User Manual
SpirolabIII – User’s Manual Code MIR 980067 REV 0 Page 23 / 47
To cancel the current calibration factor and thus reset the calibration factor to the original value set by the manufacturer,
enter 0 (zero) in the space reserved for the FVC and FIVC values.
1 A % 8; ( 9 :'
1 7 7 98; ( :).7 2- 9? =3 :J1 7 K A98; ( ? =3 :
2 7 F( 8; ( 9 :'
1 7 7 98; ( :)..7 2 9? =3 :J1 1 .A98; ( ? =3 :
' ' ? =3
GG' )
8'
2 7 F( 8; ( J1 7 K 8; ( J1 1 7
#L
#)
Printout header text
To insert a header that will be printed at the beginning of each
spirometry report (see image).
PRINTER HEADER TEXT
INSERT YOUR PRINTER HEADING,
USING UP TO 40 CHARACTERS
¦
ESC to Quit
PRINTER HEADER TEXT
INSERT YOUR PRINTER HEADING,
USING UP TO 40 CHARACTERS
¦
ESC to Quit
Change DATE/TIME
To change the date and time.
The time is shown in the 24 hour format.
Select language
To change the language used for displaying messages on the screen and the printouts.
Select predicted values
To select one of the standards available for the calculation of the predicted values.
Select printout
To enable or disable the printout of spirometry parameters; in addition this menu allows to set-up, enable or disable the
printout of the F/V and V/t curves.
Bluetooth settings
Select this function and the following menu is shown:
• Search Device
• PRINTER Options
• PHONE Options
• Insert Phone Number
• BT TEST
Search Device
Select the required option with and confirm with
; SpirolabIII begins to search for Bluetooth active devices;
when one or more active devices are found then a list is shown, select a device and push to define the device
(with vertical scroll) as a printer or as a phone (use PRINTER or PHONE); select one of the two options and push
, otherwise push to return to the Bluetooth options.