Mio N548 Driving Recorder
Revision: R00 (11/2019) Disclaimer The screenshots in this manual may differ between different operating systems and software versions. You are recommended to download the latest User Manual of your product from Mio website (www.mio.com). Specifications and documents are subject to change without notice. MiTAC does not warrant this document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the device and the documents.
Table of Contents Getting to know your dash cam............................................................................. 4 Rear camera.................................................................................................... 4 Power button.................................................................................................... 5 Event button..................................................................................................... 5 LED indicators..........................
System settings................................................................................................... 20 MiVue Manager................................................................................................... 25 Installing MiVue Manager............................................................................... 25 Playing the recording files.............................................................................. 25 For more information..........................................
Getting to know your dash cam 1 2 3 4 5 Power button Device mount socket Mini-USB connector Shutdown button LCD screen 6 7 8 9 10 Microphone System indicator Event button Memory card slot Parking indicator 11 Speaker 12 Camera lens 13 Function keys Rear camera Depending on your model, your device may support a rear camera (may be sold separately).
Power button l l Press and hold for 2 seconds to manually turn the dash cam on and off. When the dash cam is turned on, press to switch the LCD screen on and off. Event button Press to manually start an event recording. LED indicators l System indicator Glows in green when the dash cam is charging. During charging, the LED flashes in green and amber alternately while the recording is in progress. l Parking indicator Flashes in red when Parking recording is in progress.
Using your dash cam in a vehicle Note: l To ensure the highest quality recordings, you are advised to place the dash cam near the rear view mirror. l Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. l If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your device where there is a “clear area.
2. Mount the rear camera (optional). Note: l Before sticking the mounting pad, you are recommended to clean the windscreen with rubbing alcohol. l If the adhesion of the adhesive tape does not perform well, replace the tape with a new one. 3. Adjust the lens angle. When adjusting the angle of mounting, make sure that the camera’s view is parallel with the level ground and the ground/sky ratio is close to 6/4. 4. Connect the cables.
MiVue dash cam Y cable Rear camera cable MiVue rear camera 3 Car charger 1 2 8
Inserting a memory card You must insert a memory card (not supplied) before you can start recording. The dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity. Hold the card by the edges and gently insert it into the slot as shown in the illustration. To remove a card, gently push the top edge of the card inwards to release it and pull it out of the slot. Note: l DO NOT apply pressure to the centre of the memory card.
Connecting to your computer You can connect the dash cam to your computer to access data on the memory card. Follow the instruction below to connect the dash cam to the computer via the USB cable (not supplied).
Operating basics Turning the dash cam on Complete the installation according to the instructions in the “Using your dash cam in a vehicle” section. Once the vehicle engine is started, the dash cam automatically turns on. Restarting the dash cam Occasionally, you may need to perform a hardware reset when the dash cam stops responding or if it appears to be “frozen” or unresponsive.
Function keys The device provides four function keys to control the corresponding icons displayed on the LCD screen. The keys' functions may vary on different screens.
Setting the date and time To make sure that the date and time of your recordings are correct, check the settings before you begin recording. 1. Press to access the Settings Menu. 2. Select System > Date/Time. 3. Select Use GPS time or Manual: l l When you select Use GPS time, press / to select the time zone of your location. The system will set date and time according to the GPS location.
The next time you use your smartphone to connect to the dash cam, you will not be prompted to enter the password again unless you reset your phone to the factory default settings. Note: The instructions about operating the smartphone are for reference only. The actual setting options and methods may vary depending on your phone type/model. 4. You can check the WIFI connection status by the WIFI icon on the dash cam. The dash cam is connected to the smartphone and paired with the MiVue app.
Event recording By default, if an event happens such as a sudden impact, high speed driving, an aggressive turn or an accidental crash during continuous recording, the G sensor will prompt the dash cam to start recording the event. Note: You can change the sensitivity level of the G sensor by selecting G-Sensor Sensitivity. > Video Recording > If you want to manually start an event recording while continuous recording is in progress, press the Event button on the device.
Note: The feature is triggered by the G sensor of the device. You can change the configuration by selecting > Parking Mode > Auto Entry. l Press to manually start Parking mode while continuous recording is in progress. To stop Parking mode and resume continuous recording, press . If movements are detected and recorded during Parking mode, you will be asked to playback the video when you stop Parking mode. The parking recordings can be found in the “Parking” category for file playback.
viewing photos, press l Press l Press l l l l l / to display the previous/next photo. to return to the list. to display the pop-up menu to select: Play/Pause: Starts or pauses the playback. Play rear video: The "D" icon displayed on the thumbnail on the playlist indicates that the video comes with a corresponding rear video. While playing the front video, you can use this option to switch to the rear video. Move to Event: Moves the file to the “Event” category.
