User Manual

Spirodoc cod. 980156 Rev 1.3 EN 49/67
ENGLISH
3.13.3 Oximetry SpO2/BPM
To access the oximetry area form the main screen touch the icon, next select the
icon.
The test duration is unlimited and the aim is to record variations of the oximetry values
during a length of time decided by the doctor.
During the test the display shows the
information that appears in the image to the
right. The BEEP and ALARM icons allow to
modify the following settings:
 BEEP, allows to activate/deactivate the
heart beat acoustic signal during the
test.
 ALARM, allows to activate/deactivate the thershold alarms as descrive in
paragraph 3.6.
Unlike the sleep oximetry test, the display does not enter standby mode, thus always
remaining on.
To end the test simply touch the STOP icon.
Please refer to paragraph 4.2 for a data printout; an example can be found in the
attachments inside this user manual.
3.13.4 Instructions for Adult Single Patient Sensor
WARNING
The oximetry sensor used in the manual is only one of the different types of
sensors which can be used with SPIRODOC listed in paragraph 2.2.4. MIR does
not recommend any one particular sensor, the decision is left to the doctor who
will choose the sensor which she/he believes to be more suitable.
To perform a non-invasive continuous monitoring of arterial oxygen saturation it is
recommended to use the reusable "wrap" type sensor.
WARNING
The materials used for manufacturing the sensor are NATURAL LATEX
PROTEIN FREE, and are subject to biocompatibility tests.
WARNING
The adult single patient sensor is ideal for patients weighing more than 30 kg. It
should not be used on patients who suffer from allergic reactions to adhesive
tape. The sensor is specifically designed for single use only.