for example, people are on the road. Traffic Any event that will cause a delay on a route. Weather Weather conditions are adversely affecting a route; for example, there is ice on the road.
Appendices For more information User Manuals The latest User Manuals can be downloaded from our website: www.mio.com Register with MioClub To report a faulty product or speak to a member of our Technical Support team, register your Mio on MioClub to obtain the Technical Support phone numbers for your region. Speed Limit Mio products are designed to be used as an aid to safer driving. Mio does not condone speeding or any other failure to comply with your local traffic laws.
Copyright © 2009 MiTAC International Corporation. Mio is a registered trademark of MiTAC International Corporation and is used under licence by Mio Technology Ltd. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
Moov V Series MioMore Desktop Manual
Contents Welcome ................................................................................................................................................4 What is MioMore Desktop? ....................................................................................................................5 How do I install MioMore Desktop onto my computer?......................................................................6 MioMore Desktop Menu ...............................................................
Connect ...............................................................................................................................................31 How do I search for a POI using Connect? .....................................................................................31 My Media .............................................................................................................................................33 Toolbar.....................................................................
Welcome Thank you for purchasing this MioMore Desktop software. Please read this manual carefully before using MioMore Desktop for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
What is MioMore Desktop? MioMore Desktop is a suite of tools you can use to access greater functionality and product information via your computer. MioMore Desktop allows you to: obtain software updates manage maps search online for local POIs manage custom POIs manage safety camera subscriptions report trip mileage transfer pictures to your Mio using Photo Album browse the Mio website for special offers.
How do I install MioMore Desktop onto my computer? Before you begin: Ensure that your computer meets the minimum system requirements for MioMore Desktop, especially: i. Ensure that Internet Explorer 6 or higher is installed on you computer before you install MioMore Desktop, even if it is not your default browser. ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install MioMore Desktop.
7. If prompted to update your Mio software, follow the on-screen prompts. You are now ready to use MioMore Desktop to install maps to your Mio.
MioMore Desktop Menu Depending on your Mio model, certain MioMore Desktop Menu options may not be available. n o p q r s t u v w Component Description n Mio Online Display the Mio website, Mio Store and other online features. o My Subscriptions Information on your current subscriptions, including safety camera subscriptions. p My Maps Install and manage maps. q Custom POIs Application that allows you to import custom POIs. r Photo Album Import and edit NavPixTM images.
w Component Description CONNECT Search for and add live POIs to My Places. MY MEDIA Application used to transfer media files from your computer to your Mio. General Preferences My Mio Æ Options Æ General Complete one of the following: If you want to ... keep MioMore Desktop updated Then ... select the Auto check for updates checkbox.
My Subscriptions Subscription information is not available on all models and is only available in selected countries. Your Mio contains pre-loaded subscriptions, such as safety camera and travel book information. MioMore Desktop Æ My Subscriptions For the latest subscription updates, visit: www.mio.com Safety Camera alerts can be set to enable a warning sound or visual warning when on your route. How do I purchase a subscription? 1. Select a type of subscription. A list of regions will display. 2.
How do I update subscriptions on my Mio? The My Mio section will display a list of subscriptions already installed on your Mio: Icon Description Red Expired subscriptions. Yellow Available subscriptions. Green right click to purchase a new subscription. right click to update and purchase new subscription. Active subscriptions. No updates are available for these subscriptions.
My Maps My Maps allows you to install new maps, remove maps from your Mio and purchase new maps. MioMore Desktop Æ My Maps Click View Installed Maps. p q n r o Component Description n Map Source A list of maps on the DVD or available for purchase via the Mio Store website. o My Mio A list of maps installed on your Mio. p Continent A drop down list of continents that have maps available for your Mio. q Zoom In / Zoom Out Click to zoom in or out of the globe.
The default Loadable Maps Location is the My Maps folder in your Documents folder. You can change the location from: My Mio Æ Options Æ My Maps How do I download a map update at a later time? 5. Click Close to close the Free Map Updates window. 6. When you are ready to download the map update, click My Maps. A list of available map updates will be displayed under Free to download in the Available Downloads section. 7. Select the map update that you would like to download, then click Yes.
