User Manual

spirobank G User Manual cod. 980026 Rev 2.0 Page 19 of 46
To carry out a VC test
To carry out an MVV test
To display previous tests in memory
To display next test in memory
Visualize data for a test in archive
To print data in memory (through Bluetooth connection)
To transfer data through a Bluetooth connection
To exit from the selected screen and return to the main screen
WARNING
IF no key is pressed the instrument after 1 minute will ‘beep’ and if no key is
pressed after a further 10 seconds it will automatically switch off. If spirobank G is
powered by a USB connection to a PC, the aforementioned function is disabled and
the device is switched off using .
The instrument can be switched off at any time by pressing and holding the key.
2.2 Battery Level
The symbol
shown in the second screen when the unit is turned on indicates that the battery is charged.
The following symbol indicates Low Battery:
If the battery is discharged the following message appears:
BATTERY DISCHARGED
2.3 Information
Switch on spirobank G by pressing
. The display
will show: