User manual

7
How do I get started?
The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more
information about GPS, refer to the GPS Frequently Asked Questions
guide on the enclosed DVD.
How do I turn my Navman on for the first time?
To get started for the first time, complete the following steps:
1. Read the Important Safety Information on page 2.
2. Position your Navman in your vehicle.
Follow the instructions in the Hardware User Manual.
CAUTION: Ensure that your Navman does not obstruct the driver's view, or interfere with the operation of the
vehicle airbags and safety devices.
3. Turn your Navman on
Your Navman will turn on and display the Language screen.
4. Select your preferred language
From the Select Language screen, tap your preferred language.
 To prevent the Select Language screen from displaying on each start-up, tap the Show this screen on
start-up option to deselect it.
 You can change your preferred language while using your Navman, see "Language" on page 66.
5. Read the warning message
a) The Safety Agreement screen will display after you have selected your preferred language.
Read the Safety Agreement message.
b) To confirm that you have read and understood the message, tap Accept.
The Tutorial will display.
6. View the Tutorial
 To skip the Tutorial screens, tap Skip.
 To move forward through the Tutorial screens, tap Next.
 To view the previous screen, tap
.
To prevent the Tutorial from displaying on each start-up, tap the Show on start-up option to deselect it.
When you have finished the Tutorial, the Map screen will display. If you have a GPS fix, your current location will be
displayed on the map.