Instruction Manual


Connect phone
350 Lumens
Wave induction
USB charging
Phone Music
Lumen:350 lumen
Runtime:2.5-3.5hours
Working time:2.5-3.5 hours
Charging time:3 hours
Built-in polymer 1200mah battery(included)
Instruction manual
COB LED
Power indicator
light
Induction zone
Induction indicator
light
Connect indicator
light
Switch
Induction & BT key
Induction & BT key
Switch
Click: COB 100% Press two: COB 40% Press three: Flash
Press: Induction on Long press: Connect to Bluetooth
Connect phone
1.Long press connect the phone;
2.Wave your hand in the sensing area. Answer the phone;
3.Wave your hand in the sensing area two times, hang up the phone;
4.Turn off the headlamp and the phone will be automatically
disconnected after 5 minutes.
350 lumen
Wave induction
Charging time:2.5h
Impact Resistance
USB charging
Running time:2.5h
Connect phone
COB & LED
ATTENTION
Use A USB output device with stable supply at least DC5V0.5 A.
Please do not charge in direct sunlight or in a high temperature
environment over 50 degrees.
Please do not cover the fuselage with cloth during charging to avoid fire.
If there is a burning odor or smoke during charging, remove the
USB cable immediately.
This product is simple waterproof specification, please do not use in heavy rain.
Please do not look directly into the LED light, and do not shine into the eyes
of humans and animals.
When the product is stained with oil or grease, please wipe it with a soft cloth.
In case of obvious stains, use diluted neutral detergent to wipe and then dry
with a cloth, leaving no moisture.
If you do not use it for a long time (more than 6 months), please fully charge
it before use.
In order to maintain storage capacity, please fully charge once every 3 months.
Please keep away from high temperature and humidity.
ALL PERSPECTIVES