User's Manual

Protection cover's patented design protects
accidental access to power switch and its rugged
material and snug fit offer protection to both power
switch and PCB during accidental drop.
Steps:
! Remove protection cover.
!
! Install the protection cover after turning will
cover up power switch.
Mute function is open for easy acsess
Reverse protection cover.
Patented Protection Cover
4
5
! When power is off, reverse-installation of
protection cover will turn on the switch
automatically. To turn off the system, remove
the cover to turn off.
! Protection cover must be attached during
operation for full protection.
! Channel identification clip can be attached to the
bottom of protection cover.
Handheld Transmitter Handheld Transmitter