User guide

Maintaining the Non-Return Valves

The non-return valves are located in the valve body, and are accessible through

the inlet connectors.

Caution! Ensure that the non-return valves are installed correctly to prevent

crossﬂ ow or malfunction of the valve.

1. With the water supplies turned off

and the thermostatic mixer removed,

remove the washer, the circlip and the

ﬁ lter.

2. Remove the non-return valve and

clean any debris.

3. On reassembly ensure that the non-

return valve is ﬁ tted the correct way

round (with the arrow indicating the

ﬂ ow pointing towards the mixer).

Filter

The inlet ﬁ lters are located in the inlet connector. Clean or renew as necessary.

Thermostatic Cartridge

In hard water areas the ﬁ lters in the thermostatic cartridge may become blocked

with limescale, which will reduce the ﬂ ow of water. It is recommended that the car-

tridges are checked regularly and cleaned in a descaling solution (such as kettle

descalent) if necessary. Be sure to follow the manufacturer’s instructions on the

descalent package.

Note! The cartridge is non-servicable and will require replacement should failure

occur.

Flow Arrow

Non-return Valve

Circlip

Filter Washer