User's Manual

13
Setting the date and time
To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date/Time.
3. Select Use GPS time or Manual:
l
When you select Use GPS time, press / to select the time zone
of your location. The system will set date and time according to the GPS
location.
l
When you select Manual, the system will display the date and time setting
screen. Use
/ to adjust the value of the selected eld; press
and repeat the step until all elds have been changed.
4. When done, press .
Setting up a WIFI connection
The WIFI function allows you to connect the dash cam to your smartphone. The
WIFI function is disabled by default. You can manually enable WIFI by selecting
> WIFI > On. Once enabled, the WIFI setting screen displays the SSID and
password of the dash cam.
Follow the steps below to build the wireless connection between the dash cam and
your smartphone:
1. Enable the wireless function of the smartphone.
2. The smartphone will automatically scan for available wireless devices. Tap the
wireless setting to display the detected devices.
3. From the list, select the dash cam's SSID (MiVue-xxxx) and enter the password
(xxxxxxxxxx). When done, tap Connect.