User manual
Table Of Contents
- Table of contents
- Important safety information
- Getting to know your Mio
- Mounting and charging your Mio in a vehicle
- Turning your Mio ON and OFF
- Navigating on the screen
- Inserting a memory card
- How do I connect the device to my computer?
- Navigating through the screens
- Navigation
- Customising the system settings
- What is MioMore Desktop?
- Reference
10
Turning your Mio ON and OFF
Note: The battery may not be fully charged when you use your device for the rst time.
When charging the battery for the very rst time, you should charge it for at least
6 hours with your device turned OFF.
● For the initial start-up, press and hold the power button for 2 seconds to turn
on your device.
2 SEC
When you turn on your device for the rst time, follow the prompts to customise
your device.
Note: The rst time you use your Mio, it may take several minutes to establish a GPS connection. When
you have a GPS x, you can start to use your Mio to plan your trip.
Note: Depending on your Mio model, you may need to enter a Startup Key (which is printed on the side of
the box) and then tap OK to unlock the device. You will only have to do this the rst time you use your Mio.
It is recommended that you keep a copy of the Startup Key in a safe place.
● For normal operation, turn off the device by briey pressing the power button.
Your Mio will enter a suspended state. When you next briey press the power
button, your Mio will return to the Main Menu.
● To turn off your Mio, press and hold the power button for 5 seconds.
5 SEC
Resetting the device
Occasionally, you may need to perform a hardware reset when your Mio stops
responding; or appears to be “frozen” or “locked-up.” Insert a small rod, such as a
straightened paperclip, into the reset button of your device.