User guide

9
3. Electrical
3.1. Appliance power supply – 230–240 V, 50 Hz, fused at 3 Amps, via a double
pole switched fused connection unit (not supplied) with a minimum 3 mm contact
separation in each pole.
3.2. Power supply connection – The Mira Event XS is tted with a terminal block
which will accept cable up to 2.5 mm². Minimum cable size (cross-sectional
area) required under normal installation conditions is 1 mm
2
.
3.3. Absorbed power - Approximately 150 W under normal working conditions.
4. Standards
4.1. The Mira Event XS complies with all relevant directives for CE marking.