Safety camera alerts Caution: For legal reasons, the safety camera function is not available in all countries. You can receive alerts to warn you about the locations of safety (speed) cameras which will enable you to monitor your speed through these areas. When a safety camera appears and is positioned in the detectable direction, you will receive alerts. The screen will display the visual alert and you will also receive audio warnings.
Adding a safety camera Note: You can add a custom safety camera only when a GPS fix is established. Your dash cam allows you to customise the safety camera database. You can add up to 100 custom safety cameras in your dash cam. Follow the steps to configure a custom safety camera: 1. To add a custom safety camera in the current location, press recording screen. on the 2. The next time when you pass by the location, you will receive alerts by the dash cam. 3.
System settings To customise the system settings, press . Note: Depending on your MiVue model, certain setting options may not be available. l File Playback Plays the recorded videos and photos. l Camera Press to enter Camera mode. l WIFI Enables or disables WIFI. The default setting is Off. See the "Setting up a WIFI connection" section to learn how to connect the dash cam to your smartphone. l Sound Recording l TPMS Sets if you want to include sounds in the recordings.
l Learning Mode: This option allows the dash cam to detect the TPMS sensors manually. You will need to do this only when you install or replace new sensors. Note: For more information on installing and using TPMS, see the documentation that comes with the product. l Driving Safety The dash cam provides advanced driving safety functions to make your driving safer. l Calibration: Follow the steps to calibrate the system. 1. Drive the vehicle in the middle of the lane. 2.
l l Stop and Go: The default setting is Off. Once enabled, the system will alert you when the car ahead has proceeded to go after being stopped for longer than 10 seconds. SafetyCam Sets how you want to be notified of safety cameras. The available settings include: l l l l l l l Alert Sound: The options are Beep, Voice and Mute. Alert Distance: The system will alert you at a preset distance (Short, Medium and Long) when a safety camera is detected.
l l l G-Sensor Sensitivity: Sets the sensitivity level (Low, Medium or High) of the G sensor that allows automatic triggering of the parking recording when the dash cam is in Parking mode. LED Indicator: The options are On and Off. Video Recording Changes the settings of recording, including: l l l l l l l l Video Clip Length: Sets the length of each video clip for a continuous recording (1 min, 3 min or 5 min). Video Resolution: Sets the resolution of the video.
l l System Sound: Enables or disables system notification sounds. l Welcome Sound: Enables or disables the notification sounds during start-up. l Volume: Adjusts the volume level. l LCD Standby: Selects Always On to keep the LCD on; or sets the timer for the LCD to turn off automatically (10 sec, 1 min or 3 min) after recording starts. Selecting Standby will turn off the LCD (in specified time) but still display the time and speed information. l Language: Sets the language.
MiVue Manager MiVue Manager™ is a tool for you to view the videos recorded on a MiVue dash cam. Note: Not all features are available for every model. Installing MiVue Manager Download MiVue Manager from the Support page of our website (www.mio.com/ support) and follow the on-screen prompts to install it. Make sure to download the correct software version (Windows or Mac) according to your computer's operating system. Playing the recording files 1.
1 Skips to the previous / next file on the list. 2 Starts or pauses the playback. 3 Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x. 4 Mutes or unmutes the volume. 5 Adjusts the volume level. 6 Plays the video in full screen. 7 Displays the playback progress. You can click on a point along the track bar to move directly to a different location for the playback. 5.
5 Opens the Settings Menu. The Settings items are described as follows: l Change Language: Sets the display language of MiVue Manager. l Change Skin: Sets the colour scheme of MiVue Manager. l l Check for Update: Checks if there is any new version of MiVue Manager. (Internet access is required for this feature.) About: Displays the version and copyright information of MiVue Manager. 6 Exports the GPS information of the selected file in the KML format to the specified location on your computer.
For more information For regulatory identification purposes, the device is assigned a model number of N548. Precautions and notices l l l l l For your own safety, do not operate the controls of the product while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage.
l l l l l l l completely before use. The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen.
Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. l Do not use the charger if the cord becomes damaged. l Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery l CAUTION! This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals.
l The GPS positioning data is for reference only. Federal Communication Commission Interference Statement For regulatory identification purposes, your device is assigned a model number of N548. FCC ID: P4Q-N548 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
