Owner manual

Digital Bodypack Transmitter Digital Bodypack Transmitter
18
17
AF PHASE
INV ERT
AF PHASE
NOR MAL
AF PHASE: Phase Selection of AF inputs
a. Press MODE button for selection of AF PHASE.
Selection of NORMAL or INVERT can be
selected once the AF PHASE LCD starts
blinking.
b. Press SET button to select and set NORMAL or
INVERT.
**Note:
AF PHASE function provides users a phase
selection for different condenser microphones.
The normal setting is NORMAL, and INVERT
might be selected if two-wire condenser
microphone is used.
UNL OCK
SET LOCK
LOC K
SET LOCK
**NOTE:
1. When locked (LOCK), receiver settings
cannot be changed including the powering on
& powering off. To power off it needs to be
in unlock mode (UNLOCK).
2. A sudden lose of power will deactivate the
LOCK Function.
3. MUTE function can be operated normally
during LOCK mode.
SET LOCK: Setup and Change of Parameter Lock
a. Press MODE button once for SET LOCK display.
Once SET LOCK display starts blinking it is
ready for selection.
b. Press SET button for UNLOCK or LOCK
selection.