User guide

22
OPERATION
Warning! The shower is a manual mixing shower which can select water
temperatures from FULL HOT to FULL COLD. If the temperature control knob is
turned anticlockwise fully the shower will deliver water at the same temperature as
the stored hot water temperature (this will be the same temperature as the hot tap
water temperature).
Note! The shower is a manual mixing shower. The showering temperature will
change if the incoming water temperature changes. Therefore incoming water
supply temperatures must remain constant if a stable showering temperature is to
be achieved.
FLOW
TEMPERATURE
Turn
clockwise to
decrease ow.
Turn
anticlockwise
to increase
ow.
Turn
anticlockwise
for warmer
water.
Turn clockwise
for cooler
water.
Turn fully
clockwise to
stop the ow
of water.
1.1. From the "stop" position turn the ow
control knob anticlockwise to start the
ow of water.
1.2. Turn the ow control knob until the
desired ow of water is obtained.
The further the ow knob is turned
anticlockwise the greater the ow.
1.3. Turn the temperature control knob
in the direction of the red indicator
(anticlockwise) for warmer water and
in the direction of the blue indicator
(clockwise) for cooler water, until
the desired water temperature is
achieved.
1.4. Turn the ow control knob clockwise
to the "stop" position to stop the ow
of water.
Note! If the Mira Event XS is used
continuously for a prolonged period
the self-resetting thermal trip tted
may operate. This will shutdown
the pump motor and prevent it from
overheating.