4. Complete the following: If the map to be installed is ... Then ... yellow go to step 7. red the map needs to be activated via the Internet before it can be installed; continue to step 5. 5. If you connect to the Internet via a dial-up connection, connect to the Internet now. 6. Follow the prompts to activate your Map Product Key, including: 7. Enter the Map Product Key when prompted. Your computer will connect to the Internet and activate your Map Product Key.
My Maps Preferences My Mio Æ Options Æ My Maps Complete one of the following: If you want to ... Then ... change the location of where downloaded maps and map updates will be saved click Change. select a location for your maps. click Save or OK. The warning message will display and you will be prompted to confirm your action. Your maps are moved to the new location. prevent offer messages from displaying select the Suppress Free Map Offer messages check box.
Custom POIs Depending on your Mio model, some Custom POIs features may not be available. The Custom POIs (Points of Interest) application allows you to create or import your own POI files. These are called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Mio and can have audio as well as visual alerts associated with them.
4. Set Alert setting as required: If you want to... Then... enable a visual warning when a POI of this category is in close proximity select the Visual alert check box. select an icon to display on the map screens for POIs of this category Click Browse to select the icon file from your local or network drive. When you have located the icon file, select it and click Open. The icon file must be a bitmap (.bmp) graphic with a minimum size of 6x6 pixels and a maximum size of 32x32 pixels.
Photo Album Depending on your Mio model, certain Photo Album features may not be available. Photo Album is a MioMore Desktop application which allows you to copy, delete or move pictures or albums between the NavPixTM library on your Mio and the NavPixTM library on your computer. MioMore Desktop Æ Photo Album p n q o r s n Component Description Desktop albums Displays a list of all albums stored in the NavPixTM library on your computer.
Toolbar n o p q r s t u v The following options are available on the toolbar: Button Description n Create new album Click to create a new album in the NavPixTM library you are viewing. o Add to My Places Click to transfer NavPixTM to My Places. p Transfer to your Mio or If you are viewing NavPixTM in the NavPixTM library on your computer, this will display as Transfer to your Mio. Click to transfer the selected NavPixTM to your Mio.
How can I view and edit pictures or albums on my computer? If you want to ... Then.... rotate a picture to left select the picture from the Album display area. click Rotate left on the toolbar. rotate a picture to right select the picture from the Album display area. click Rotate Right on the toolbar. view the picture details select the picture from the Album display area. right-click and select View Details, or click View Details on the toolbar.
If you want to ... Then.... upload picture to the Flickr website in the Desktop albums section, select the album containing the NavPixTM you want to upload to the Flickr website. select the NavPixTM, right click and select Upload to Flickr. You need a Flickr account to upload NavPixTM. To create a Flickr account visit www.flickr.com. save a picture to your computer select the picture from the Album display area. right click and select Export to disk or click Export to disk on the toolbar.
Image Search Image Search is a MioMore Desktop application powered by Flickr™ allowing you to download photos and import them to Photo Album. You can then upload the photo to the Flickr website, transfer photos to your Mio, export pictures to Google Earth or search for other NavPixTM near the longitude and latitude of your NavPixTM. MioMore Desktop Æ Image Search How do I download NavPixTM from the internet? 1. In the Description field enter a search description for the image you are looking for. 2.
Application Gallery Application Gallery is a MioMore Desktop application that allows you to add, remove and rearrange applications on the Main Menu screen of your Mio. MioMore Desktop Æ Application Gallery How do I rearrange Main Menu applications on my Mio Main Menu? 1. Select any application from the Device Main Menu section. 2. Drag the application to the position that you would like it to appear on your Mio. 3. Click Save to Device. The order of the Main Menu screen is saved on your Mio.
My Places My Places is a MioMore Desktop application that allows you to use Google Maps™ to view all places that you have saved on your Mio. Make sure you have an active Internet connection for this feature. My Places includes saved addresses, captured journeys and sound, Points of Interest, NavPixTM, and other locations. You can select, modify and delete places. You can also add locations from Connect, Photo Album and Image Search to My Places.
If you want to ... edit the location notes Then ... click Edit notes. enter notes. The location notes is changed in both MioMore Desktop and your Mio. How do I share a location from My Places? 1. From the My Places panel select a location you want to edit. 2. Click the location icon on the Google map. The location summary pop-up will display. 3. Click . An email will open ready to send to your friends.
