User guide

13
9. Caution! It is essential at this
point that the supply pipework is
thoroughly ushed through before
connection to the bar valve.
10. Install the concealing plates,and
tighten the concealing plates until
they are ush with the nished wall.
11. Make sure that the sealing washer/
lter is tted, offer the bar valve up
to the offset connectors and tighten
the nuts.
Caution! Take care not to damage
the chrome plated surfaces.
12. Install the shower ttings.
13. Turn on the hot and cold water
supplies and check for leaks.
14. Before using the shower, refer to
section: ‘Commissioning’.
Sealing Washer/Filter