User's Manual

Personal Wireless Public Address System

Standard USB port storage position

Remove the protective cap

Pull out the USB port to a 90 degree angle

Insert a Type-A USB disk (USB 2.0 interface)

Push back the USB port into the standard position to prevent

accidental issues.

USB DRIVE OPERATION:

NOTE: SD Card has playing priority over USB if both audio devices are plugged-in.

OPERATING INSTRUCTIONS:

TRANSMITTER MICROPHONE

TRANSMITTER MICROPHONE BATTERY STATUS:

Turn on Power Switch on MA-202. Red light illuminates on Power & RF Signal

Indicator to denote MA-202 power is on and charged.

Ensure transmitter microphone is fully-charged. Turn on Transmitter Power Switch. Red

light should illuminate for 1-2 seconds before it dims to denote transmitter power is on

and charged.

If there a successful RF link between the transmitter and MA-202 the Power & RF

Signal Indicator will illuminate green.

Speak into the transmitter microphone directly for amplification.

The transmitter microphone can be connected and worn as a neck lanyard for

hands-free presentation or performance. Adjustable strap for ideal length and minimizes

the distance needed for optimal sound quality between the microphone and speaker's

mouth. Minimize the volume to reduce chances of feedback.

Note:

Normal or Fully Charged Battery:

Low Power Battery:

Drained Battery:

No Battery Inside or Battery Installed Incorrectly:

Red indicator illuminates for 1-2 seconds and dims when Transmitter Power Switch is

turned on.

Red indicator stays illuminated when Transmitter Power Switch is turned on. Re-charge

soon.

Red indicator does not illuminate when Transmitter Power Switch is turned on.

Recharge immediately.

Red indicator does not illuminate when Transmitter Power Switch is turned on.

Rechargeable Transmitter Microphone