My Mio Voice transfer My Mio Æ Voice Transfer Voice Transfer is a MioMore Desktop application that allows you to install or remove voice files. Voice files take up space on your Mio’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Mio if required. How do I install a voice file? In the Available voice files section, select the voice file you would like to install, then click Install selected voices.
Mileage Reporter Mileage Reporter is not available for all models. Mileage Reporter is a MioMore Desktop feature that allows you to create expense reports (.csv format) based on the mileage and estimated fuel usage recorded by your Mio. My Mio Æ Mileage Reporter n p o q Element Description n Timeframe specifies the time for which the mileage report will be created. o Report panel Displays your trip log data.
How do I export a mileage report? 1. Select a trip log from the Report panel section. 2. Click Export report. The Open dialog box will open. 3. Select the file from your local or network drive, enter a name for your mileage report, then click Save. The mileage report is saved in .csv format. How do I delete travel logs from my Mio? 1. Select a trip log from the Report panel section. 2. Click Clear from your Mio. 3. Click Yes to delete all travel logs.
Backup and Restore You can save backups of data from your Mio, and later restore it if required. My Mio Æ Backup and Restore How do I backup my Mio? 1. Click Create new backup. 2. Select the data you would like to backup. IMPORTANT: NavPixTM, sound and video files will not be backed up. 3. Click OK. The backup will be saved to your computer. The backup will be listed on the Backup & Restore window. How do I restore a backup to my Mio? 1.
My Mio Æ Language Simply select your preferred language. Recover keys Make sure you have an active Internet connection for this feature. In case you lose the license files for your Mio, you can recover them using this feature. Use this feature before you re-install the maps. My Mio Æ Recover keys Follow the prompts to complete the process.
Connect Connect is not available for all models. Connect is a MioMore Desktop application that allows you to search and install local POIs information from your computer to your Mio. POI locations will be shown in My Places. Before you begin, ensure your Mio is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into − on the bottom of your Mio.
8. Click next to the POI you want to install to your Mio. The POI will be added to My Places. 9. Repeat step 8 to install more POIs to your Mio.
My Media My Media is not available for all models. My Media is a MioMore Desktop application allowing you to import music (.wav, .mp3, .wma) and video files from your computer to your Mio. Before you begin, ensure your Mio is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into on the side of your Mio.
Toolbar n o p q r s The following options are available on the toolbar: Button Description n Import media to library Imports the selected music files from your computer to the music library in MioMore Desktop. o Transfer to your Mio or If you are viewing the music library in MioMore Desktop on your computer, this will display as Transfer to your Mio. Click to transfer the selected music files to your Mio.
How do I remove a music file from my MioMore Desktop playlist? 1. From the display area select a music file by selecting the checkbox next to it. 2. Click Remove marked from list. The selected file is removed from your MioMore Desktop playlist. 3. Repeat steps 1 and 2 to remove additional music files to your Mio. You can select multiple files to remove them from the playlist. Removing music files from the playlist will not delete the music files from your computer.
If you want to ... Then ... preview a media file from the Music display area, select a music file you want to preview. to play the music file to pause the music file to stop the music file to forward the music file to rewind the music file rate a music file from Music display area, select a music file you want to rate. right click and select Rating to rate the file.
Appendices For more information User Manuals The latest User Manuals can be downloaded from our website: www.mio.com Register your Mio with MioClub If you have a faulty product or you would like to speak to a member of our Technical Support team, register your Mio on MioClub to obtain the Technical Support phone numbers for your Mio and your region.
Compliance The software is based in part on the work of the Independent JPEG Group. The software application uses a modified version of the Minimal XML Library, Flickr Library and Python Library. The libraries and thier use are covered by the GNU Lesser General Public License (www.gnu.org/licenses/lgpl.html). The modified source code is available from the following URLs: Minimal XML Library: http://download.mio.com/opensource/gnu/mxml.zip Flickr Library: http://download.mio.
Copyright © 2009 MiTAC International Corporation. Mio is a registered trademark of MiTAC International Corporation and is used under licence by Mio Technology NZ Ltd. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
