User Guide MTG-100a Digital Wireless Tour Guide System MTG-100Ra MTG-100Ta All rights reserved. Do not copy or forward without prior approvals MIPRO. Specifications and design subject to change without notice.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat. 9.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Digital Wireless Tour Guide System Contents 1 Product Overview 2 Key Features 3 MTG-100Ra Receiver Controls and Indicators 4 MTG-100Ta Transmitter Controls and Indicators 5 LCD Screen 5 Setting Up Receiver 8 Setting Up Transmitter 14 Battery Removal and Installation 15 Wearing Neck Lanyards 15 MTG-100Ta Transmitter Audio Input 16 MTG-100Ra Receiver Audio Input 17 Optional Microphone Accessories for MTG-100Ta Transmitters 18 Optional Earphone Accessories for MTG-100Ra Receivers Pr
Digital Wireless Tour Guide System Digital Wireless Tour Guide System MTG-100Ra Receiver Controls and Indicators Key Features !Operates on user license-free ISM bands. !Industry's only true diversity design ensures maximum reception quality and reduces signal dropouts. !Interference-free from Bluetooth, Wi-Fi and 2.4GHz wireless transmission. 1 2 3 4 !Encrypted digital technology enables secure audio transmission, preventing unauthorized listening.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System LCD Screen Displays current settings and indicators MTG-100Ta Transmitter Controls and Indicators 22 18 21 CH 12 19 20 9 11 12 10 868.125 MHz 15 18 Received/Transmitted RF Signals 19 Current Function Display 13 20 Received/Transmitted Audio Signals 14 21 Battery Level Indicator (battery icon will flash when battery level is low) 22 Locked icon 16 17 DIGITAL Antenna: Transmitting antenna.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System Volume Control To Lock Receiver Channel: ! Insert the earphones or headphones and slowly turn up the volume to a comfortable, safe sound level. ! "Mute" is lowest volume level. "VOL 20" is highest volume level. ! Press and hold both buttons seconds. ! The " " icon then appears on the display. The receiver channel is now locked and the ability to change channels manually is inoperative. 7 for approx.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System Setting Up Transmitter Channel Set-Up Press "MODE" button for one of the five functions. ! Press MODE button until CH mode appears. ! Press SET button once to activate function. CH 00 blinks once when activated. ! Press SET button increases the channel number by one. ! Press MODE button to confirm and save the change. a b c d e CH 05 868.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System Sensitivity Level Set-Up ! Audio Input Source Set-Up Gain Levels: Microphone Input (-12dB~9dB) Line Input (-12dB~3dB). ! Press MODE button until InPut mode appears. ! Press SET button once to activate function. InPut Mic or Line blinks once when activated. ! Press MODE button until Gain mode appears. ! Press SET button once to activate function. Gain 0 dB blinks once when activated.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System RF Output Power Set-Up Battery Level Status ! Press MODE button until RF mode appears. ! Press SET button once to activate function. RF Hi, Mid or Low blinks once when activated. ! Press SET button for Hi, Mid or Low power. ! Press MODE button to confirm and save the change. 100% Low or Mid setting is recommended for indoor, smaller environment. * Hi setting has 10mW RF power output.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System Battery Removal and Installation ! Slide the battery latch down and lift out of the battery cover. ! Place new, fresh 2 "AA" batteries into the slots and slide up until the latch locks into place. Wearing Neck Lanyards Insert into both side-release buckles and adjust the straps for ideal length.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System MTG-100Ra Receiver Audio Input Optional Microphone Accessories for MTG-100Ta Transmitters MM-202P: Mini-Gooseneck Microphone with 3.5mm screw-lock plug. MU-101P: Headworn Microphone with 3.5mm screw-lock plug. MU-53HNP: Premium Headworn Microphone with 3.5mm screw-lock plug. 16 17 MU-23P: Headworn Microphone with 3.5mm screw-lock plug.
Digital Wireless Tour Guide System Digital Wireless Tour Guide System Optional Earphone Accessories for MTG-100Ra Receivers E-5S: Single-sided Earphone with 3.5mm mini-jack plug E-10S: Stereo Earphones with 3.5mm mini-jack plug E-20S: Stereo Headphones with 3.