Operation Manual

19
How do I preview a route?
Route demonstration allows you to:
 Preview a route.
 Plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview a route.
1. Select a departure point.
If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route
to start elsewhere.
a)
Æ
The
Find screen will display.
b) Tap the undock button or tap the docked menu in Slide Touch
TM
mode to undock the menu screen.
c) Scroll down and tap Leaving from.
The
Leaving from… screen will display.
d) Tap
Find a place, then use the Address Wizard to find your departure point.
2. Select a destination point using the FIND address wizard, the My Places menu or the Explore map.
3. From the
Preview screen, tap .
Your route is calculated and the
Map screen will display.
4. Tap the undock button or the edge of the docked menu.
The
GO screen will display.
5. Tap
Route simulation.
The
Map screen will display the calculated route in route simulation mode.
6. Complete the following:
If you want to ... Then ...
increase the speed of the simulation
tap .
decrease the speed of the simulation
tap
.
pause the simulation
tap
.
cancel the simulation
tap
.