DigiWalker User Manual P350 P550

4.8.2 TMC control centre
This screen shows the selected TMC source and allows you to change the TMC
settings.
4.8.2.1 Selected FM radio station
The name and frequency of the selected radio station will appear at the top of this
window, together with signal strength information indicated by a bar similar to the
GPS satellite signal strength bars on the GPS Data screen.
If there aren’t any radio stations broadcasting TMC data in your area, the receiver
keeps on searching. You will see the frequency continuously sweeping across the
FM CCIR radio band (87.5-108 MHz). When you move to an area with TMC
information, the indicator will show the frequency, and detailed information for the
TMC station.
4.8.2.2 Exclude selected station
If you wish to receive TMC data from another radio station, push this button. The
radio station will be added to the list of excluded stations, Mio Map will start
searching for another TMC station, and will always skip the excluded station in the
future.
4.8.2.3 Show excluded stations
This button opens the list of excluded radio stations. Tap any of the stations in the
list, then tap Enable to allow Mio Map to accept TMC information from this station.
4.8.2.4 Sort events by distance / type
The list of traffic events can be ordered by their distance from the current position, or
by their type. Tap this button to toggle between the two possibilities.
61