User guide

29
5.9. Inspect inlet manifold/valve interface
seals and renew if required.
Note! When retting the inlet manifold,
lightly grease seals with a silicone
based lubricant.
5.10. Ret components in reverse order.
5.11. Restore the water supplies and check
for any leaks.
5.12. Refit the cover and secure by
tightening the three cover retaining
screws, ret the temperature control
knob and concealing cap.
5.13. Commission the Mira Event XS, refer
to section: 'Commissioning'.
Inlet Manifold /
Mixer Assembly
Interface Seals
Inlet Manifold
Outlet Ports
Ensure 'O'
seals face
the inlet
manifold
outlet ports