User guide

26
Temperature
Indicator
Concealing
Cap
Push-t
Release Tool
Cover Retaining
Screws
Cover Retaining
Screw
Temperature
Control Knob
MAINTENANCE
1. General
Read the section 'Important Safety Information' rst.
If any maintenance is required then it must carried out by a competent tradesperson
for whom the maintenance instructions are provided. Before replacing any parts
ensure that the underlying cause of the malfunction has been resolved.
Warning! There are no user serviceable components beneath the cover of the
appliance. Only a competent tradesperson should remove the cover.
2. Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning plated or plastic ttings. These nishes should be cleaned
with a mild washing up detergent or soap solution, and then wiped dry using a soft
cloth.
3. Front Cover – Removal
Warning! Before proceeding turn off the electrical and water supplies. The electricity
supply must be turned off at the mains and , if applicable, the appropriate circuit fuse
removed. Mains electrical connections are exposed when the cover is removed.
3.1. Remove the temperature knob
concealing cap.
3.2. Insert the end of the push-t tool
under the temperature control knob,
inline with the temperature indicator,
and lever off the temperature knob.
3.3. Unscrew the three cover retaining
screws sufficiently to remove the
cover.
Note! The cover retaining screws are
captive and need not be removed.