Hardware manual
16
How do I use the remote control?
Installing the battery for the remote control
1. Remove the plastic film from the remote control.
2. Insert a small rod, such as a straightened paperclip, into the eject hole and push firmly (
) and pull out the
battery holder (
).
3. Place the battery in the battery holder. Be sure to have the + end of the battery face up.
4. Slide the battery holder back into place and make sure it clicks into position.
CAUTION:
Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
Use only the correct type of battery.
When not using the battery for a long period (more than one month), remove to prevent damage from battery
corrosion.
In case the battery leaks, clean the liquid and install a new battery.
Check the regulations of your local government for proper battery disposal.
Remote control buttons
Name Description
GPS button Returns to the Map screen of the navigation program. (The TV feature will be turned off if it
is on.)
TV button Turns on the TV feature.
Numeric
keypad
Enters a channel number.
MODE Switches the display to full screen or 4:3 mode.