User's Manual

21
l
Learning Mode: This option allows the dash cam to detect the TPMS sensors
manually. You will need to do this only when you install or replace new sensors.
Note: For more information on installing and using TPMS, see the documentation that comes
with the product.
l
Driving Safety
The dash cam provides advanced driving safety functions to make your driving
safer.
l
Calibration: Follow the steps to calibrate the system.
1. Drive the vehicle in the middle of the lane.
2. Ask a passenger to select the option and then follow the on-screen
instructions to complete calibration.
You are advised to calibrate the system constantly in order to be alerted
properly.
l
LDWS: Select Beep or Voice to enable the LDWS (Lane Departure Warning
System) function. The system will alert you when it detects that the car speed
is over 60 km/h and the car has strayed from its intended lane.
l
Headlight Reminder: The default setting is Off. Once enabled, the system
will remind you to turn the lights on when you are driving after dark.
l
Driver Fatigue Alert: The default setting is Off. Once enabled, the system
will remind you to take a break for a long-distance drive (2 hours, 3 hours or
4 hours).
l
Eco Drive Indicator: The default setting is Off. Once enabled, the system will
display the Eco drive indicator on the screen. The colour of the indicator will
change (red, yellow or green) depending on your driving status to remind you to
drive more efciently.
l
FCWS: Select Beep or Voice to enable the FCWS (Forward Collision Warning
System) function. The system will alert you when the car moves slowly and
gets too close to the car ahead.