User guide

7
4. Apply suitable thread sealant (not
supplied) and attach the offset
connectors to the pipework in the
wall. Make sure that the connectors
are level and set at the correct
distance apart.
5. Tighten the connection to the pipework
while holding the offset connectors in
place using a spanner on the spanner
fl ats.
6. Fix the mounting bracket to the wall
through the small hole, using the
appropriate wall fi xings for the type
of wall (not included).
7. Screw the concealing plates onto
the offset connectors until they come
into contact with the wall. Seal with
an appropriate sealant.
Mounting Bracket
Pipework
Offset
Connector
Wall
Spanner Flats
Small Fixing Hole
Concealing Plates