Mio Moov DR03 MiVue 128
Index 01 Table of Contents .................................................................................. 02 Product Features and Specifications .............................................. 03 Caution Note ............................................................................................ 04 Product Overview .................................................................................. 05 Getting Started .....................................................................................
01 Product Description DR-03’s lightweight stature surpasses all similar products available on the market, allowing for easy installation in your car, bicycle or motorcycle to keep a record of your journey; it can also be installed in your house to be used for home security. In addition to having outdoor recording and GPS functions, DR-03 is also combined with a map, keeping a faithful record of your life.
02 Product Features and Specifications ► VGA (640×480) with 300,000 pixels ► MPEG-4 A/V encoding; AVI format output; VGA with 30FPS ► Storage: MicroSD card (Class6 or above suggested) with a maximum support of 32G ► Built-in high resolution CMOS lens; enhanced night vision effects ► Camera view angle: 82 degrees ► Built-in microphone ► Uses 2 AAA batteries or car charger ► Automatic overwrite function, allowing loop recording ► Supports audio recording ► Provides two recording modes: Starts recording afte
Product Features and Specifications Car recorder host Dimension Weight Storage 98 x 34 28mm 640x480 (VGA) 47.5g Sensor Size 1/4” MicroSD Image Transfer Rate(Max) VGA, CIF, QCIF, QQCIF －30 fps． GPS Module GPS Chipset SiRF Star III Frequency L1, 1575.
03 Caution Note 1. GPS Accuracy The Global Positioning System (GPS) technology is developed and managed by the U.S. Department of Defense. Based on policy or national security considerations, the U.S. has the right to adjust the positioning accuracy of this system without prior announcement. Users must consider the surrounding environment and judge when it is appropriate to use this system in order to maintain personal safety. 2.
Caution Note 5. Memory Condition (If File Overwrite is not checked, the device will beep) When the memory card capacity has less than 175MB remaining, the recording indicator will flash quickly and the buzzer will beep three times every two minutes until the memory card only has 1MB left, then the system will force itself to shut down.
04 Product Overview - Top View - Low power indicator - Bottom View - Screw hole for holder Recording indicator GPS indicator Battery cover GPS Satellite Signal Reception (Frame) DC Jack Microphone 07
Product Overview - Front View - - Back View Power/function Button Camera lens - Left View Buzzer 08 MicroSD card Socket
05 Getting Started-Setup 1. Installation mode for car use 1. Please use Class6 or higher class MicroSD cards. 2. Combine the holder with device. ※Please format your MicroSD card with Mio Manager PC Suite before inserting it.
Getting Started-Setup 3. Combine the holder with the mounting frame and attach it to the windshield. 10 4. Start the car engine. 5. Plug the DC jack of the car adaptor into the main device and the other end to the car’s cigarette lighter.
Getting Started-Setup 6. Adjust the setting angle to get the best view. ※Please do not insert or remove Micro SD card, when MiVue 128 is operating.
Getting Started-Setup 2. Installation mode for bicycle use 1. Please use Class6 or higher class MicroSD cards. 2. Use your fingertip to push the battery cover towards the direction which the word PUSH indicates to easily open the battery cover. ※Please format your MicroSD card with Mio Manager PC Suite before inserting it.
Getting Started-Setup 3. Insert two AAA batteries according to the directions indicated. 4. Attach the holder onto the bottom of the device.
Getting Started-Setup 5.Pull the silicon holder down from front to back to wrap it around the device. (you can decide whether to use the silicon holder or not) 14 6.Use the hand screw to tighten and firmly hold the bottom holder and the device in place.
Getting Started-Setup 7.Combine the bicycle holder with the device with the bottom holder attached. 8.Loosen the screw, then select a suitable latch height and attach it to the bicycle, then tighten the screw again.
Getting Started-Setup 9. Adjust the setting angle to get the best view. ※Please format your MicroSD card with Mio Manager PC Suite before inserting it.
Getting Started-Operating 1. Activating Recording Function A. Automatic Recording Mode (GPS positioning completes direct recording) 1) First insert the formatted memory card, then press the power/function button; the indicator will light up sequentially and the device will complete start up in approximately 1 second. 2) Then, the GPS indicator will flash continually with 0.5 second intervals, at this time it has not yet entered recording status.
Getting Started-Operating B. Manual Recording Mode (Force recording before the GPS has completed positioning) 1) First insert the formatted memory card, then press the power/function button; the indicator will light up sequentially and the device will complete start up in approximately 1 second. 2) Then, the GPS indicator will flash continually with 0.5 second intervals, at this time it has not yet entered recording status.
Getting Started-Operating 2. Powering Off When the system is in automatic or manual recording mode, or before it started recording, press and hold the power/function button for 3 seconds and then release to power off the device.
Getting Started-Application Software 1. Installation of application software 1. Insert the CD-ROM into your computer. 2. The system will automatically pop up the setup window or you can also double-click on “Setup.exe” from the CD-ROM drive.
Getting Started-Application Software 3. Click “Next” to continue installation. 4. When the application software is finished installing, the corresponding shortcut icon will appear on the desktop.
Getting Started-Application Software 5. Remove the used MicroSD card from the device and connect it to the computer. 6. Double-click the icon 22 on the desktop to run the application program.
Getting Started-Application Software 7. Select the language you wish to use. 8. Click the first icon to open the recording files stored on the MicroSD card. 9. The information of the opened video file will be displayed in this field. 10. Click the Play icon to start the video playback.
Getting Started-Application Software 11. When the video is playing, the corresponding geographical location will also be marked on the map at the right side of the software. Click the icon at the top-right corner of the screen to enlarge the map. 12. When the video is playing, the speed, distance, time, longitude, latitude, altitude and direction information will be displayed here as well. 13. Click on the time bar to select the part you want to play. 24 14.
Getting Started-System Setup 1. Remove the MicroSD card from the device and connect it with the computer, then execute the software. 2. Click on the tools icon to open the System Setup window.
Getting Started-Application Software Format Time zone File overwrite Disable warning The SD card must first be formatted using this function when used for the first time and before changing the previous settings! Different time zones can be set according to different countries. If the MicroSD card’s capacity is full, the device will automatically overwrite older files. Disables the memory capacity full and low power warnings. On-screen display Displays the speed on the screen.
06 Appendix-Troubleshooting This chapter will list some of the problems you might face when using this device and their solutions. Even if the following guide can not solve your problem, please do not dismantle this device on your own! Please send the product back to the store where you purchased it for maintenance. Question Solution Power indicator does not light up 1. Install new batteries. 2. Unplug the car adaptor and reinsert it.
Appendix-Package Contents Mio DVR x 1 Spill-resistant cover x 1 (Class:54) Mounting frame x 1 (For car use) Mounting frame x 1 (for bicycle use) Holder for car x 1 Holder for bicycle x 1 Quick Start Guide Mio Moov DR-03 U s e r m a n u a l Mio Moov DR-03 28 Car adapter x 1 Application software CD-ROM x 1 User manual x 1 Quick Start Guide x 1
Appendix-Safety Precautions 1. Please turn off the power when inserting or removing the MicroSD card, or else it could cause damage to the device or the MicroSD card. 2. This device is a very sophisticated product; please avoid dropping it or expose it to strong shaking or vibrations. 3. Please avoid placing this device at locations with high humidity or could be splashed by liquids. 4. The device casing is made with plastic; please avoid contact with sharp objects to avoid damages. 5.
