User's Manual

Spirobank II
Page 16 of 34
Rev.1.1
User manual
ICON
DESCRIPTION
To search a test starting from a specific date onwards..(partial database)
To flick through a database from beginning to end and viceversa (complete database)
Male sex patient selection
Female sex patient selection
To access all oximetry test options / To perform an SpO2/BPM test
To access spirometry testing type
to perform a forced vital capacity test FVC/search FVC tests in memory
To perform a spirometry test with a broncodilator
To check the alarms and alarm thresholds during oximetry testing
To check the alarms and alarm thresholds during oximetry testing when at least one parameter is turned OFF
Enabled alarm waring during oximetry testing
To temporarily disable the alarm
Disabled alarm warning during oximetry testing
To temporarily enable the alarm
2.5 Service menu
To enter the service menu press the key on the second screen corresponding to the icon
It is also possible to enter in the service menu when the device showa the main screen, pressing the key and then the key .
The service menu shows the following list of voices:
 Change date/time
 LCD settings
 Bluetooth suspend
 Select language
 Delete memory
 Select predicted
 Turbine calibration
 Oximetry setup
 Date format
 Unit format
 Info firmware
To select the desired voice use the keys and , then enter using the key .
Change date/time
When setting the date and time, the cursor  indicates the data item which is being modified. Use the keys and to modify
the data item of interest, move on to the next data item by pressing . Press so that the new settings will take effect and to
return to the service menu. To return to the service menu without modifying the item data press .
LCD settings
Change and set brightness and contrast using e keys. It is possible to switch from a parameter to the other using and
. To return to the service menu press .
Bluetooth suspend
The Bluetooth function is automatically activated when the device switchs on.
With this menu voice it is possible to suspend the function, the Bluetooth will come active automatically at the next device switch on.
Select language
Select the desired item using the and keysand press , the language is now set and the device will return to the Service
Menu.
Delete Memory
To delete the memory of the device insert the following password by touching the numbers shown below:
If the password was not properly inserted the message below is shown: